VDE 0557-3 : 2001 COR 1 2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: PRODUCT EMC STANDARD
11-17-2022
01-12-2013
1 Anwendungsbereich und Zweck
2 Normative Verweisungen
3 Begriffe und Definitionen
4 Anwendung der Prüfungen bei Stromversorgungen
unterschiedlicher Technologie
5 Allgemeine Anforderungen und Prüfbedingungen
5.1 Allgemeine Anforderungen
5.2 Prüfbedingungen
6 Anforderungen an die Störaussendung
6.1 Grenzwerte in definierten Umgebungen
6.2 Niederfrequenzerscheinungen (f <= 9 kHz; nur
Wechselspannungseingang)
6.3 Leitungsgebundene Hochfrequenzstörungen
6.4 Hochfrequenzstörstrahlung
7 Anforderungen an die Störfestigkeit
7.1 Funktionskriterien
7.2 Grundanforderungen an die Störfestigkeit,
Hochfrequenzstörungen
8 Anordnungen und Kombinationen von Stromversorgungen
8.1 Modulare Stromversorgungen
8.2 Stromversorgungssysteme
8.3 Stromversorgungsanlagen
8.4 Dezentrale Stromversorgungen
8.5 Parallel- oder in Reihe geschaltete
Stromversorgungen
9 Typenfamilien von Stromversorgungen
10 Statistische Faktoren
11 Sicherheitsfaktoren
12 Prüfbericht
Anhang A (normativ) Anleitung für die Unterteilung
von Stromversorgungen
Anhang B (informativ) Kommutierungseinbrüche
Anhang C (informativ) Berechnung und Simulation der
Oberwellen des Eingangsstromes
Anhang D (informativ) Besondere Betrachtungen für
Gleichspannungseingänge
Anhang E (informativ) Die kritische Frequenz bei der
Messung der Hochfrequenzleistung
Anhang F (normativ) Leitlinien für Typenfamilien von
Stromversorgungen
Anhang G (informativ) Zusammenfassung der
Klassifikation der Umgebungen und Grenzwerte
Anhang H (informativ) Grenzwerte für die
Störaussendung
Anhang I (informativ) Erläuterungen zur Anwendung
des Kriteriums B für dauernde
Störungserscheinungen (siehe 7.1)
Anhang ZA (normativ) Normative Verweisungen auf
Internationale Publikationen mit ihren
entsprechenden Europäischen Publikationen
Dieser Teil der IEC 61204 beschreibt die Anforderungen an die elektromagnetische Verträglichkeit (EMV) von Stromversorgungseinheiten (power supply units, PSUs) mit Ausgangsgleichspannung bis 200 V, bis zu einer Ausgangsleistung von 30 kW und zum Anschluss an bis 600 V Gleich- oder Wechselspannung. Die Geräte sind für selbständigen Betrieb oder zum Einsatz in Geräten mit entsprechendem elektrischem und mechanischem Schutz vorgesehen. Für spezielle industrielle PSUs, z. B. in der chemischen und metallurgischen Industrie, können andere EMV-Produktnormen existieren. In diesem Fall können diese Normen als eine Alternative angewendet werden. Da viele PSUs als Bestandteil grösserer Einheiten verwendet werden, für die andere EMV-Normen gelten, wird anschliessend in den Abschnitten a) und b) eine Einteilung der Stromversorgungen vorgenommen und die anzuwendenden EMV-Normen werden angegeben. In Anhang A werden weitere Richtlinien für die Einteilung angegeben. a) Stromversorgungen für selbständigen Betrieb (einzelne Geräte) Dieser Teil der IEC 61204 gilt für PSUs, die als Einheit mit selbständiger Funktion entwickelt und als eigenständige Einheit auf den Markt gebracht werden. b) Stromversorgungskomponenten.
DevelopmentNote |
DRAFT 2015 issued in November 2015. (12/2015)
|
DocumentType |
Standard
|
PublisherName |
Verband Deutscher Elektrotechniker
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
DIN EN 61204-3 : 2001 COR 1 2004 | Corresponds |
IEC 61204-3:2016 | Identical |
EN 61204-3:2000 | Identical |
CISPR 14-1:2016 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
IEC 60050-131:2002 | International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory |
DIN EN 61000-4-11 : 2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS |
EN 60146-1-1:2010 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
DIN VDE 0110-1 : 1997 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
EN 61204:1995/A1:2001 | LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS (IEC 61204:1993, MODIFIED + A1:2001) |
EN 61000-4-11:2004/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017) |
IEC 61204:1993+AMD1:2001 CSV | Low-voltage power supply devices, d.c. output - Performance characteristics |
IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
EN 61000-3-3:2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013) |
VDE 0847-4-6 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
HD 625.1 : 200S1 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PRINCIPLES, REQUIREMENTS AND TESTS |
VDE 0557-1 : 2001 | LOW-VOLTAGE POWER SUPPLY DEVICES, DC OUTPUT - PERFORMANCE CHARACTERISTICS AND SAFETY REQUIREMENTS |
VDE 0847-4-5 : 2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-5: TESTING AND MEASUREMENT TECHNIQUES - SURGE IMMUNITY TEST (IEC 61000-4-5:2014) |
DIN 40200:1981-10 | NOMINAL VALUE, LIMITING VALUE, RATED VALUE, RATING - CONCEPTS |
IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
DIN EN 61000-4-5 : 2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-5: TESTING AND MEASUREMENT TECHNIQUES - SURGE IMMUNITY TEST (IEC 61000-4-5:2014) |
VDE 0847-4-2 : 2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
VDE 0838-3 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013) |
EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
VDE 0558-11 : 2011 | SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
VDE 0847-4-11 : 2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS |
DIN EN 61000-4-4 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
ISO/IEC Guide 25:1990 | General requirements for the competence of calibration and testing laboratories |
IEC 60050-551:1998 | International Electrotechnical Vocabulary (IEV) - Part 551: Power electronics |
VDE 0838-2 : 2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) (IEC 61000-3-2:2014) |
IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
VDE 0847-4-4 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
DIN EN 61000-3-2 : 2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) (IEC 61000-3-2:2014) |
DIN EN 61204 : 2001 | LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS |
VDE 0878-22 : 2011 COR 1 2016 | EINRICHTUNGEN DER INFORMATIONSTECHNIK - FUNKSTOEREIGENSCHAFTEN - GRENZWERTE UND MESSVERFAHREN (CISPR 22:2008) |
DIN EN 61000-4-6 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
IEC 60146-1-1:2009 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
EN 55022:2010/AC:2011 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
DIN EN 61000-3-3 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013) |
IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
DIN EN 61000-4-3 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
DIN EN 55022 : 2011 COR 1 2016 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008, MODIFIED) |
DIN IEC 60050-151:1983-12 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY - CHAPTER 151: ELECTRICAL AND MAGNETIC DEVICES |
IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
EN 61000-3-2:2014 | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
IEC 60050-121:1998 | International Electrotechnical Vocabulary (IEV) - Part 121: Electromagnetism |
DIN IEC 60050-131:1983-01 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY - CHAPTER 131: ELECTRIC AND MAGNETIC CIRCUITS |
EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
DIN EN 61000-4-2 : 2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
VDE 0847-4-3 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
CISPR 16-1:1999+AMD1:2002 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus |
DIN EN 55011 : 2011 | INDUSTRIAL, SCIENTIFIC AND MEDICAL EQUIPMENT - RADIO-FREQUENCY DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 11:2015, MODIFIED + A1:2017) |
EN 55014-1:2017 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
DIN EN 60146-1-1 : 2011 | SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.