UNI EN 520 : 2009
Current
The latest, up-to-date edition.
GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
10-28-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Evaluation of conformity
7 Designation of plasterboards
8 Marking, labelling and packaging
Annex A (informative) - Sampling procedure for testing
Annex B (normative) - Conditions for reaction to fire
classification of gypsum plasterboards without
further testing
Annex C (normative) - Mounting and fixing in the test
according to EN 13823 (SBI test)
Annex ZA (informative) - Clauses of this European Standard
addressing provisions of EU Construction Products
Directive
Bibliography
Describes the characteristics and performance of gypsum plasterboards intended to be used in building construction works including those intended for secondary manufacturing operations.
| DevelopmentNote |
Italian version issued in APRIL 2013. (07/2013)
|
| DocumentType |
Test Method
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 520 : 2004 + A1 2009 | Identical |
| NS EN 520 : 2004 + A1 2009 | Identical |
| DIN EN 520:2009-12 | Identical |
| EN 520:2004+A1:2009 | Identical |
| BS EN 520 : 2004 | Identical |
| NF EN 520 : 2005 + A1 2009 | Identical |
| NEN EN 520 : 2004 + A1 2009 | Identical |
| I.S. EN 520:2005 | Identical |
| NBN EN 520 : 2005 + A1 2009 | Identical |
| UNE-EN 520:2005 | Identical |
| UNI 11555 : 2014 | NON-REGULATED PROFESSIONS - INSTALLERS OF PLASTERBOARDS SYSTEMS - KNOWLEDGE, SKILL AND COMPETENCE REQUIREMENTS |
| UNI 11521 : 2014 | STONE WALL AND CEILING COVERINGS - INSTRUCTION FOR THE DESIGN, INSTALLATION AND MAINTENANCE |
| UNI 11493 : 2013 | FLOOR AND WALL CERAMIC TILINGS - INSTRUCTION FOR THE DESIGN, INSTALLATION AND MAINTENANCE OF CERAMIC TILINGS |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
| EN 20535:1994 | Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:1991) |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 12114:2000 | Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 12524 : 2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
| EN 14566:2008+A1:2009 | Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN 336:2013 | Structural timber - Sizes, permitted deviations |
| EN ISO 536:2012 | Paper and board - Determination of grammage (ISO 536:2012) |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| ISO 536:2012 | Paper and board Determination of grammage |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 338:2016 | Structural timber - Strength classes |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| ISO 7892:1988 | Vertical building elements — Impact resistance tests — Impact bodies and general test procedures |
| ISO 535:2014 | Paper and board — Determination of water absorptiveness — Cobb method |
| EN 13963:2014 | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| EN 14195:2014 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.