UNE-EN ISO 683-17:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
Hardcopy , PDF
Spanish, Castilian, English
10-07-2015
04-30-2024
1 Scope
2 Normative References
3 Terms and Definitions
4 Ordering and Designation
5 Requirements
6 Inspection, Testing and Conformance of Products
7 Marking
Annex A (normative) Supplementary or Special Requirements
Annex B (informative) Content of Microscopic Non-Metallic
Inclusions
Annex C (informative) Designations of Comparable Steels
Bibliography
Covers products and heat-treatment conditions shown in Table 1 and surface conditions in Table 2, and provides technical delivery requirements for five types of wrought ball and roller bearing steels detailed in Table 3. These being, case-hardening, through-hardening, induction-hardening (alloyed/unalloyed), stainless and high-temperature bearing steels.
| Committee |
CTN 36
|
| DevelopmentNote |
Supersedes UNE 36027. (07/2003)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
Asociación Española de Normalización
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN ISO 683-17 : 2015 | Identical |
| DIN EN ISO 683-17:2015-02 | Identical |
| ISO 683-17:2014 | Identical |
| NEN EN ISO 683-17 : 2014 | Identical |
| EN ISO 683-17:2014 | Identical |
| I.S. EN ISO 683-17:2014 | Identical |
| NBN EN ISO 683-17 : 2014 | Identical |
| BS EN ISO 683-17:2014 | Identical |
| NS EN ISO 683-17 : 2014 | Identical |
| ONORM EN ISO 683-17 : 2015 | Identical |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| ISO 5949:1983 | Tool steels and bearing steels — Micrographic method for assessing the distribution of carbides using reference photomicrographs |
| ISO 6929:2013 | Steel products — Vocabulary |
| ISO 6506-1:2014 | Metallic materials — Brinell hardness test — Part 1: Test method |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| SAC GB/T 28417 : 2012 | CARBON BEARING STEEL |
| SAC GB/T 3203 : 1982 | CARBURIZING STEELS FOR BEARING |
| ISO/TS 4949:2016 | Steel names based on letter symbols |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| ISO/TR 9769:1991 | Steel and iron — Review of available methods of analysis |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| ISO 4969:2015 | Steel — Etching method for macroscopic examination |
| ISO 16124:2015 | Steel wire rod — Dimensions and tolerances |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 22034-2:2016 | Steel wire and wire products — Part 2: Tolerances on wire dimensions |
| ISO 1035-3:1980 | Hot-rolled steel bars — Part 3: Dimensions of flat bars |
| ISO 1035-4:1982 | Hot-rolled steel bars — Part 4: Tolerances |
| ISO 3763:1976 | Wrought steels — Macroscopic methods for assessing the content of non-metallic inclusions |
| ISO 4948-1:1982 | Steels — Classification — Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| SAC GB/T 18254 : 2002 | HIGH-CARBON CHROMIUM BEARING STEEL |
| EN 10278:1999 | Dimensions and tolerances of bright steel products |
| ISO 3887:2003 | Steels — Determination of depth of decarburization |
| ISO 1035-1:1980 | Hot-rolled steel bars — Part 1: Dimensions of round bars |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 1035-2:1980 | Hot-rolled steel bars — Part 2: Dimensions of square bars |
| ISO 643:2012 | Steels — Micrographic determination of the apparent grain size |
| ISO 4948-2:1981 | Steels — Classification — Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| SAC GB/T 3086 : 2008 | HIGH CARBON CHROMIUM STAINLESS BEARING STEELS |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 9443:1991 | Heat-treatable and alloy steels — Surface quality classes for hot-rolled round bars and wire rods — Technical delivery conditions |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.