I.S. EN 61191-1:2013
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013 (EQV))
Available format(s)
Hardcopy , PDF
Withdrawn date
19-10-2021
Language(s)
English
Published date
01-01-2013
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Materials requirements
6 Components and printed board requirements
7 Assembly process requirements
8 Assembly soldering requirements
9 Cleanliness requirements
10 Assembly requirements
11 Coating and encapsulation
12 Rework and repair
13 Product quality assurance
14 Other requirements
15 Ordering data
Annex A (normative) - Requirements for soldering
tools and equipment
Annex B (normative) - Qualification of fluxes
Annex C (normative) - Quality assessment
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Gives requirements for materials, methods and verification criteria for producing quality soldered interconnections and assemblies using surface mount and related assembly technologies.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
53
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| BS EN 61191-1:2013 | Identical |
| SN EN 61191-1 : 1998 | Identical |
| DIN EN 61191-1:2015-10 (Draft) | Identical |
| NF EN 61191-1 : 2014 | Identical |
| EN 61191-1:2013 | Identical |
| NBN EN 61191-1 : 2013 | Identical |
| IEC 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| IEC 61193-1:2001 | Quality assessment systems - Part 1: Registration and analysis of defects on printed board assemblies |
| IEC 61188-5-3:2007 | Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides |
| IEC 61188-5-2:2003 | Printed boards and printed board assemblies - Design and use - Part 5-2: Attachment (land/joint) considerations - Discrete components |
| EN 60721-3-1:1997 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 1: Storage |
| IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| EN 61340-5-1:2016/AC:2017-05 | ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS (IEC 61340-5-1:2016/COR1:2017) |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| IEC PAS 62326-7-1:2007 | Performance guide for single- and double-sided flexible printed wiring boards |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IEC 61190-1-2:2014 | Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly |
| EN 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| IEC 61340-5-1:2016 | Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements |
| IEC 61188-1-1:1997 | Printed boards and printed board assemblies - Design and use - Part 1-1: Generic requirements - Flatness considerations for electronic assemblies |
| IEC TR 61340-5-2:2007 | Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide |
| EN 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies |
| IEC 62326-1:2002 | Printed boards - Part 1: Generic specification |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| IPC TM 650 : 0 | TEST METHODS MANUAL |
| IEC 61189-1:1997+AMD1:2001 CSV | Test methods for electrical materials, interconnection structures and assemblies - Part 1: General test methods and methodology |
| IPC PC 1990 : 1990 | GENERAL REQUIREMENTS FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL |
| IEC 62326-4:1996 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification |
| IPC A 610 : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
| IPC J STD 005 : A | REQUIREMENTS FOR SOLDERING PASTES |
| IPC J STD 002 : D | SOLDERABILITY TESTS FOR COMPONENT LEADS, TERMINATIONS, LUGS, TERMINALS AND WIRES |
| IEC 61760-2:2007 | Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide |
| EN 61191-3:2017 | Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies |
| IEC 61188-7:2017 | Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD library construction |
| IEC 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| IEC 61189-3:2007 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
| IEC 61188-5-6:2003 | Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations - Chip carriers with J-leads on four sides |
| IEC 61188-5-1:2002 | Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements |
| CLC/TR 61340-5-2:2008 | Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide |
| IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
| EN 61249-8-8:1997 | Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 8: Temporary polymer coatings |
| IEC 61188-5-5:2007 | Printed boards and printed board assemblies - Design and use - Part 5-5: Attachment (land/joint) considerations - Components with gull-wing leads on four sides |
| ISO 9001:2015 | Quality management systems — Requirements |
| IEC 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies |
| IEC 61191-4:2017 | Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies |
| IEC 62326-4-1:1996 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification - Section 1: Capability detail specification - Performance levels A, B and C |
| EN 61760-2:2007 | Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide |
| EN 61189-1 : 97 AMD 1 2001 | TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 1: GENERAL TEST METHODS AND METHODOLOGY |
| IPC OI 645 : 0 | STANDARD FOR VISUAL OPTICAL INSPECTION AIDS |
| EN 61190-1-3:2007/A1:2010 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDER FOR ELECTRONIC SOLDERING APPLICATIONS |
| IEC 61188-5-4:2007 | Printed boards and printed board assemblies - Design and use - Part 5-4: Attachment (land/joint) considerations - Components with J leads on two sides |
| IPC J STD 003 : C | SOLDERABILITY TESTS FOR PRINTED BOARDS |
| IEC 61249-8-8:1997 | Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 8: Temporary polymer coatings |
| IPC SM 817 : A | GENERAL REQUIREMENTS FOR DIELECTRIC SURFACE MOUNTING ADHESIVES |
| EN 61190-1-2:2014 | Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly |
| IEC 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| EN 61188-1-1:1997 | Printed boards and printed board assemblies - Design and use - Part 1-1: Generic requirements - Flatness considerations for electronic assemblies |
| EN 60194:2006 | Printed board design, manufacture and assembly - Terms and definitions |
| IEC 60721-3-1:1997 | Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities - Section 1: Storage |
| IEC 61190-1-3:2007+AMD1:2010 CSV | Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications |
| EN 61191-4:2017 | Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies |
| IEC 61191-3:2017 | Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.