UL 60730-1:5ED 2016-08-03
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Automatic Electrical Controls - Part 1: General Requirements
Available format(s)
Hardcopy
Superseded date
10-31-2024
Superseded by
Published date
08-03-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
In general, this part of IEC 60730 applies to automatic ELECTRICAL CONTROLS for use in, on, or in association with equipment for household and similar use.
| DevelopmentNote |
Supersedes UL 8730-1 (09/2001)
|
| DocumentType |
Standard
|
| Pages |
0
|
| PublisherName |
Underwriters Laboratories
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| UL 60730-2-9:4ED 2017-02-14 | Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls |
| CSA C22.2 No. 107.3 : 2014 | UNINTERRUPTIBLE POWER SYSTEMS |
| UL 1647:6ED 2015-08-03 | Motor-Operated Massage and Exercise Machines |
| CSA C22.2 No. 104 : 2011 : R2015 | HUMIDIFIERS |
| ANSI Z21.5.1-2017/CSA 7.1-2017 | Gas clothes dryers, volume I, type 1 clothes dryers |
| UL 429:7ED 2013-11-06 | Electrically Operated Valves |
| UL 508A:3ED 2018-04-24 | Industrial Control Panels |
| UL 737:10ED 2011-04-25 | Standard for Fireplace Stoves |
| UL 1431:3ED 2011-03-23 | Personal Hygiene and Health Care Appliances |
| UL 1727:5ED 2012-05-21 | Commercial Electric Personal Grooming Appliances |
| UL 943B:3ED 2017-12-04 | Appliance Leakage-Current Interrupters |
| UL 697:7ED 2011-03-03 | Toy Transformers |
| UL 1815:5ED 2012-02-29 | Nonducted Heat Recovery Ventilators |
| UL 296:11ED 2017-02-24 | Oil Burners |
| NEMA DC 3:2013 | Residential Controls—Electrical Wall-Mounted Room Thermostats |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| UL 1993:5ED 2017-01-27 | Self-Ballasted Lamps and Lamp Adapters |
| UL 1740:4ED 2018-01-26 | Robots and Robotic Equipment |
| UL 507:10ED 2017-11-09 | Electric Fans |
| CSA C22.2 No. 284 : 2016 | NONINDUSTRIAL PHOTOELECTRIC SWITCHES FOR LIGHTING CONTROL |
| CSA C22.2 No. 112 : 2015 | ELECTRIC CLOTHES DRYERS |
| UL 506:14ED 2017-06-02 | Specialty Transformers |
| UL 756:8ED 2016-08-25 | Standard for Coin and Currency Changers and Actuators |
| UL 2106:2ED 2006-04-18 | Standard for Field Erected Boiler Assemblies |
| UL 1559:5ED 2011-03-21 | Insect-Control Equipment - Electrocution Type |
| UL 458:6ED 2015-09-02 | Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts |
| UL 621:7ED 2010-05-07 | Ice Cream Makers |
| UL 1083:6ED 2009-01-09 | Household Electric Skillets and Frying-Type Appliances |
| UL 291:6ED 2012-02-15 | Automated Teller Systems |
| UL 907:4ED 2016-03-11 | Standard for Fireplace Accessories |
| UL 555S:5ED 2014-02-13 | Smoke Dampers |
| UL 963:4ED 2016-02-26 | Standard for Sealing, Wrapping, and Marking Equipment |
| UL 2108:2ED 2015-12-07 | Low Voltage Lighting Systems |
| UL 795:8ED 2016-12-02 | Commercial-Industrial Gas Heating Equipment |
| C22.2 NO. 1993-17 | Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993) |
| UL 1963:4ED 2011-06-01 | Refrigerant Recovery/Recycling Equipment |
| UL 1236:8ED 2015-04-21 | Battery Chargers for Charging Engine-Starter Batteries |
| UL 150:4ED 2004-11-09 | Antenna Rotators |
| UL 773A:6ED 2016-01-19 | Nonindustrial Photoelectric Switches for Lighting Control |
| UL 763:5ED 2018-02-28 | Motor-Operated Commercial Food Preparing Machines |
| UL 730:5ED 2003-08-29 | Oil-Fired Wall Furnaces |
| UL 923:7ED 2013-05-01 | Microwave Cooking Appliances |
| UL 1018:6ED 2011-04-29 | Electric Aquarium Equipment |
| UL 499:14ED 2014-11-07 | Electric Heating Appliances |
| UL 283:3ED 2015-06-16 | Air Fresheners and Deodorizers |
| UL 1778:5ED 2014-06-13 | Uninterruptible Power Systems |
| UL 391:5ED 2010-09-10 | Standard for Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces |
| UL 896:5ED 1993-07-29 | Oil-Burning Stoves |
| UL 729:6ED 2003-08-29 | Oil-Fired Floor Furnaces |
| UL 555:7ED 2006-07-12 | Fire Dampers |
| UL 462:3ED 2010-12-13 | Standard for Heat Reclaimers for Gas-, Oil-, or Solid Fuel-Fired Appliances |
| UL 916:5ED 2015-10-22 | Energy Management Equipment |
| UL 731:6ED 2018-01-31 | Oil-Fired Unit Heaters |
| UL 1795:5ED 2016-09-02 | Standard for Hydromassage Bathtubs |
| UL 791:5ED 2006-11-10 | Residential Incinerators |
| UL 858:16ED 2014-11-07 | Household Electric Ranges |
| UL 696:10ED 2010-02-17 | Standard for Electric Toys |
| ANSI Z83.21 : 2016 | COMMERCIAL DISHWASHERS |
| CSA C22.2 No. 167 : 2017 | HOUSEHOLD DISHWASHERS |
| CSA C22.2 No. 169 : 2015 | ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS |
| CSA C22.2 No. 168 : 2016 | COMMERCIAL DISHWASHERS |
| CSA C22.2 No. 104:2011 | HUMIDIFIERS |
| UL 482:9ED 2005-09-02 | Standard for Portable Sun/Heat Lamps |
| UL 1447:6ED 2017-10-13 | Standard for Electric Lawn Mowers |
| UL 1563:6ED 2009-07-16 | Electric Spas, Equipment Assemblies, and Associated Equipment |
| UL 82:9ED 2017-08-31 | Electric Gardening Appliances |
| UL 541:9ED 2016-04-21 | Refrigerated Vending Machines |
| UL 1482:7ED 2011-04-25 | Solid-Fuel Type Room Heaters |
| UL 508:18ED 2018-03-30 | Industrial Control Equipment |
| UL 1090:7ED 2016-10-05 | Electric Snow Movers |
| UL 325:7ED 2017-05-19 | Door, Drapery, Gate, Louver, and Window Operators and Systems |
| UL 73:10ED 2011-03-02 | Standard for Motor-Operated Appliances |
| CSA C22.2 No. 104 : 2011 : INC : UPD 1 : 2016 : R201500 | HUMIDIFIERS |
| C22.2 NO. 243-17 | Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017) |
| C22.2 NO. 236-15 | Heating and cooling equipment (Bi-national standard with UL 1995) |
| SAE J3030_201507 | Automotive Refrigerant Recovery/Recycling/Recharging Equipment Intended for use with Both R-1234yf and R-134a |
| ANSI Z21.5.1-2017/CSA 7.1-2017 | Gas clothes dryers, volume I, type 1 clothes dryers |
| CISPR 14-1:2016 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC 60038:2009 | IEC standard voltages |
| UL 863:8ED 2007-11-16 | Standard for Time-Indicating and -Recording Appliances |
| IEC 60245-1:2003+AMD1:2007 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements |
| IEC 60738-1:2006+AMD1:2009 CSV | Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification |
| IEC 60664-4:2005 | Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress |
| UL 514A:11ED 2013-02-01 | Metallic Outlet Boxes |
| IEC 60384-14:2013+AMD1:2016 CSV | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
| UL 50:13ED 2015-10-16 | Enclosures for Electrical Equipment, Non-Environmental Considerations |
| UL 5085-3:1ED 2006-04-17 | Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers |
| UL 486D:6ED 2015-06-19 | Sealed Wire Connector Systems |
| IEC 60998-2-3:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units |
| ISO 16484-2:2004 | Building automation and control systems (BACS) — Part 2: Hardware |
| UL 4200A:1ED 2015-02-10 | Products Incorporating Button Batteries or Coin Cell Batteries |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| IEC 61210:2010 | Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
| UL 1283:7ED 2017-05-17 | Electromagnetic Interference Filters |
| IEC 62151:2000 | Safety of equipment electrically connected to a telecommunication network |
| IEC 61558-2-16:2009+AMD1:2013 CSV | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| UL 83:16ED 2017-07-28 | Standard for Thermoplastic-Insulated Wires and Cables |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Low-voltage fuses - Part 1: General requirements |
| UL 917:5ED 2006-11-10 | Standard for Clock-Operated Switches |
| IEC 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
| IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV | Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links |
| UL 635:3ED 2012-03-08 | Insulating Bushings |
| IEC 60227-1:2007 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements |
| IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| UL 514C:4ED 2014-04-08 | Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| IEC 60998-2-2:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
| IEC 61000-4-28:1999+AMD1:2001+AMD2:2009 CSV | Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
| IEC 60384-17:2005 | Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 61058-1:2016 | Switches for appliances - Part 1: General requirements |
| IEC 60738-1-1:2008 | Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ |
| IEC 60099-1:1991+AMD1:1999 CSV | Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
| UL 372:6ED 2007-07-31 | Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Burner Ignition Systems and Components |
| IEC 61643-11:2011 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
| IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
| UL 746A:6ED 2012-09-06 | Polymeric Materials - Short Term Property Evaluations |
| UL 429:7ED 2013-11-06 | Electrically Operated Valves |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60664-3:2016 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
| CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| UL 1577:5ED 2014-04-25 | Optical Isolators |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
| IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV | Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests |
| IEC 60384-16:2005 | Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.