VDE 0636-41 : 1983
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LOW-VOLTAGE FUSES - PART 41: D0-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 380 V A.C. 250 V D.C.
01-01-1998
01-12-2013
1 Anwendungsbereich
2 Begriffe
2.1 Schraubkappe
2.2 Passeinsatz
3 Betriebsbedingungen
4 Klassifikation
5 Charakteristische Merkmale
5.1 Spannungen
5.2 Ströme
5.3 Kennlinien
5.4 Selektivität
5.5 Kennlinienbeständigkeit
5.6 Erwärmung und Verlustleistung
5.7 Ausschaltvermögen
6 Anforderungen
6.1 Allgemeines
6.2 Unverwechselbarkeit
6.3 Berührungsschutz
6.4 Kriech- und Luftstrecken, Abstände
6.5 Leiteranschlüsse
6.6 Sicherungssockel, Schraubkappen und Passeinsätze
6.7 Sicherungseinsätze
6.8 Kontaktstücke
6.9 Werkstoffe
6.10 Isolierteile
6.11 Kennzeichnung
7 Prüfungen
7.1 Allgemeines
7.2 Masse, Unverwechselbarkeit, Kennzeichnung,
Kriech- und Luftstrecken, Abstände
7.3 Berührungsschutz
7.4 Spannungsfestigkeit und Isolationswiderstand
7.5 Verlustleistung
7.6 Zeit/Strom-Verhalten
7.7 Kennlinienbeständigkeit
7.8 Wärmefestigkeit und Feuersicherheit
7.9 Widerstandsfähigkeit gegen Korrosion (Rost)
7.10 Mechanische Festigkeit, Montierbarkeit, Aufbau
7.11 Ausschaltvermögen und Schaltspannung
7.12 Selektivität
7.13 Funktion des Anzeigers
7.14 Widerstandsfähigkeit gegen Spannungsrisskorrosion
Bilder
Zitierte Normen und andere Unterlagen
Erläuterungen
Diese Norm wird im Rahmen von DIN 57636 Teil 1/VDE 0636 Teil 1 für D0-Sicherungen bis 100 A und ~ 380 V = 250 V für Kabel- und Leitungsschutz angewendet.
| DocumentType |
Standard
|
| PublisherName |
Verband Deutscher Elektrotechniker
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN VDE 0636-41 : 1983 | Identical |
| DIN 57636-41 : 1983 | Identical |
| DIN 57636-41 : 1983 | Corresponds |
| VDE 0638:1981 | LOW-VOLTAGE SWITCH-GEARS; FUSE-SWITCH-UNITS; D0-SYSTEM |
| DIN VDE 0638 : 1981 | LOW-VOLTAGE SWITCH-GEARS; FUSE-SWITCH-UNITS; D0-SYSTEM |
| DIN 57636-22 : 1984 | LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES; H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT |
| DIN 57636-21 : 1984 | LOW-VOLTAGE FUSES - PART 21: H.R.C. FUSES; PROTECTION OF CABLES AND CORDS UP TO 1250 A AND 500 V A.C., 440 V D.C. AND 660 V A.C. |
| DIN 57638:1981-09 | LOW-VOLTAGE SWITCH-GEARS; FUSE-SWITCH-UNITS; D0-SYSTEM |
| DIN 57636-31 : 1983 | LOW VOLTAGE FUSES - PART 31: D-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 500 V AND/OR UP TO 63 A 660 V A.C. 600 V D.C. |
| DIN 57636-1 : 1983 | LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS |
| DIN VDE 0636-1 : 1983 | LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS |
| DIN 40401-1:1981-12 | GAUGES FOR EDISON THREAD FOR D-TYPE FUSES 'GO' RING GAUGES |
| DIN 40100-3:1985-07 | GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT IN THE ELECTROTECHNICAL FIELD; CURRENT, VOLTAGE, FREQUENCY, CONDUCTORS, METHODS OF EARTHING |
| DIN 49524:1980-06 | D-TYPE FUSE-BASE FOR FRONT CONNECTION D 01, D 02, D 03, 380 V |
| DIN 46282:1973-11 | CLAMPING SADDLE FOR CONDUCTORS |
| DIN 40401-2:1981-12 | 'GO' AND 'NOT GO' PLUG GAUGES FOR D TYPE FUSES; GAUGES FOR EDISON THREAD |
| DIN 2250-1:2008-10 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GO RING GAUGES AND SETTING RING GAUGES - PART 1: FROM 1 MM UP TO 315 MM NOMINAL DIAMETER |
| DIN 49525-2:1979-03 | D-TYPE, FUSE-CARRIERS D 01, D 02, D 03, 380 V; GAUGES |
| DIN 49525-1:1980-03 | D-TYPE FUSE CARRIERS D 01, D 02, D 03, 380 V |
| DIN 57636-31 : 1983 | LOW VOLTAGE FUSES - PART 31: D-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 500 V AND/OR UP TO 63 A 660 V A.C. 600 V D.C. |
| DIN 57470-1 : 1984 | TESTING EQUIPMENT AND TESTING METHODS; TESTING OF PROTECTION AGAINST CONTACT; IEC TESTING FINGER |
| DIN EN 50022:1978-05 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE - MOUNTING RAILS, TOP HAT RAILS, 35 MM WIDE, FOR SNAP ON MOUNTING OF EQUIPMENT |
| DIN 57636-23 : 1984 | NIEDERSPANNUNGSSICHERUNGEN; NH-SYSTEM, HALBLEITERSCHUTZSICHERUNGEN BIS 1600 A UND BIS 3000 V |
| DIN 40010:1990-08 | ELECTRICAL ENGINEERING; VDE TEST MARKS; MARKING ON ELECTRICAL EQUIPMENT |
| DIN 46223:1973-02 | ROUND-TERMINALS |
| DIN 57609-1 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; GENERAL REQUIREMENTS |
| DIN 49300:1979-03 | D-TYPE FUSES; SYNOPSIS |
| DIN 50018:2013-05 | Testing in a saturated atmosphere in the presence of sulfur dioxide |
| DIN 49523:1981-06 | GAUGE-PIECES D 01, D 02, D 03 AND FUNCTIONAL MEASURES FOR GAUGE-PIECE HAND KEYS |
| DIN 41000:1975-02 | FLAT TERMINALS - ASSEMBLY, TERMINAL BODY |
| DIN 57471-2 : 1975 | VDE SPECIFICATIONS FOR FIRE RISK TESTING OF ELECTROTECHNICAL PRODUCTS, THEIR SUBASSEMBLIES AND COMPONENTS - GLOW-WIRE TEST |
| DIN 46288:1974-08 | CONNECTING WASHERS FOR CONDUCTORS |
| DIN 57636-1 : 1983 | LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS |
| DIN 49522:1981-04 | D-TYPE FUSE-LINKS - D 01, D 02, D 03, 380 V, 250 V- |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.