UNI EN 15342 : 2008
Current
Current
The latest, up-to-date edition.
PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
Published date
09-04-2008
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Characterisation of PS recyclates
5 Quality assurance
Annex A (normative) - Test Method for the
determination of bulk density
Bibliography
Describes a method of specifying delivery condition characteristics for polystyrene (PS) recyclates.
| Committee |
SC 25
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Standards | Relationship |
| EN 15342:2007 | Identical |
| UNI 10667-10 : 2011 | PLASTIC RAW-SECONDARY MATERIALS - POLYSTYRENE FOR GENERAL PURPOSES, FROM THE RECYCLING OF INDUSTRIAL RESIDUES AND/OR FROM PRE AND/OR POST-CONSUMER MATERIALS - PART 10: REQUIREMENTS AND TEST METHODS |
| ISO 1622-1:2012 | Plastics Polystyrene (PS) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| EN ISO 2897-1:1999 | Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997) |
| EN ISO 1043-3:1999 | Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:1996) |
| ISO 3451-1:2008 | Plastics Determination of ash Part 1: General methods |
| CEN/TR 15353:2007 | Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics |
| EN 15343:2007 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
| EN ISO 1043-2:2011 | Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011) |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| EN ISO 3451-1:2008 | Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008) |
| ISO 11469:2016 | Plastics — Generic identification and marking of plastics products |
| EN ISO 11469:2016 | Plastics - Generic identification and marking of plastics products (ISO 11469:2016) |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| ISO 2897-1:1997 | Plastics Impact-resistant polystyrene (PS-I) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ASTM D 5676 : 1999 | Standard Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004) |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 1043-3:2016 | Plastics Symbols and abbreviated terms Part 3: Plasticizers |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| EN ISO 1622-1:2012 | Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:2012) |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| EN ISO 1133:2005 | Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005) |
| ISO 1043-2:2011 | Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials |
| ISO 178:2010 | Plastics Determination of flexural properties |
| EN ISO 306:2013 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
| ISO 1043-4:1998 | Plastics Symbols and abbreviated terms Part 4: Flame retardants |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
| EN 12099:1997 | Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| ASTM D 5577 : 1994 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.