API 75 : 2004
Withdrawn
Withdrawn
RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES
Published date
01-01-2013
Publisher
Withdrawn date
08-19-2025
Sorry this product is not available in your region.
1 GENERAL
2 SAFETY AND ENVIRONMENTAL INFORMATION
3 HAZARDS ANALYSIS
4 MANAGEMENT OF CHANGE
5 OPERATING PROCEDURES
6 SAFE WORK PRACTICES
7 TRAINING
8 ASSURANCE OF QUALITY AND MECHANICAL INTEGRITY
OF CRITICAL EQUIPMENT
9 PRE-STARTUP REVIEW
10 EMERGENCY RESPONSE AND CONTROL
11 INVESTIGATION OF INCIDENTS
12 AUDIT OF SAFETY AND ENVIRONMENTAL MANAGEMENT
PROGRAM ELEMENTS
13 RECORDS AND DOCUMENTATION
APPENDIX A - CONTRACTOR SELECTION CRITERIA
APPENDIX B - INDUSTRY CODES, PRACTICES, AND
STANDARDS
APPENDIX C - REFERENCES
APPENDIX D - DEFINITIONS
APPENDIX E - PERFORMANCE MEASURES
Describes the identification and management of safety hazards and environmental impacts in design, construction, start-up, operation, inspection, and maintenance, of new, existing, or modified drilling and production facilities.
| DevelopmentNote |
Also available as Chinese version, see API 75 CHINESE. (04/2015)
|
| DocumentType |
Standard
|
| PublisherName |
American Petroleum Institute
|
| Status |
Withdrawn
|
| API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
| I.S. EN ISO 13702:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - CONTROL AND MITIGATION OF FIRES AND EXPLOSIONS ON OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES (ISO 13702:2015) |
| I.S. EN ISO 17776:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - MAJOR ACCIDENT HAZARD MANAGEMENT DURING THE DESIGN OF NEW INSTALLATIONS (ISO 17776:2016) |
| ISO 27914:2017 | Carbon dioxide capture, transportation and geological storage — Geological storage |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| ISO 17776:2016 | Petroleum and natural gas industries — Offshore production installations — Major accident hazard management during the design of new installations |
| ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
| BS EN ISO 17776:2016 | Petroleum and natural gas industries. Offshore production installations. Major Accident hazard management during the design of new installations |
| BS EN ISO 13702:2015 | Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines |
| API 97 : 2013 | WELL CONSTRUCTION INTERFACE DOCUMENT GUIDELINES |
| API RP 74 : 2001 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API 17V : 2015 | RECOMMENDED PRACTICE FOR ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR SUBSEA APPLICATIONS |
| API TR 17TR12 : 2015 | CONSIDERATION OF EXTERNAL PRESSURE IN THE DESIGN AND PRESSURE RATING OF SUBSEA EQUIPMENT |
| API RP 74 : 2001 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API 96 : 2013 | DEEPWATER WELL DESIGN AND CONSTRUCTION |
| API RP 74 : 2001 : R2013 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API 65 : 2002 | CEMENTING SHALLOW WATER FLOW ZONES IN DEEPWATER WELLS |
| API 65 : 2002 INC ERR 1:2003 | CEMENTING SHALLOW WATER FLOW ZONES IN DEEPWATER WELLS |
| API 2FB : 2006 : R2012 | RECOMMENDED PRACTICE FOR THE DESIGN OF OFFSHORE FACILITIES AGAINST FIRE AND BLAST LOADING |
| API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
| API RP 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| DIN EN ISO 17776:2003-09 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - GUIDELINES ON TOOLS AND TECHNIQUES FOR HAZARD IDENTIFICATION AND RISK ASSESSMENT |
| API T 1 : 2016 | CREATING ORIENTATION PROGRAMS FOR PERSONNEL GOING OFFSHORE |
| API 75L : 2007 | GUIDANCE DOCUMENT FOR THE DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT SYSTEM FOR ONSHORE OIL AND NATURAL GAS PRODUCTION OPERATIONS AND ASSOCIATED ACTIVITIES |
| API 2A LRFD : 1993 | RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN |
| ASTM F 3257 : 2017 | Standard Guide for Design, Construction, and Operation of Vessels Providing Accommodation Service to Offshore Installations |
| API 65 RUSSIAN : 2002 | CEMENTING SHALLOW WATER FLOW ZONES IN DEEPWATER WELLS |
| API 65 : 2002 INC ERR 1:2003 (R2012) | CEMENTING SHALLOW WATER FLOW ZONES IN DEEPWATER WELLS |
| API 53 : 2012 | BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| API 14G : 2007 | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| API 14G :2007(R2013) | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| EN ISO 17776:2016 | Petroleum and natural gas industries - Offshore production installations - Major Accident hazard management during the design of new installations (ISO 17776:2016) |
| API 2FB:2006 | RECOMMENDED PRACTICE FOR THE DESIGN OF OFFSHORE FACILITIES AGAINST FIRE AND BLAST LOADING |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| API 75L : 2007 : R2013 | GUIDANCE DOCUMENT FOR THE DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT SYSTEM FOR ONSHORE OIL AND NATURAL GAS PRODUCTION OPERATIONS AND ASSOCIATED ACTIVITIES |
| API 9100B : 1998 | GUIDANCE DOCUMENT FOR MODEL EHS MANAGEMENT SYSTEM |
| BS ISO 27914:2017 | Carbon dioxide capture, transportation and geological storage. Geological storage |
| EN ISO 13702:1999 | Petroleum and natural gas industries - Control and migration of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999) |
| API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 76 : 2007 : R2013 | CONTRACTOR SAFETY MANAGEMENT FOR OIL AND GAS DRILLING AND PRODUCTION OPERATIONS |
| API RP 76 : 2007 | CONTRACTOR SAFETY MANAGEMENT FOR OIL AND GAS DRILLING AND PRODUCTION OPERATIONS |
| API 76 REDLINE : 2007 | CONTRACTOR SAFETY MANAGEMENT FOR OIL AND GAS DRILLING AND PRODUCTION OPERATIONS |
| API 2007 : 2ED 83 | SAFE MAINTENANCE PRACTICES IN REFINERIES |
| API STD 1104:2013 | WELDING OF PIPELINES AND RELATED FACILITIES |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| API 4G : 2012 | OPERATION, INSPECTION, MAINTENANCE, AND REPAIR OF DRILLING AND WELL SERVICING STRUCTURES |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API SPEC 4F : 2013 | SPECIFICATION FOR DRILLING AND WELL SERVICING STRUCTURES |
| API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
| API 510 : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| API 2217A : 2009 | SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| API 2004 : 1ED 84 | INSPECTION FOR FIRE PROTECTION |
| API E2 : 2006 | BULLETIN ON MANAGEMENT OF NATURALLY OCCURRING RADIOACTIVE MATERIALS (NORM) IN OIL AND GAS PRODUCTION |
| API 2015 : 2014 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| API T 1 : 2016 | CREATING ORIENTATION PROGRAMS FOR PERSONNEL GOING OFFSHORE |
| API 1107 : 1991 | PIPELINE MAINTENANCE WELDING PRACTICES |
| API 2C : 2012 | OFFSHORE PEDESTAL-MOUNTED CRANES |
| API RP 2207 : 2017 | PREPARING TANK BOTTOMS FOR HOT WORK |
| API 14G : 2007 | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
| API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
| API 53 : 2012 | BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| API 2D : 2014 | OPERATION AND MAINTENANCE OF OFFSHORE CRANES |
Summarise
Sorry this product is not available in your region.