UNE-EN 14420-7:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Hose fittings with clamp units - Part 7: Cam locking couplings
Hardcopy , PDF
05-10-2023
Spanish, Castilian, English
12-03-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Requirements
3.1 Construction
3.2 Temperatures
4 Survey
5 Types of connection, survey
6 Designation
7 Dimensions
7.1 General
7.2 Coupler types
7.3 Cam arm (item No 2)
7.4 Pin (item No 3)
7.5 Ring (item No 4)
7.6 Main gasket (item No 5)
7.7 Thread gasket (item No 6)
7.8 Adapter types
8 Materials
8.1 General
8.2 Coupler and adapter body
8.3 Cam arm (item No 2)
8.4 Pin (item No 3)
8.5 Ring (item No 4)
8.6 Main gasket (item No 5)
8.7 Thread gasket (item No 6)
9 Marking
10 Type approval testing and quality control
Annex A (normative) Gauges for cam-locking couplings
A.1 Dimensions and designation
A.2 Material
Bibliography
Specifies the design, materials and dimensions for cam locking couplings that serve as the link between hoses and connections to transport liquids, solids and gases, except liquid gas and steam.
| Committee |
CTN 53/SC 2
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
Asociacion Espanola de Normalizacion
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 14420-7 : 2013 | Identical |
| NF EN 14420-7 : 2013 | Identical |
| NBN EN 14420-7 : 2013 | Identical |
| NEN EN 14420-7 : 2013 | Identical |
| NS EN 14420-7 : 2013 | Identical |
| I.S. EN 14420-7:2013 | Identical |
| SN EN 14420-7 : 2013 | Identical |
| UNI EN 14420-7 : 2013 | Identical |
| BS EN 14420-7:2013 | Identical |
| EN 14420-7:2013 | Identical |
| DIN EN 14420-7:2013-09 | Identical |
| ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
| EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| EN 22768-2:1993 | General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) |
| EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
| EN 14420-1:2013 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| ISO 4957:1999 | Tool steels |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN 14420-5:2013 | Hose fittings with clamp units - Part 5: Threaded connections |
| EN ISO 4957:1999 | Tool steels (ISO 4957:1999) |
| EN 14420-2:2013 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 1706:2010 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
| ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 12420:2014 | Copper and copper alloys - Forgings |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.