UFC 4-211-01 : Change 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS
11-19-2022
04-17-2017
CHAPTER 1 - INTRODUCTION
CHAPTER 2 - PLANNING AND LAYOUT
CHAPTER 3 - GENERAL HANGAR REQUIREMENTS
CHAPTER 4 - EMERGING AIRCRAFT
CHAPTER 5 - AIR FORCE SPECIFIC CRITERIA
CHAPTER 6 - ARMY SPECIFIC CRITERIA
CHAPTER 7 - NAVY SPECIFIC CRITERIA
APPENDIX A - REFERENCES
APPENDIX B - GLOSSARY
APPENDIX C - BEST PRACTICES
APPENDIX D - QUESTIONNAIRE
APPENDIX E - PHOTOGRAPHS
Gives requirements for Aircraft Maintenance Hangars.
DevelopmentNote |
Supersedes UFC 4-211-01N.
|
DocumentType |
Standard
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
UFC 3-260-11FA : 2005 | UNIFIED FACILITIES CRITERIA - MODEL DESIGN-BUILD (D-B) REQUEST FOR PROPOSAL (RFP) FOR AIRFIELD CONTRACTS |
UFC 3-520-01 : 2015 | UNIFIED FACILITIES CRITERIA - INTERIOR ELECTRICAL SYSTEMS |
ASTM C 423 : 2017 : REDLINE | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
ANSI A250.8 : 2014 | SPECIFICATIONS FOR STANDARD STEEL DOORS AND FRAMES |
UFC 4-010-01 : 2018 | UNIFIED FACILITIES CRITERIA - DOD MINIMUM ANTITERRORISM STANDARDS FOR BUILDINGS |
BHMA A156.6 : 2010 | ARCHITECTURAL DOOR TRIM |
UFC 3-440-01 : V20020614 | UNIFIED FACILITIES CRITERIA - FACILITY-SCALE RENEWABLEENERGY SYSTEMS |
UFC 3-410-02 : Change 1 | UNIFIED FACILITIES CRITERIA - LONWORKS[R] DIRECT DIGITAL CONTROL FOR HVAC AND OTHER LOCAL BUILDING SYSTEMS |
BHMA A156.3 : 2014 | EXIT DEVICES |
AISC 325 : 2017 | STEEL CONSTRUCTION MANUAL |
CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
ASTM E 1996 : 2017 : REDLINE | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
UFC 4-211-02 : 2012 | UNIFIED FACILITIES CRITERIA - AIRCRAFT CORROSION CONTROL AND PAINT FACILITIES |
AISC 341 : 2016 | SEISMIC PROVISIONS FOR STRUCTURAL STEEL BUILDINGS |
NFPA 101 : 2018 | LIFE SAFETY CODE |
UFC 3-410-04N : 2004 | UNIFIED FACILITIES CRITERIA - INDUSTRIAL VENTILATION |
ASHRAE 90.1 : 1999 | ENERGY STANDARD FOR BUILDINGS EXCEPT LOW-RISE RESIDENTIAL BUILDINGS |
NEMA 250 : 2014 | ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM) |
NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
ASME A13.1 : 2015 | SCHEME FOR THE IDENTIFICATION OF PIPING SYSTEMS |
UFC 3-400-02 : 2003 | UNIFIED FACILITIES CRITERIA - DESIGN: ENGINEERING WEATHER DATA |
CEA 709.1 : D2014 | CONTROL NETWORK PROTOCOL SPECIFICATION |
ACI 360R : 2010 | GUIDE TO DESIGN OF SLABS-ON-GROUND |
ANSI MH27.1 : 2016 | PATENTED TRACK UNDERHUNG CRANES & MONORAIL |
BHMA A156.22 : 2017 | DOOR GASKETING AND EDGE SEAL SYSTEMS |
ASHRAE 189.1 : 2014 | DESIGN OF HIGH-PERFORMANCE GREEN BUILDINGS |
NFPA 24 : 2016 | INSTALLATION OF PRIVATE FIRE SERVICE MAINS AND THEIR APPURTENANCES |
UFC 3-310-04 : Change 1 | UNIFIED FACILITIES CRITERIA - SEISMIC DESIGN FOR BUILDINGS |
ASME HST 1 : 2012 | PERFORMANCE STANDARD FOR ELECTRIC CHAIN HOISTS |
BHMA A156.4 : 2013 | DOOR CONTROLS - CLOSERS |
UFC 1-200-01 : 20071127 | UNIFIED FACILITIES CRITERIA (UFC) DOD BUILDING CODE(GENERAL BUILDING REQUIREMENTS) |
BHMA A156.8 : 2015 | DOOR CONTROLS - OVERHEAD STOPS AND HOLDERS |
ICC IBC INTERNATIONAL BUILDING CODE : 2015 | INTERNATIONAL BUILDING CODE |
ASCE 7 10 : 2010 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
ASHRAE 62 : 2001 | VENTILATION FOR ACCEPTABLE INDOOR AIR QUALITY |
NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
UFC 3-250-01FA : 2004 | UNIFIED FACILITIES CRITERIA - PAVEMENT DESIGN FOR ROADS, STREETS, WALKS, AND OPEN STORAGE AREAS |
UFC 3-420-01 : Change 10 | UNIFIED FACILITIES CRITERIA - PLUMBING SYSTEMS |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
UFC 3-410-01 : Change 4 | UNIFIED FACILITIES CRITERIA - HEATING, VENTILATING, AND AIR CONDITIONING SYSTEMS |
MIL F 24385 : F | FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM, (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
NFPA 72 : 2016 | NATIONAL FIRE ALARM AND SIGNALING CODE |
NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
ANSI Z358.1 : 2014 | EMERGENCY EYEWASH AND SHOWER EQUIPMENT |
NFPA 409 : 2016 | AIRCRAFT HANGARS |
FAA AC 150/5210-5 : 0 | PAINTING, MARKING AND LIGHTING OF VEHICLES USED ON AN AIRPORT |
FAA AC 150/5200-28 : 2008 | NOTICES TO AIRMEN (NOTAMS) FOR AIRPORT OPERATORS |
ACI 302.2R : 2006 | GUIDE FOR CONCRETE SLABS THAT RECEIVE MOISTURE-SENSITIVE FLOORING MATERIALS |
UFC 3-601-02 : 2010 | UNIFIED FACILITIES CRITERIA - OPERATIONS AND MAINTENANCE: INSPECTION, TESTING, AND MAINTENANCE OF FIRE PROTECTION SYSTEMS |
BHMA A156.2 : 2017 | BORED AND PREASSEMBLED LOCKS AND LATCHES |
ICC IMC INTERNATIONAL MECHANICAL CODE : 2015 | INTERNATIONAL MECHANICAL CODE |
ASHRAE 135 : 2016 | BACNET - A DATA COMMUNICATION PROTOCOL FOR BUILDING AUTOMATION AND CONTROL NETWORKS |
UFC 3-301-01 : Change 3 | UNIFIED FACILITIES CRITERIA - STRUCTURAL ENGINEERING |
UFC 3-580-01 : Change 1 | UNIFIED FACILITIES CRITERIA - TELECOMMUNICATIONS INTERIOR INFRASTRUCTURE PLANNING AND DESIGN |
ASHRAE 55 : 2017 | THERMAL ENVIRONMENTAL CONDITIONS FOR HUMAN OCCUPANCY |
BHMA A156.21 : 2014 | THRESHOLDS |
BHMA A156.1 : 2016 | BUTTS AND HINGES |
UFC 4-021-01 : Change 1 | UNIFIED FACILITIES CRITERIA - DESIGN AND O&M;: MASS NOTIFICATION SYSTEMS |
UFC 4-021-02 : 2013 | UNIFIED FACILITIES CRITERIA - ELECTRONIC SECURITY SYSTEMS |
FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
UFC 3-401-01 : Change 1 | UNIFIED FACILITIES CRITERIA - MECHANICAL ENGINEERING |
NFPA 20 : 2016 | INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION |
UFC 4-121-10N : 2004 | UNIFIED FACILITIES CRITERIA - DESIGN: AIRCRAFT FIXED POINT UTILITY SYSTEMS |
UFC 3-530-01 : Change 3 | UNIFIED FACILITIES CRITERIA - INTERIOR AND EXTERIOR LIGHTING SYSTEMS AND CONTROLS |
BHMA A156.26 : 2012 | CONTINUOUS HINGES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.