API 500 : 2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
Amended by
Available format(s)
Hardcopy , PDF
Superseded date
05-10-2021
Superseded by
Published date
12-01-2012
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative References
3 Terms, Definitions, and Acronyms
4 Basic Conditions for a Fire or Explosion
5 Flammable and Combustible Liquids, Gases
and Vapors
6 Classification Criteria
7 Extent of a Classified Location
8 Recommendations for Determining Degree and
Extent of Classified Locations - Common
Applications
9 Recommendations for Determining Degree and
Extent of Classified Locations in Petroleum
Refineries
10 Recommendations for Determining Degree and
Extent of Classified Locations at Drilling Rigs
and Production Facilities on Land and on Marine Fixed
Platforms
11 Recommendations for Determining Degree and Extent
of Classified Locations on Mobile Offshore Drilling
Units (MODUs)
12 Recommendations for Determining Degree and Extent
of Classified Locations at Drilling Rigs
and Production Facilities on Floating Production Units
13 Reserved for Future Use
14 Recommendations for Determining Degree and Extent
of Classified Locations at Petroleum Pipeline
Transportation Facilities
Annex A (informative) - Sample Calculation to Achieve
Adequate Ventilation of an Enclosed Area by
Natural Means Using Equation 1 and Equation 2
Annex B (informative) - Calculation of Minimum Air
Introduction Rate to Achieve Adequate Ventilation
Using Fugitive Emissions
Annex C (informative) - Development of Ventilation Criteria
Annex D (informative) - An Alternate Method for Area
Classification
Annex E (informative) - Procedure for Classifying Locations
Annex F (informative) - Preferred Symbols for Denoting Class I,
Division 1 and Division 2 Hazardous (Classified) Locations
Gives guidelines for classifying locations Class I, Division 1 and Class I, Division 2 at petroleum facilities for the selection and installation of electrical equipment.
| DevelopmentNote |
Supersedes API 500A, API 500B and API 500C. (08/2002) Russian edition of 2ED 1997 is also available, see API 500 RUSSIAN. (12/2012) Also available in Kazakh version, see API 500 KAZAKH. (02/2016)
|
| DocumentType |
Standard
|
| Pages |
192
|
| ProductNote |
NEW CHILD ERR 1 2014 IS NOW ADDED This product is unavailable in Cuba, Iran, North Korea, Syria
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API 49 RUSSIAN : 2001 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API MPM CH3.3 : 1996 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 3 - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY PRESSURIZED STORAGE TANKS BY AUTOMATIC TANK GAUGING |
| API 555 : 2013 | PROCESS ANALYZERS |
| API 676 CHINESE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| 11/30246055 DC : 0 | BS EN ISO 13705 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
| API MPM CH7 : 2001 : INC : ADD 2 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
| API 11S3 :1999 | RECOMMENDED PRACTICE FOR ELECTRICAL SUBMERSIBLE PUMP INSTALLATIONS |
| 01/208810 DC : 0 | IEC 62185 ED.2 - INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES |
| API 11S4:2002 | RECOMMENDED PRACTICE FOR SIZING AND SELECTION OF ELECTRIC SUBMERSIBLE PUMP INSTALLATIONS |
| API 55 :1995 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
| BS EN 61285:2015 | Industrial-process control. Safety of analyzer houses |
| API RP 74 : 2001 : R2013 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API RP 75:2004 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| API RP 76 : 2007 | CONTRACTOR SAFETY MANAGEMENT FOR OIL AND GAS DRILLING AND PRODUCTION OPERATIONS |
| I.S. EN ISO 13354:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SHALLOW GAS DIVERTER EQUIPMENT (ISO 13354:2014) |
| API 2350 : 2012 | OVERFILL PROTECTION FOR STORAGE TANKS IN PETROLEUM FACILITIES |
| API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
| API MPM CH21.2:1998 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 21: FLOW MEASUREMENT USING ELECTRONIC METERING SYSTEMS - SECTION 2: ELECTRONIC LIQUID VOLUME MEASUREMENT USING POSITIVE DISPLACEMENT AND TURBINE METERS |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| NFPA 87 : 2018 | FLUID HEATERS |
| NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
| BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
| I.S. EN ISO 13705:2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE (ISO 13705:2012) |
| PIP ELCGL01 : 2013 | ELECTRICAL DESIGN CRITERIA |
| API MPM CH7.3 : 2011(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
| API 92U : 2008 | UNDERBALANCED DRILLING OPERATIONS |
| API 92U : 2008 : R2013 | UNDERBALANCED DRILLING OPERATIONS |
| API 76 REDLINE : 2007 | CONTRACTOR SAFETY MANAGEMENT FOR OIL AND GAS DRILLING AND PRODUCTION OPERATIONS |
| API MPM CH7.4 : 2018 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATURE DETERMINATION - SECTION 4 - DYNAMIC TEMPERATURE MEASUREMENT |
| API 16D : 2004 : R2013 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
| PREN ISO 13705 : DRAFT 2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
| API Std 53 RUSSIAN:1997 | RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| API MPM CH7 : 2001 : INC : ADD 1 : 2011 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
| API MPM CH16.2 : 1994 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 16 - MEASUREMENT OF HYDROCARBON FLUIDS BY WEIGHT OR MASS - SECTION 2 - MASS MEASUREMENT OF LIQUID HYDROCARBONS IN VERTICAL CYLINDRICAL STORAGE TANKS BY HYDROSTATIC TANK GAUGING |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| API MPM CH7 : 2001 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
| API MPM CH3.1B SPANISH : 2001(R2006) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 : TANK GAUGING - SECTION 1B: STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| API MPM CH7 : 2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
| NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 | FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS |
| API 560 : 2016 | FIRED HEATERS FOR GENERAL REFINERY SERVICE |
| API 2C RUSSIAN : 2004 | SPECIFICATION FOR OFFSHORE PEDESTAL MOUNTED CRANES |
| API MPM CH21.2 : 1998(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 21: FLOW MEASUREMENT USING ELECTRONIC METERING SYSTEMS - SECTION 2: ELECTRONIC LIQUID VOLUME MEASUREMENT USING POSITIVE DISPLACEMENT AND TURBINE METERS |
| C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
| API 14G :2007(R2013) | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
| I.S. EN ISO 10440-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
| ISA RP92.04.02-2 : 1996 | INSTALLATION, OPERATION, AND MAINTENANCE OF INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
| NFPA 1 : 2021 | FIRE CODE |
| C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
| I.S. EN ISO 13702:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - CONTROL AND MITIGATION OF FIRES AND EXPLOSIONS ON OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES (ISO 13702:2015) |
| ISA 92.04.01-1 : 2007 | PERFORMANCE REQUIREMENTS FOR INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| API MPM CH3.3 : 1996 : R2006 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 3 - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY PRESSURIZED STORAGE TANKS BY AUTOMATIC TANK GAUGING |
| API 2510A : 1996 : R2015 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
| API 676 REDLINE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| API 11S3 : 1999 : R2008 | RECOMMENDED PRACTICE FOR ELECTRICAL SUBMERSIBLE PUMP INSTALLATIONS |
| API 55 : 1995 : R2013 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API MPM CH3.1B : 2001(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 1B - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
| 15/30303554 DC : 0 | BS ISO 18647 - SPECIFICATIONS FOR OFFSHORE MODULAR DRILLING RIGS ON FIXED PLATFORMS |
| API 1129 : 1996 | ASSURANCE OF HAZARDOUS LIQUID PIPELINE SYSTEM INTEGRITY |
| 04/30114086 DC : DRAFT JUL 2004 | EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE) |
| 10/30215694 DC : 0 | BS ISO 18132-3 - REFRIGERATED HYDROCARBON FLUIDS AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK GAUGES - PART 3: AUTOMATIC TANK GAUGES FOR LIQUEFIED PETROLEUM AND CHEMICAL GASES ON BOARD MARINE CARRIERS AND FLOATING STORAGE |
| API MPM CH16.2 : 1994 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 16 - MEASUREMENT OF HYDROCARBON FLUIDS BY WEIGHT OR MASS - SECTION 2 - MASS MEASUREMENT OF LIQUID HYDROCARBONS IN VERTICAL CYLINDRICAL STORAGE TANKS BY HYDROSTATIC TANK GAUGING |
| API 53 RUSSIAN : 1997 : R2004 | RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| API 49 : 2001 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API 54 RUSSIAN : 19991 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| BS ISO 18132-3:2011 | Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. General requirements for automatic tank gauges Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage |
| 13/30249806 DC : 0 | BS EN ISO 13354 - PETROLEUM AND NATURAL GAS INDUSTRIES - SHALLOW GAS DIVERTER EQUIPMENT |
| 06/30127203 DC : DRAFT OCT 2006 | ISO 15138 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR CONDITIONING |
| 03/305413 DC : DRAFT APR 2003 | IEC 61285 ED. 2.0 - INDUSTRIAL PROCESS CONTROL - SAFETY OF ANALYZER HOUSES |
| API 64 RUSSIAN : 2001 | RECOMMENDED PRACTICE FOR DIVERTER SYSTEMS EQUIPMENT AND OPERATIONS |
| CSA PLUS 2203 : 2001 | HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES |
| API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| 05/30127458 DC : DRAFT JAN 2005 | ISO 13705 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
| API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
| API MPM CH7.3:2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
| NFPA 8501 : 1997 | SINGLE BURNER BOILER OPERATION |
| IEEE 1017-2013 | IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable |
| API 619 REDLINE : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 2021A : 1998 | INTERIM STUDY - PREVENTION AND SUPPRESSION OF FIRES IN LARGE ABOVEGROUND ATMOSPHERIC STORAGE TANKS |
| API MPM CH21.2 : 1998 : INC : ADD 1 : 2000 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 21: FLOW MEASUREMENT USING ELECTRONIC METERING SYSTEMS - SECTION 2: ELECTRONIC LIQUID VOLUME MEASUREMENT USING POSITIVE DISPLACEMENT AND TURBINE METERS |
| API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 651 : 2014 | CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS |
| API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| API 2510 : 2001 : R2011 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
| API 75 : 2019 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| BS EN ISO 13705:2012 | Petroleum, petrochemical and natural gas industries. Fired heaters for general refinery service |
| BS EN ISO 10440-1:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free) |
| ISO 28300:2008 | Petroleum, petrochemical and natural gas industries — Venting of atmospheric and low-pressure storage tanks |
| BS EN ISO 13702:2015 | Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines |
| UNI EN ISO 28300 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| UNI EN ISO 10440-1 : 2008 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
| UNI EN ISO 13705 : 2013 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
| CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
| API MPM CH21.2 : 1998 : R2004 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 21: FLOW MEASUREMENT USING ELECTRONIC METERING SYSTEMS - SECTION 2: ELECTRONIC LIQUID VOLUME MEASUREMENT USING POSITIVE DISPLACEMENT AND TURBINE METERS |
| API MPM CH7.3 SPANISH : 2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
| API MPM CH3.1B : 2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 1B - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
| 13/30271477 DC : 0 | BS EN 61285 ED 3.0 - INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYSER HOUSES |
| API 618 : 2007 : R2016 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API MPM CH7 : 2001 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
| UNI EN ISO 13354 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SHALLOW GAS DIVERTER EQUIPMENT |
| API 16D RUSSIAN : 2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
| BS ISO 18132-1:2011 | Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. General requirements for automatic tank gauges Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage |
| API 75L : 2007 : R2013 | GUIDANCE DOCUMENT FOR THE DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT SYSTEM FOR ONSHORE OIL AND NATURAL GAS PRODUCTION OPERATIONS AND ASSOCIATED ACTIVITIES |
| API 2510A : 1996 : R2010 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
| API 75 : 2004 : R2013 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| API 55 : 1995 : R2007 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API RP 68 : 1998 | RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API 11S4 : 2002 : R2008 | RECOMMENDED PRACTICE FOR SIZING AND SELECTION OF ELECTRIC SUBMERSIBLE PUMP INSTALLATIONS |
| API 552 : 1994 | TRANSMISSION SYSTEMS |
| 04/30127186 DC : DRAFT DEC 2004 | ISO 23251 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
| API 546 : 2008 | BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
| I.S. EN 61285:2015 | INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES |
| API STD 676 : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| IEEE 45.1-2017 | IEEE Recommended Practice for Electrical Installations on Shipboard--Design |
| API 92M : 2017 | MANAGED PRESSURE DRILLING OPERATIONS WITH SURFACE BACK-PRESSURE |
| API 49 RUSSIAN : 2001 : R2007 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
| NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
| API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 11S4 : 2002 : R2013 | RECOMMENDED PRACTICE FOR SIZING AND SELECTION OF ELECTRIC SUBMERSIBLE PUMP INSTALLATIONS |
| API 54 :1999 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| API 54 : 1999 : R2013 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| API MPM CH16.2:1994 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 16 - MEASUREMENT OF HYDROCARBON FLUIDS BY WEIGHT OR MASS - SECTION 2 - MASS MEASUREMENT OF LIQUID HYDROCARBONS IN VERTICAL CYLINDRICAL STORAGE TANKS BY HYDROSTATIC TANK GAUGING |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| API 14G : 2007 | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| ABS 0057 : 2017 COR 2017 | GUIDE FOR THE CLASSIFICATION OF DRILLING SYSTEMS |
| API RP 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| I.S. EN ISO 13709:2009 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| BS EN ISO 28300:2008 | Petroleum, petrochemical and natural gas industries. Venting of atmospheric and low-pressure storage tanks |
| ISO 13354:2014 | Petroleum and natural gas industries Drilling and production equipment Shallow gas diverter equipment |
| UNE-EN ISO 28300:2012 | Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008) |
| ISO 13705:2012 | Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service |
| 12/30210113 DC : 0 | BS EN ISO 28300 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
| IEC 61285:2015 | Industrial-process control - Safety of analyser houses |
| EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
| EI 1540 : 2014 | DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES |
| EI MODEL CODE SAFE PRACTICE PT7 : 1998 | DESIGN, CONSTRUCTION, OPERATION AND MAINTENANCE OF AVIATION FUELLING FACILITIES |
| EN ISO 13354:2014 | Petroleum and natural gas industries - Drilling and production equipment - Shallow gas diverter equipment (ISO 13354:2014) |
| EN ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007) |
| EN ISO 13705:2012 | Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2012) |
| API 618 : 2007 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API PUBL 2510A : 1996 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
| API MPM CH3.3 : 1996(R2017) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 3 - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY PRESSURIZED STORAGE TANKS BY AUTOMATIC TANK GAUGING |
| API 676 : 2009 : R2015 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| API RP 75 CHINESE : 2004 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| API 9100B : 1998 | GUIDANCE DOCUMENT FOR MODEL EHS MANAGEMENT SYSTEM |
| API 49 : 2001 : R2013 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API 54 RUSSIAN : 1999 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| 10/30210537 DC : DRAFT JUNE 2010 | BS ISO 18132-1 - REFRIGERATED HYDROCARBON FLUIDS AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK GAUGES - PART 1: AUTOMATIC TANK GAUGES FOR LIQUEFIED NATURAL GAS ON BOARD MARINE CARRIERS AND FLOATING STORAGE |
| API 675 : 2012 | POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
| ABS 0063 : 2018 COR 2018 | RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS |
| API 76 : 2007 : R2013 | CONTRACTOR SAFETY MANAGEMENT FOR OIL AND GAS DRILLING AND PRODUCTION OPERATIONS |
| DIN EN ISO 28300:2008-11 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| API 99 : 2014 | FLASH FIRE RISK ASSESSMENT FOR THE UPSTREAM OIL AND GAS INDUSTRY |
| API MPM CH3.3 : 1996 : R2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 3 - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY PRESSURIZED STORAGE TANKS BY AUTOMATIC TANK GAUGING |
| BS EN ISO 13354:2014 | Petroleum and natural gas industries. Drilling and production equipment. Shallow gas diverter equipment |
| API 68 : 1998 : R2010 | RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API RP 74 : 2001 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API 16D CHINESE : 2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
| API 2C : 2012 | OFFSHORE PEDESTAL-MOUNTED CRANES |
| API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API RP 74 : 2001 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API 16D:2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
| API 691 : 2017 | RISK-BASED MACHINERY MANAGEMENT |
| API 75L : 2007 | GUIDANCE DOCUMENT FOR THE DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT SYSTEM FOR ONSHORE OIL AND NATURAL GAS PRODUCTION OPERATIONS AND ASSOCIATED ACTIVITIES |
| API 75 CHINESE : 2004 : R2008 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| ISO 18132-3:2011 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 3: Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage |
| API RP 11S3:1999(R2013) | Recommended Practice for Electrical Submersible Pump Installations<br> |
| IEEE 1349-2011 REDLINE | IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations |
| API 53 : 2012 | BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| API MPM CH16.2 : 1994(R2017) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 16 - MEASUREMENT OF HYDROCARBON FLUIDS BY WEIGHT OR MASS - SECTION 2 - MASS MEASUREMENT OF LIQUID HYDROCARBONS IN VERTICAL CYLINDRICAL STORAGE TANKS BY HYDROSTATIC TANK GAUGING |
| API MPM CH21.2 : 1998 : R2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 21: FLOW MEASUREMENT USING ELECTRONIC METERING SYSTEMS - SECTION 2: ELECTRONIC LIQUID VOLUME MEASUREMENT USING POSITIVE DISPLACEMENT AND TURBINE METERS |
| ISO 18132-1:2011 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 1: Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API 2510 : 2001 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
| API 651 CHINESE : 2014 | CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS |
| API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| NFPA 1 : 2018 | FIRE CODE |
| DIN EN ISO 28300:2012-02 (Draft) | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| EN ISO 13702:1999 | Petroleum and natural gas industries - Control and migration of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999) |
| EN 61285:2015 | Industrial-process control - Safety of analyzer houses |
| PIP ELEHA01 : 2016 | ENGINEERING GUIDE FOR DETERMINING ELECTRICAL AREA CLASSIFICATION |
| PIP PNE00003 : 2013 | PROCESS UNIT AND OFFSITES LAYOUT GUIDE |
| API STD 2350:2020 | Overfill Prevention for Storage Tanks in Petroleum Facilities |
| NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| CFR 33(PTS1-199) : JUL 89 | NAVIGATION AND NAVIGABLE WATERS |
| CFR 46(PTS90-139) : OCT 2017 | SHIPPING - COAST GUARD, DEPARTMENT OF TRANSPORTATION |
| ISA 12.01.01 : 2009 | DEFINITIONS AND INFORMATION PERTAINING TO ELECTRICAL EQUIPMENT IN HAZARDOUS (CLASSIFIED) LOCATIONS |
| API 343 : 1998 | FUGITIVE EMISSIONS FROM EQUIPMENT LEAKS 2: CALCULATION PROCEDURES FOR PETROLEUM INDUSTRY FACILITIES |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| IEC 61779-6:1999 | Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases |
| API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
| ISA TR12.24.01 : 1998 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS CLASSIFIED AS CLASS 1, ZONE 0, ZONE 1, OR ZONE 2 |
| ISA TR12.13.01 : 1999 | FLAMMABILITY CHARACTERISTICS OF COMBUSTIBLE GASES AND VAPORS |
| NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
| NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
| NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
| AGA XL1001 : 0 | CLASSIFICATIONS OF LOCATIONS FOR ELECTRICAL INSTALLATIONS IN GAS UTILITY AREAS |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| ISA 60079-2 : 2010(R2015) | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURES 'P' |
| API 4615 : 1994 | EMISSION FACTORS FOR OIL AND GAS PRODUCTION OPERATIONS |
| ASHRAE HDBK FUNDAMENTALS : 2013 | ASHRAE HANDBOOK - FUNDAMENTALS |
| API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| NFPA ELEC INSTALLATIONS IN HAZ LOCATIONS : 2008 | ELECTRICAL INSTALLATIONS IN HAZARDOUS LOCATIONS |
| IMO IA811 : 2001 | MOBILE OFFSHORE DRILLING UNITS (MODU) CODE, CONSOLIDATED |
| ISA 12.13.01 : 2003 | PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS |
| IEEE C2-2017 | NATIONAL ELECTRICAL SAFETY CODE (NESC)(R) |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEEE 1349-2011 REDLINE | IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations |
| IP 15 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| ISA RP12.13.02 : 2003 | INSTALLATION, OPERATION, AND MAINTENANCE OF COMBUSTIBLE GAS DETECTION INSTRUMENTS |
| CFR 49(PTS178-199) : OCT 2017 | TRANSPORTATION |
| CFR 29(PT1926) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| API 14G : 2007 | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| ISO 23251:2006 | Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems |
| API 4589 : 1993 | Fugitive Hydrocarbon Emissions from Oil and Gas Production Operations |
| ISA 51.1 : 1979 | PROCESS INSTRUMENTATION TERMINOLOGY |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| CSA PLUS 2203 : 2001 | HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.