UNI 10372 : 2013
Current
Current
The latest, up-to-date edition.
DISCONTINUOUSLY LAID ROOF COVERINGS - CRITERIA FOR DESIGN, EXECUTION AND MAINTENANCE OF ROOFING MADE OF METAL SHEETS
Published date
06-26-2013
Sorry this product is not available in your region.
1 SCOPO E CAMPO DI APPLICAZIONE
2 RIFERIMENTI NORMATIVI
3 TERMINI E DEFINIZIONI
4 REQUISITI
5 ASPETTI PROGETTUALI
6 COMPOSIZIONE DEL SISTEMA
7 DOCUMENTAZIONE DI PROGETTO
8 MATERIALI E COMPONENTI
9 ISTRUZIONI PER L'ESECUZIONE
10 CONTROLLI DELL' ESECUZIONE
11 ISTRUZIONI PER LA GESTIONE E LA MANUTENZIONE
DELLA COPERTURA
BIBLIOGRAFIA
The standard defines, for the construction solutions that the many years of experience has now consolidated, the criteria for the design, execution and maintenance of the roofs, in which the sealing element consists of metal elements in slabs.
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Supersedes |
| UNI 11418-2 : 2011 | DISCONTINUOUS ROOFING - REQUIREMENTS FOR ROOFER QUALIFICATION - PART 2: GUIDES AND INSTRUCTIONS FOR THE INSTALLATION |
| UNI 9460 : 2008 | DISCONTINUOUSLY LAID ROOF COVERINGS - CRITERIA FOR DESIGN, EXECUTION AND MAINTENANCE OF ROOFING MADE EITHER OF CLAY OR CONCRETE ROOFING TILES |
| UNI 11564 : 2014 | DISCONTINUOUS ROOF - WATERPROOFING BITUMINOUS UNDERLAYS - DEFINITION, FIELD OF APPLICATION AND INSTALLATION |
| UNI EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 10346 : 2009 | CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10025-6 : 2009 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| CEI EN 62305-1 : 2013 | PROTECTION AGAINST LIGHTNING - PART 1: GENERAL PRINCIPLES |
| UNI EN 10025-3 : 2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| UNI 9308-1 : 1988 | DISCONTINUOUS ROOFING - DESIGN CRITERIA - WATER-PROOFING ELEMENT |
| UNI EN 13984 : 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS |
| UNI 9299 : 1988 | MINERAL FIBER - SEMI-RIGID MINERAL FIBER PANEL FOR THERMAL MATTERS - ACCEPTANCE CRITERIA |
| UNI EN 13169 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION |
| UNI 8625-1 : 1984 | EDILIZIA. PROVE DI COPERTURE DISCONTINUE. DETERMINAZIONE DELLA PERMEABILITA ALL'ACQUA. |
| CEI EN 62305-4 : 2013 | PROTECTION CONTRE LA FOUDRE - PARTIE 4: RESEAUX DE PUISSANCE ET DE COMMUNICATION DANS LES STRUCTURES |
| UNI EN 14308 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| UNI EN 14306 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION |
| UNI 11035-2 : 2010 | STRUCTURAL TIMBER - VISUAL STRENGTH GRADING FOR STRUCTURAL TIMBERS - PART 2: VISUAL STRENGTH GRADING RULES AND CHARACTERISTICS VALUES FOR STRUCTURAL TIMBER POPULATION |
| UNI EN 14933 : 2008 | THERMAL INSULATION AND LIGHT WEIGHT FILL PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| UNI EN 13162 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| UNI 11035-1 : 2010 | STRUCTURAL TIMBER - VISUAL STRENGTH GRADING FOR STRUCTURAL TIMBERS - PART 1: TERMINOLOGY AND MEASUREMENTS OF FEATURES |
| UNI EN 1263-2 : 2003 | TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 2: SAFETY REQUIREMENTS FOR THE POSITIONING LIMITS |
| UNI EN 13167 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| UNI EN 1396 : 2007 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| UNI EN 14063-1 : 2005 | THERMAL INSULATION MATERIALS AND PRODUCTS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN ISO 6158 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES |
| UNI EN 14934 : 2008 | THERMAL INSULATION AND LIGHT WEIGHT FILL PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS - FACTORY MADE PRODUCTS OF EXTRUDED POLYSTYRENE FOAM (XPS) - SPECIFICATION |
| UNI 8178 : 2012 | BUILDING - ROOFINGS - ANALYSIS OF FUNCTIONAL COMPONENTS |
| UNI EN 1991-1-4 : 2010 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
| UNI EN 13859-1 : 2014 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| UNI EN 14316-1 : 2005 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 1172 : 2012 | COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
| UNI EN 14782 : 2006 | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| UNI EN 358 : 2001 | PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS FOR WORK POSITIONING AND RESTRAINT AND WORK POSITIONING LANYARDS |
| UNI 8089 : 2012 | BUILDING - ROOFING AND RELATED FUNCTIONAL COMPONENTS - TERMINOLOGY RELATED TO FUNCTIONAL PERFORMANCE |
| UNI EN 13501-1 : 2009 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
| UNI EN 13111 : 2010 | FLEXIBLE SHEETS FOR WATERPROOFING - UNDERLAYS FOR DISCONTINUOUS ROOFING AND WALLS - DETERMINATION OF RESISTANCE TO WATER PENETRATION |
| UNI EN ISO 12944-2 : 2001 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - CLASSIFICATION OF ENVIRONMENTS |
| UNI EN 13823 : 2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| UNI EN 13168 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
| UNI EN 506 : 2008 | ROOFING PRODUCTS OF METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF COPPER OR ZINC SHEET |
| UNI 9029 : 2011 | BUILDING - METALLIC PRODUCTS FOR DISCONTINUOUS ROOFING - DESCRIPTIVE CLASSIFICATION |
| UNI EN 10088-1 : 2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| UNI EN 1995-1-1 : 2014 | EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| UNI EN 14304 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| UNI EN 1993-1-3 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
| UNI EN 13170 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| UNI EN 508-2 : 2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
| UNI EN 12831 : 2006 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD |
| UNI EN 612 : 2005 | EAVES GUTTERS WITH BEAD STIFFENED FRONTS AND RAINWATER PIPES WITH SEAMED JOINTS MADE OF METAL SHEET |
| UNI EN ISO 2063 : 2005 | THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| UNI EN 13165 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| UNI EN 14313 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| UNI EN 14064-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI 8818 : 1986 | SHEETS FOR ROOFING AND SEALING - CLASSIFICATION BASED ON PRODUCTS DESCRIPTION |
| UNI 8090 : 1980 | BUILDING - ADDITIONAL COMPONENTS OF ROOFING - TERMINOLOGY |
| UNI 11035-3 : 2010 | STRUCTURAL TIMBER - VISUAL STRENGTH GRADING - PART 3: TIMBER USO FIUME AND USO TRIESTE |
| UNI EN 13859-2 : 2014 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| UNI EN 14509 : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNI EN 10025-4 : 2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| UNI EN 1462 : 2005 | BRACKETS FOR EAVES GUTTERS - REQUIREMENTS AND TESTING |
| UNI EN 10025-1 : 2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| CEI EN 62305-2 : 2013 | PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT |
| UNI EN 13374 : 2013 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| UNI EN 12056-3 : 2001 | GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS - ROOF DRAINAGE, LAYOUT AND CALCULATION |
| UNI EN 988 : 1998 | ZINC AND ZINC ALLOYS - SPECIFICATIONS FOR ROLLED FLAT PRODUCTS FOR BUILDING |
| UNI EN 10216-5 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| UNI EN ISO 1264 : 1999 | PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - DETERMINATION OF PH OF AQUEOUS EXTRACT |
| CEI EN 62305-3 : 2013 | PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD |
| UNI EN 14317-1 : 2005 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN ISO 2081 : 2009 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| UNI EN 13166 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| UNI EN 10169 : 2012 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 795 : 2012 | PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES |
| UNI EN 485-4 : 1996 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - TOLERANCES ON SHAPE AND DIMENSIONS FOR COLD-ROLLED PRODUCTS |
| UNI 8091 : 1980 | BUILDING - ROOFING - GEOMETRICAL TERMINOLOGY |
| UNI EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
| UNI EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| UNI 10724 : 2004 | ROOF COVERINGS - RAIN WATER DRAINAGE SYSTEMS - DESIGN AND EXECUTION CRITERIA BY DISCONTINUOUS ELEMENTS |
| UNI EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 14783 : 2013 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| UNI EN 13171 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| UNI EN 508-3 : 2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL |
| UNI EN ISO 3506-3 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| UNI EN 13164 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| UNI EN 573-3 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| UNI EN 508-1 : 2014 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| UNI EN 607 : 2005 | EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING |
| UNI EN 13163 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
| UNI 8811 : 1987 | MINERALS FIBRES - RESIN BOUNDED BLANKETS FOR THERMAL INSULATION - ACCEPTANCE CRITERIA |
| UNI EN 10025-2 : 2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| UNI EN 10025-5 : 2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| UNI 8627 : 2012 | BUILDING - ROOFING - TERMINOLOGY AND CLASSIFICATION OF FUNCTIONAL SCHEMES, CONFORM SOLUTIONS AND TECHNOLOGICAL SOLUTIONS |
| UNI EN 10143 : 2006 | CONTINUOUSLY HOT-DIP COATED STEEL SHEET AND STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.