IPC TM 650 : 0
Current
Current
The latest, up-to-date edition.
TEST METHODS MANUAL
Available format(s)
Hardcopy
Language(s)
English
Published date
06-06-2012
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Includes over 150 industry-consensus procedures for electrical, environmental, mechanical, and chemical test on types of printed wiring boards and connectors.
| DocumentType |
Standard
|
| ISBN |
1-580981-38-0
|
| Pages |
1306
|
| PublisherName |
Institute of Printed Circuits
|
| Status |
Current
|
| MIL-STD-2166 Base Document:1984 | CONNECTION, ELECTRICAL COMPLAINT PIN |
| IPC 9151 : D | PRINTED BOARD PROCESS CAPABILITY, QUALITY, AND RELATIVE RELIABILITY (PCQR[2]) BENCHMARK TEST STANDARD AND DATABASE |
| 15/30331587 DC : 0 | BS EN 61189-5-503 - TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-503: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - CONDUCTIVE ANODIC FILAMENTS (CAF) TESTING OF CIRCUIT BOARDS |
| BS EN IEC 61189-5-503:2017 | Test methods for electrical materials, printed board and other interconnection structures and assemblies General test method for materials and assemblies. Conductive anodic filaments (CAF) testing of circuit boards |
| IPC 6017 : 0 | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR PRINTED BOARDS CONTAINING EMBEDDED PASSIVE DEVICES |
| MIL P 13949 : G (1) SUPP 1 | SHEET, PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR |
| IEC PAS 62190:2000 | Moisture/reflow sensivity classification for nonhermetic solid state surface mount devices |
| IEC 61189-5-503:2017 | Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards |
| I.S. EN 61191-2:2017 | PRINTED BOARD ASSEMBLIES - PART 2: SECTIONAL SPECIFICATION - REQUIREMENTS FOR SURFACE MOUNT SOLDERED ASSEMBLIES |
| BS EN 61191-3:2017 | Printed board assemblies Sectional specification. Requirements for through-hole mount soldered assemblies |
| IEC PAS 62250:2001 | Qualification and performance specification for rigid printed boards (IPC 6012A with Amendment 1) |
| PD IEC/PAS 61249-8-1:2014 | Qualification and performance of electrical insulating compound for printed wiring assemblies |
| IEC 61191-4:2017 | Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies |
| BS EN 61191-1:2013 | Printed board assemblies Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| EN 61189-5-1:2016 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General test methods for materials and assemblies - Guidance for printed board assemblies |
| EN 61189-5-503:2017 | Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards |
| I.S. EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013 (EQV)) |
| IPC J STD 002 CHINESE : C | SOLDERABILITY TESTS FOR COMPONENT LEADS, TERMINATIONS, LUGS, TERMINALS AND WIRES |
| IPC 2222 GERMAN : A | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| IPC 2222 FRENCH : A2010 | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| MIL-PRF-50884 Revision F:2014 | Printed Wiring Board, Flexible or Rigid-Flex, General Specification for |
| IPC FC 250 : A1986 | SPECIFICATION FOR SINGLE AND DOUBLE-SIDED FLEXIBLE PRINTED WIRING |
| IPC 4554 CHINESE : - | SPECIFICATION FOR IMMERSION TIN PLATING FOR PRINTED CIRCUIT BOARDS |
| IPC AJ 820 : A | ASSEMBLY AND JOINING HANDBOOK |
| MIL-C-28809 Revision B:1988 | CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE & RIGID FLEX |
| IPC 6012 RUSSIAN : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
| IPC J STD 001 SWEDISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 DANISH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 003 CHINESE : B | SOLDERABILITY TESTS FOR PRINTED BOARDS |
| MIL P 50884 : E | PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR |
| IPC J STD 001 RUSSIAN : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 SPANISH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC S 815 : B1987 | GENERAL REQUIREMENTS FOR SOLDERING OF ELECTRONIC INTERCONNECTIONS |
| IPC SPVC-LAT1 : 2010 | ANALYTICAL PROCEDURES FOR PORTABLE LEAD-FREE ALLOY TEST DATA |
| MIL-PRF-71226 Base Document:1996 | ARMAMENTS AND MUNITIONS, STANDARD PROVISIONS, GENERAL SPECIFICATION FOR |
| IPC J STD 005 RUSSIAN : A | REQUIREMENTS FOR SOLDERING FLUXES |
| IPC J STD 001 TURKISH : E2010 | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 004 RUSSIAN : B | REQUIREMENTS FOR SOLDERING FLUXES |
| IPC J STD 001 POLISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 ROMANIAN : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC 2223 CHINESE : C | SECTIONAL DESIGN STANDARD FOR FLEXIBLE PRINTED BOARDS |
| IPC A 600 SWEDISH : H | ACCEPTABILITY OF PRINTED BOARDS |
| IPC A 600 JAPANESE : H | ACCEPTABILITY OF PRINTED BOARDS |
| IPC A 600 CHINESE : G | ACCEPTABILITY OF PRINTED BOARDS |
| IPC 2221 GERMAN : B | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| IPC 1601 GERMAN : - | PRINTED BOARD HANDLING AND STORAGE GUIDELINES |
| IPC 6012 POLISH : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
| IPC QL 653 : A | Certification of Facilities that Inspect/Test Printed Boards, Components & Materials |
| MIL-PRF-55110 Revision H:2014 | Printed Wiring Board, Rigid, General Specification for |
| IPC 9241 : 2016 | GUIDELINES FOR MICROSECTION PREPARATION |
| MIL-PRF-31032-2 Revision C:2017 | PRINTED WIRING BOARD, RIGID, SINGLE AND DOUBLE LAYER, THERMOSETTING RESIN BASE MATERIAL, WITH OR WITHOUT PLATED-THROUGH HOLES, FOR SOLDERED PART MOUNTING |
| IPC 7092 : 0 | DESIGN AND ASSEMBLY PROCESS IMPLEMENTATION FOR EMBEDDED COMPONENTS |
| IPC A 600 GERMAN : H | ACCEPTABILITY OF PRINTED BOARDS |
| IPC A 610 CZECH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| MIL-PRF-31032-1 Revision D:2017 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOSETTING RESIN BASE MATERIAL, WITH OR WITHOUT BLIND AND BURIED PLATED-THROUGH HOLES, FOR SOLDERED PART MOUNTING |
| IPC A 610 GERMAN : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 600 POLISH : H | ACCEPTABILITY OF PRINTED BOARDS |
| IPC A 610 HINDI : E2010 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC 5704 : 0 | CLEANLINESS REQUIREMENTS FOR UNPOPULATED PRINTED BOARDS |
| IPC A 600 RUSSIAN : H | ACCEPTABILITY OF PRINTED BOARDS |
| IPC 2222 CHINESE : A | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| IPC 5702 : 0 | GUIDELINES FOR OEMS IN DETERMINING ACCEPTABLE LEVELS OF CLEANLINESS OF UNPOPULATED PRINTED BOARDS |
| IPC A 610 ESTONIAN : E2010 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 POLISH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 DUTCH : F2014 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC CH 65 : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
| IPC 4204 CHINESE : A2011 AMD 1 2013 | FLEXIBLE METAL-CLAD DIELECTRICS FOR USE IN FABRICATION OF FLEXIBLE PRINTED CIRCUITRY |
| MIL-F-14256 Revision F:1993 | FLUX, SOLDERING, LIQUID (ROSIN BASE) |
| IPC CH 65 CHINESE : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
| MIL-P-46843 Revision C:1989 | PRINTED WIRING ASSEMBLIES PRODUCTION OF |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| IPC A 610 ITALIAN : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 FRENCH : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| MIL-PRF-31032-4 Revision C:2017 | PRINTED WIRING BOARD, RIGID FLEX OR FLEXIBLE, MULTILAYER, WITH PLATED-THROUGH HOLES, WITH OR WITHOUT STIFFENERS, FOR SOLDERED PART MOUNTING |
| IPC A 610 KOREAN : F2014 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| MIL-PRF-31032-6 Revision B:2017 | PRINTED WIRING BOARD, RIGID, SINGLE AND DOUBLE SIDED, THERMOPLASTIC RESIN BASE MATERIAL, WITH OR WITHOUT PLATED-THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS |
| IPC 2152 : 0 | STANDARD FOR DETERMINING CURRENT CARRYING CAPACITY IN PRINTED BOARD DESIGN |
| MIL-PRF-31032-3 Revision C:2017 | PRINTED WIRING BOARD, FLEXIBLE, SINGLE AND DOUBLE LAYER, WITH OR WITHOUT PLATED-THROUGH HOLES, WITH OR WITHOUT STIFFENERS, FOR SOLDERED PART MOUNTING |
| IPC HDBK 850 : 0 | GUIDELINES FOR DESIGN, SELECTION AND APPLICATION OF POTTING MATERIALS AND ENCAPSULATION PROCESSES USED FOR ELECTRONICS PRINTED CIRCUIT BOARD ASSEMBLY |
| IPC SM 840 : E | QUALIFICATION AND PERFORMANCE SPECIFICATION OF PERMANENT SOLDER MASK AND FLEXIBLE COVER MATERIALS |
| IPC 2223 GERMAN : C | SECTIONAL DESIGN STANDARD FOR FLEXIBLE PRINTED BOARDS |
| IPC HDBK 830 : A | GUIDELINES FOR DESIGN, SELECTION AND APPLICATION OF CONFORMAL COATINGS |
| IPC CC 830 : B | QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES |
| IPC J STD 001 HUNGARIAN : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| MIL-PRF-31032-5 Revision B:2017 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC, THERMOSETTING, OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS |
| IPC J STD 004 CHINESE : B | REQUIREMENTS FOR SOLDERING FLUXES |
| IPC J STD 001 GERMAN : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC 9203 : 0 | USERS GUIDE TO IPC-9202 AND THE IPC-B-52 STANDARD TEST VEHICLE |
| IPC A 610 SWEDISH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 003 : C | SOLDERABILITY TESTS FOR PRINTED BOARDS |
| IPC SM 840 CHINESE : E | QUALIFICATION AND PERFORMANCE SPECIFICATION OF PERMANENT SOLDER MASK AND FLEXIBLE COVER MATERIALS |
| IPC A 610 HUNGARIAN : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC HDBK 840 : 0 | SOLDER MASK HANDBOOK |
| IPC 6012 FRENCH : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
| IPC 4204 : A | FLEXIBLE METAL-CLAD DIELECTRICS FOR USE IN FABRICATION OF FLEXIBLE PRINTED CIRCUITRY |
| IPC D 949 : 1987 | RIGID MULTILAYER PRINTED BOARDS, DESIGN STANDARD FOR, |
| IPC A 610 CHINESE : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC 2141 : A | DESIGN GUIDE FOR HIGH-SPEED CONTROLLED IMPEDANCE CIRCUIT BOARDS |
| IPC 4556 : 0 | SPECIFICATION FOR ELECTROLESS NICKEL/ELECTROLESS PALLADIUM/IMMERSION GOLD (ENEPIG) PLATING FOR PRINTED CIRCUIT BOARDS |
| IPC 4202 CHINESE : A | FLEXIBLE BASE DIELECTRICS FOR USE IN FLEXIBLE PRINTED CIRCUITRY |
| IPC 6013 GERMAN : B | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE PRINTED BOARDS |
| IPC J STD 006 CHINESE : B-2 | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| IPC J STD 001 ROMANIAN : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 005 : A | REQUIREMENTS FOR SOLDERING PASTES |
| IPC A 610 JAPANESE : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 VIETNAMESE : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 005 CHINESE : A | REQUIREMENTS FOR SOLDERING PASTES |
| IPC J STD 001 DANISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 600 FRENCH : H | ACCEPTABILITY OF PRINTED BOARDS |
| IPC 4101 CHINESE : C2009 | SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS |
| IPC FC 221 : A1984 | SPECIFICATION FOR FLAT COPPER CONDUCTORS FOR FLAT CABLES |
| IPC A 610 RUSSIAN : D | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 TURKISH : E2010 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC 6018 CHINESE : B | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR HIGH FREQUENCY (MICROWAVE) PRINTED BOARD |
| IPC 4101 GERMAN : C | SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS |
| IPC FC 213 : 1984 | PERFORMANCE SPECIFICATION FOR FLAT UNDERCARPET TELEPHONE CABLE |
| 18/30369151 DC : DRAFT MAY 2018 | BS EN 62899-202-7 - PRINTED ELECTRONICS - PART 202-7: MATERIALS - CONDUCTIVE INK - MEASUREMENT OF PEEL STRENGTH FOR PRINTED CONDUCTIVE LAYER ON FLEXIBLE SUBSTRATE |
| IPC HDBK 4691 : 2015 | HANDBOOK ON ADHESIVE BONDING IN ELECTRONIC ASSEMBLY OPERATIONS |
| SAE AS 6171/10 : 2016 | TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY THERMOGRAVIMETRIC ANALYSIS (TGA) TEST METHODS |
| BS EN 61189-5-1:2016 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Guidance for printed board assemblies |
| IEC 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies |
| 13/30295427 DC : 0 | BS IEC/PAS 61249-8-5 ED.1 - QUALIFICATION AND PERFORMANCE SPECIFICATION OF PERMANENT SOLDER MASK AND FLEXIBLE COVER MATERIALS |
| I.S. EN 61191-4:2017 | PRINTED BOARD ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION - REQUIREMENTS FOR TERMINAL SOLDERED ASSEMBLIES |
| IPC J STD 001 CHINESE : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| I.S. EN 61191-3:2017 | PRINTED BOARD ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION - REQUIREMENTS FOR THROUGH-HOLE MOUNT SOLDERED ASSEMBLIES |
| IPC 2222 : A | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| IPC J STD 001 SPANISH : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 FRENCH : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC 9202 : 0 | MATERIAL AND PROCESS CHARACTERIZATION/QUALIFICATION TEST PROTOCOL FOR ASSESSING ELECTROCHEMICAL PERFORMANCE |
| MIL-S-13949 Revision H:1993 | SHEET, PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR |
| IPC 9631 : 0 | USER GUIDE FOR IPC-TM-650 - METHOD 2.6.27: THERMAL STRESS, CONVECTION REFLOW ASSEMBLY SIMULATION |
| IPC TM 650-MDP : 2012 | IPC TEST METHOD DEVELOPMENT PACKET |
| GEIA HB 0005-2 : 2007 | TECHNICAL GUIDELINES FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER AND FINISHES |
| IEC TR 62866:2014 | Electrochemical migration in printed wiring boards and assemblies - Mechanisms and testing |
| BS EN 61191-4:2017 | Printed board assemblies Sectional specification. Requirements for terminal soldered assemblies |
| BS EN ISO 9455-17:2006 | Soft soldering fluxes. Test methods Surface insulation resistance comb test and electrochemical migration test of flux residues |
| NASA GSFC STD 6001 : 2016 | CERAMIC COLUMN GRID ARRAY DESIGN AND MANUFACTURING RULES FOR FLIGHT HARDWARE |
| NASA MSFC STD 2907 : 2006 | WORKMANSHIP STANDARD FOR PRINTED WIRING BOARDS |
| NASA GSFC STD 8002 : 2015 | STANDARD QUALITY ASSURANCE REQUIREMENTS FOR THE USE OF WATER SOLUBLE FLUX |
| IPC 4562 : A | METAL FOIL FOR PRINTED BOARD APPLICATIONS |
| IPC 4554 : 0 | SPECIFICATION FOR IMMERSION TIN PLATING FOR PRINTED CIRCUIT BOARDS |
| IPC SM 817 : A | GENERAL REQUIREMENTS FOR DIELECTRIC SURFACE MOUNTING ADHESIVES |
| IPC A 630 : 0 | ACCEPTABILITY STANDARD FOR MANUFACTURE, INSPECTION AND TESTING OF ELECTRONIC ENCLOSURES |
| IPC 9707 : 0 | SPHERICAL BEND TEST METHOD FOR CHARACTERIZATION OF BOARD LEVEL INTERCONNECTS |
| SAE AS 6171/9 : 2016 | TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY FOURIER TRANSFORM INFRARED SPECTROSCOPY (FTIR) TEST METHODS |
| MIL-I-46838 Revision B:1981 | INSULATING COMPOUND, ELECTRICAL, SILICONE RUBBER, ROOM TEMPERATURE VULCANIZING |
| IPC J STD 030 : A | SELECTION AND APPLICATION OF BOARD LEVEL UNDERFILL MATERIALS |
| CEI EN 61189-5-503 : 1ED 2017 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARD AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-503: GENERAL TEST METHOD FOR MATERIALS AND ASSEMBLIES - CONDUCTIVE ANODIC FILAMENTS (CAF) TESTING OF CIRCUIT BOARDS |
| IPC AM 372 : 1978 | ELECTROLESS COPPER FILM FOR ADDITIVE PRINTED BOARDS, |
| ASTM D 3380 : 2014 : REDLINE | Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates |
| IPC J STD 020 CHINESE : D-1 | MOISTURE/REFLOW SENSITIVITY CLASSIFICATION FOR NONHERMETIC SURFACE MOUNT DEVICES |
| IEC 61191-1:2013 | Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| IEC PAS 61249-8-5:2014 | Qualification and performance specification of permanent solder mask and flexible cover materials |
| 15/30327712 DC : 0 | BS EN 61191-1 - PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES |
| IEC 61189-5-1:2016 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General test methods for materials and assemblies - Guidance for printed board assemblies |
| PD IEC/TR 62866:2014 | Electrochemical migration in printed wiring boards and assemblies. Mechanisms and testing |
| 11/30255124 DC : 0 | BS EN 61191-1 - PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES |
| IEC TS 62647-22:2013 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 22: Technical guidelines |
| IEC PAS 62647-22:2011 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 22: Technical guidelines |
| ISO 9455-17:2002 | Soft soldering fluxes — Test methods — Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues |
| IEC PAS 62293:2001 | Qualification and performance specification for high density interconnect (HDI) layers or boards (IPC 6016) |
| IEC PAS 62249:2001 | Qualification and performance specification for flexible printed boards |
| PD IEC/PAS 63015:2016 | Definition of “Low-Halogen?? for electronic products |
| IEC 61191-3:2017 | Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies |
| PD IEC/PAS 61249-8-5:2014 | Qualification and performance specification of permanent solder mask and flexible cover materials |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| EN ISO 9455-17:2006 | Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues (ISO 9455-17:2002) |
| MIL-I-47199 Revision A:1980 | INSULATING COMPOUND, ELECTRICAL, LOW VISCOSITY, SILICONE RUBBER |
| BS ISO 9455-17 : 2002 AMD 16425 | SOFT SOLDERING FLUXES - TEST METHODS - PART 17: SURFACE INSULATION RESISTANCE COMB TEST AND ELECTROCHEMICAL MIGRATION TEST OF FLUX RESIDUES |
| NASA STD 8739.1 : 2016 | WORKMANSHIP STANDARD FOR POLYMERIC APPLICATION ON ELECTRONIC ASSEMBLIES |
| IPC 9204 : 2017 | GUIDELINE ON FLEXIBILITY AND STRETCHABILITY TESTING FOR PRINTED ELECTRONICS |
| IPC 6801 : 0 | IPC/JPCA TERMS & DEFINITIONS, TEST METHODS, AND DESIGN EXAMPLES FOR BUILD-UP/HIGH DENSITY INTERCONNECT (HDI) PRINTED WIRING BOARDS |
| IPC 4562 CHINESE : A | METAL FOIL FOR PRINTED BOARD APPLICATIONS |
| I.S. EN 61189-5-503:2017 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARD AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-503: GENERAL TEST METHOD FOR MATERIALS AND ASSEMBLIES - CONDUCTIVE ANODIC FILAMENTS (CAF) TESTING OF CIRCUIT BOARDS |
| EN 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies |
| IEC PAS 61249-8-1:2014 | Qualification and performance of electrical insulating compound for printed wiring assemblies |
| 13/30295424 DC : 0 | BS IEC/PAS 61249-8-1 ED.1 - QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES |
| PD IEC/TS 62647-22:2013 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Technical guidelines |
| EN 61191-3:2017 | Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies |
| IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013) |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| IPC 2221 FRENCH : B2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| EN 61191-4:2017 | Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies |
| IPC FC 218 : 1976(R1991) | GENERAL SPECIFICATION FOR CONNECTORS, ELECTRICAL FLAT CABLE TYPE |
| IPC FC 231 : C1992 AMD 1 1995 | FLEXIBLE BARE DIELECTRICS FOR USE IN FLEXIBLE PRINTED WIRING |
| I.S. EN ISO 9455-17:2006 | SOFT SOLDERING FLUXES - TEST METHODS - PART 17: SURFACE INSULATION RESISTANCE COMB TEST AND ELECTROCHEMICAL MIGRATION TEST OF FLUX RESIDUES |
| IPC 1601 CHINESE : 2016 | PRINTED BOARD HANDLING AND STORAGE GUIDELINES |
| IPC 6013 CHINESE : B | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE PRINTED BOARDS |
| ONORM EN ISO 9455-17 : 2006 | SOFT SOLDERING FLUXES - TEST METHODS - PART 17: SURFACE INSULATION RESISTANCE COMB TEST AND ELECTROCHEMICAL MIGRATION TEST OF FLUX RESIDUES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.