VDI 4631:2011-02
Current
Current
The latest, up-to-date edition.
Quality criteria for biogas plants
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
02-01-2011
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Preliminary note
Introduction
1 Scope
2 Terms and definitions
3 The 'biogas plant' system
4 Plant construction and
commissioning procedure
5 Definition of evaluation parameters
6 Balancing the 'biogas plant' system
7 Characterization of parameters
for planning
8 Characterization of parameters
for operation
9 Target/actual comparison
Annex A - Transferability of analytic
evaluation parameters for
substrates and fermentation
residues between agrochemical
and biotechnological standards
Annex B - Monitoring fermentation efficiency
Annex C - Checklists
Annex D - Checklist for parameters for
comparison of target/actual
states
Bibliography
Provides methods by which biogas plants can be comparatively evaluated with regard to technical, ecological and economic criteria not only in planning but also in operation.
| DocumentType |
Standard
|
| Pages |
153
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| VDI 6310 Blatt 1:2016-01 | Classification and quality criteria of biorefineries |
| VDI 3925 Blatt 1:2016-09 | Methods for evaluation of waste treatment processes |
| VDI 3459 Blatt 4:2016-09 (Draft) | Terminology of waste treatment and energy management - Biological treatment |
| DVGW G 600 : 2008 SUPP 2014 | TECHNICAL SPECIFICATIONS FOR GAS INSTALLATIONS (DVGW-TRGI) |
| DVGW G 260 : 2013 | GAS QUALITY |
| BGV C 5 : 1997 | |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| DIN 2403:2014-06 | IDENTIFICATION OF PIPELINES ACCORDING TO THE FLUID CONVEYED |
| DVGW G 472 : 2000 | GAS PIPELINES OF HDPE WITH AN OPERATING PRESSURE UP TO 4 BAR AND OF PVC WITH AN OPERATING PRESSURE UP TO 1 BAR; CONSTRUCTION |
| DVGW G 462-1 : 1976 | INSTALLATION OF GAS LINES WITH A WORKING OVERPRESSURE OF STEEL PIPES OF UP TO 4 BAR |
| ISO 5663:1984 | Water quality — Determination of Kjeldahl nitrogen — Method after mineralization with selenium |
| VDI 4608 Blatt 1:2005-03 | Energy systems - Combined heat and power - Terms, definitions, examples |
| EN 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| DIN EN 12880:2001-02 | Characterization of sludges - Determination of dry residue and water content; German version EN 12880:2000 |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| ZH 1/201 : 1996 | RULES FOR THE EQUIPMENT OF WORK PLACES WITH FIRE EXTINGUISHERS |
| DVGW G 495 : 2015 | |
| VDI 4630:2016-11 | Fermentation of organic materials - Characterization of the substrate, sampling, collection of material data, fermentation tests |
| EN 25663:1993 | Water quality - Determination of Kjeldahl nitrogen - Method after mineralization with selenium (ISO 5663:1984) |
| DIN 6280-14:1997-08 | GENERATING SETS - RECIPROCATING INTERNAL COMBUSTION ENGINES DRIVEN GENERATING SETS - PART 14: COMBINED HEAT AND POWER SYSTEM (CHPS) WITH RECIPROCATING INTERNAL COMBUSTION ENGINES; BASICS, REQUIREMENTS, COMPONENTS AND APPLICATION |
| DVGW G 469 : 2010 | PRESSURE TESTING METHODS FOR GAS TRANSMISSION/GAS DISTRIBUTION |
| EN 12880:2000 | Characterization of sludges - Determination of dry residue and water content |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| DIN EN 60079-10-1 : 2016-10 | EXPLOSIVE ATMOSPHERES - PART 10-1: CLASSIFICATION OF AREAS - EXPLOSIVE GAS ATMOSPHERES (IEC 60079-10-1:2015 + COR1:2015) |
| DIN 1343:1990-01 | REFERENCE CONDITIONS, NORMAL CONDITIONS, NORMAL VOLUME - CONCEPTS AND VALUES |
| DIN EN 60079-10 : 2004 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 10: CLASSIFICATION OF HAZARDOUS AREAS |
| VDI 4600:2012-01 | Cumulative energy demand (KEA) - Terms, definitions, methods of calculation |
| DIN EN 60079-0 : 2014 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED + COR.:2012 + COR.:2013) |
| EN 12879:2000 | Characterization of sludges - Determination of the loss on ignition of dry mass |
| DIN 4102-1:1998-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 1: BUILDING MATERIALS; CONCEPTS, REQUIREMENTS AND TESTS |
| VDI/VDE 2180 Blatt 1:1998-12 | Safeguarding of industrial process plants by means of process control engineering - Introduction, terms, comments |
| DIN VDE 0100 : 1973 | ERECTION OF POWER INSTALLATIONS WITH RATED VOLTAGES BELOW 1000 V |
| VDI 3475 Blatt 1:2003-01 | Emission control - Biological waste treatment facilities - Composting and anaerobic digestion; Plant capacities more than approx. 6000 Mg/a |
| BGR 133 : 2004 | RULES FOR THE EQUIPMENT OF WORK PLACES WITH FIRE EXTINGUISHERS |
| DVGW G 462 : DRAFT 2012 | GASLEITUNGEN AUS STAHLROHREN BIS 16 BAR BETRIEBSDRUCK - ERRICHTUNG |
| BGR 145 : 2001 | UMGANG MIT BIOLOGISCHEN ARBEITSSTOFFEN IN ABWASSERTECHNISCHEN ANLAGEN |
| DIN EN 15632-1:2015-03 | District heating pipes - Pre-insulated flexible pipe systems - Part 1: Classification, general requirements and test methods (includes Amendment A1:2014) |
| DIN EN 12879:2001-02 | CHARACTERIZATION OF SLUDGES - DETERMINATION OF THE LOSS ON IGNITION OF DRY MASS |
| DIN EN 253:2015-12 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| VDI 4608 Blatt 2:2008-07 | Energy systems - Combined heat and power - Allocation and evaluation |
| DVGW G 262 : 2011 | UTILISATION DES GAZ PROVENANT DES DECHARGES PUBLIQUES, DES STATIONS D'EPURATION ET DE LA DECOMPOSITION ORGANIQUE |
| DIN EN ISO 10628:2001-03 | FLOW DIAGRAMS FOR PROCESS PLANTS - GENERAL RULES |
| BGR 126 : 2008 | |
| VDI/VDE 2180 Blatt 4:1998-12 | Safeguarding of industrial process plants by means of process control engineering - Calculating methods for reliability characteristics of safety instrumented systems |
| BGR 104 : 2014 | |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| VDI 3475 Blatt 4:2010-08 | Emission control - Agricultural biogas facilities - Digestion of energy crops and manure |
| DIN EN 25663:1993-11 | WATER QUALITY; DETERMINATION OF KJELDAHL NITROGEN; METHOD AFTER MINERALIZATION WITH SELENIUM |
| ISO 10628:1997 | Flow diagrams for process plants General rules |
| VDI/VDE 2180 Blatt 3:1998-12 | Safeguarding of industrial process plants by means of process and control engineering - Building and installation requirements for functional safety of process control systems under emergency conditions |
| EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
| VDI/VDE 2180 Blatt 2:1998-12 | Safeguarding of industrial process plants by means of process control engineering - Classification of process control systems - Realisation, operation and testing of safety instrumented systems |
| BGR 132 : 2004 | VERMEIDUNG VON ZUENDGEFAHREN INFOLGE ELEKTROSTATISCHER AUFLADUNGEN |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| EN ISO 10628:2000 | Flow diagrams for process plants - General rules (ISO 10628:2000) |
| DVGW G 462-2 : 1985 | GAS LINES OF STEEL PIPES OF A WORKING PRESSURE FROM MORE THAN 4 BAR TO 16 BAR - INSTALLATION |
| EN 60079-10:2003 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| VBG 54 : 1997 | |
| VDE 0170-1 : 2014 | EXPLOSIONSGEFAEHRDETE BEREICHE - TEIL 0: BETRIEBSMITTEL - ALLGEMEINE ANFORDERUNGEN (IEC 60079-0:2011, MODIFIZIERT +COR.:2012+COR.:2013) |
| VDI 3475 Blatt 2:2005-12 | Emission control - Facilities for biological waste - Composting an anaerobic (co-)digestion - Plant capacities up to approx. 6000 Mg/a |
| VDI 3985:2004-03 | Principles for the design, construction and acceptance of combined heat and power plants with internal combustion engines |
| BGR 117-1 : 2008 | BEHAELTER, SILOS UND ENGE RAEUME - TEIL 1: ARBEITEN IN BEHAELTERN, SILOS UND ENGEN RAEUMEN |
| DIN EN 334:2016-05 (Draft) | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| VDE 0100 : 1973 | REGULATIONS FOR THE SETTING-UP OF POWER PLANTS WITH RATED VOLTAGES UP TO 1000 V |
| BGV D 2 : 1997 | |
| DIN 38406-1:1983-05 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; CATIONS (GROUP E); DETERMINATION OF IRON (E 1) |
| VBG 50 : 1997 | |
| VDI 3475-3 : 2006 COR 2007 | Emission control - Mechnical-biological treatment facilities for municipal solid waste - Corrigendum concerning guideline VDI 3475 Part 3:2006-12 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.