I.S. EN 13142:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS
Hardcopy , PDF
05-08-2021
English
01-01-2013
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Performance characteristics for residential
ventilation components/products
5 Manual, cleaning and maintenance
6 Marking, labelling and product information
7 Declaration and codification of mechanical supply
and exhaust ventilation units
Annex A (informative) - Additional check list for
declaration and codification for supply and
exhaust units
Annex B (informative) - Schematics for classification
and codification of balanced units and relevant
test standards
Annex C (informative) - Items to be considered in a
national annex
Bibliography
Describes the component/product performance characteristics which may be necessary for the design and dimensioning of residential ventilation systems to provide the predetermined comfort conditions of temperature, air velocity, humidity, hygiene and sound in the occupied zone.
| DocumentType |
Standard
|
| Pages |
47
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 13142 : 2013 | Identical |
| BS EN 13142:2013 | Identical |
| NBN EN 13142 : 2013 | Identical |
| NS EN 13142 : 2013 | Identical |
| DIN EN 13142:2013-06 | Identical |
| SN EN 13142 : 2013 | Identical |
| NEN EN 13142 : 2013 | Identical |
| UNI EN 13142 : 2013 | Identical |
| EN 13142:2013 | Identical |
| ONORM EN 13142 : 2013 | Identical |
| UNE-EN 13142:2004 | Identical |
| ISO 10140-2:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
| EN 13141-9:2008 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 9: Externally mounted humidity controlled air transfer device |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| ISO 10140-1:2016 | Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products |
| EN ISO 10140-1:2016 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016) |
| EN 13141-4:2011 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| EN 13141-5:2004 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 5: Cowls and roof outlet terminal devices |
| EN 13141-2:2010 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| PREN ISO 10121-2 : DRAFT 2011 | TEST METHODS FOR ASSESSING THE PERFORMANCE OF GAS-PHASE AIR CLEANING MEDIA AND DEVICES FOR GENERAL VENTILATION - PART 2: GAS PHASE AIR CLEANING DEVICES (GPACD) |
| EN 13141-1:2004 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices |
| EN ISO 10140-2:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
| EN 13141-8:2014 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room |
| EN 13141-7:2010 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings |
| EN 13141-3:2017 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use without fan |
| EN 13141-10:2008 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 10: Humidity controlled extract air terminal device |
| ISO 10140-3:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation |
| ISO 10140-5:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment |
| EN 13141-6:2014 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling |
| EN 12097:2006 | Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.