TT-S-735 Revision A:1988
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STANDARD TEST FLUIDS, HYDROCARBON (S/S BY ASTM-D471)
Available format(s)
PDF
Published date
08-31-1988
Publisher
Superseded date
09-11-1998
Superseded by
US$20.00
Excluding Tax where applicable
Requirements for standard fluids used in contact testing of various materials to determine their resistance to hydrocarbon fluids.
| DevelopmentNote |
FUTURE ACQUISITION FOR THIS ITEM SHOULD REFER TO ASTM D 471
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE MA2094 | Test Methods for Tube-Fitting Assemblies, Metric (ISO 10583) |
| CCC-C-700 Revision J:1986 | CLOTH, COATED, VINYL COATED (ARTIFICIAL LEATHER) (S/S BY A-A-59517) |
| MIL-V-25023 Revision B:1967 | Valve, Fuel Drain, Self-Locking |
| MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| DOD E 24635 : (1) | ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
| MIL-STD-1214 Revision A:1990 | ESTERS AND METAL ORGANICS, TECHNICAL GRADE (NO S/S DOCUMENT) |
| TT-P-664 Revision D:1988 | PRIMER COATING, ALKYD, CORROSION-INHIBITING, LEAD AND CHROMATE FREE, VOC-COMPLIANT (S/S BY SSPC-PAINT25) |
| JSGS-87231 Revision A:1995 | Engines, Aircraft, Turbine (S/S by JSSG-2007) |
| MIL T 6396 : E | TANKS, AIRCRAFT PROPULSION FLUID SYSTEM, INTERNAL REMOVABLE, NON-SELF-SEALING |
| MIL-S-7124 Revision B:1966 | SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED, FOR AIRCRAFT STRUCTURES (S/S BY SAE-AMS-S-7124) |
| MIL-S-45180 Revision D:1984 | Sealing Compound, Gasket, Hydrocarbon Fluid and Water Resistant |
| L-F-475 Revision A:1965 | Floor Covering Vinyl, Surface (Tile and Roll), with Backing (No S/S Document) |
| TT-V-119 Revision D:1973 | VARNISH, SPAR, PHENOLIC-RESIN (S/S BY A-A-1800) |
| MIL-S-29574 Base Document:1989 | SEALING COMPOUND, POLYTHIOETHER, FOR AIRCRAFT STRUCTURES, FUEL AND HIGH TEMPERATURE RESISTANT, FAST CURING AT AMBIENT AND LOW TEMPERATURE (S/S BY SAE-AMS3277, SEE NOTICE 1 FOR ADDITIONAL INFORMATION) |
| MIL-C-46168 Revision D:1987 | Coating, Aliphatic Polyurethane, Chemical Agent Resistant (See Notice 1 for Replacement Information) |
| MIL P 8116 : B | PUTTY, ZINC CHROMATE, GENERAL PURPOSE |
| MIL-C-8605 Revision B:1990 | Cap; Pressure Fuel Servicing |
| MIL-L-46159 Revision A:1976 | Lacquer, Acrylic, Low Reflective (S/S by MIL-C-46168 or MIL-c-53039 now MIL-DTL-53039) |
| MIL-PRF-3043 Revision C:1998 | Resin Coating, Permanent, for Engine Components and Metal Parts |
| MIL-C-0016809 Revision C:1969 | Case, Medical Instrument and Supply Set, Nonrigid, No. 4 (No S/S Document) |
| MIL B 131 : H | BARRIER MATERIAL, WATER VAPOR PROOF, GREASEPROOF, FLEXIBLE HEAT SEALABLE |
| MIL H 27516 : D | HOSE AND HOSE ASSEMBLY, NON-METALLIC, SUCTION AND DISCHARGE |
| MIL H 27267 : B | HOSE TETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE |
| MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
| TT-P-1757 Revision B:1997 | Primer Coating, ALKYD Base, One Component |
| MIL-S-85312 Base Document:1979 | SEALING COMPOUND, NONCURING, POLYSULFIDE, GROOVE INJECTION, FOR INTEGRAL FUEL TANKS |
| MIL-R-46082 Revision B:1983 | Retaining Compounds, Single Component, Anaerobic (S/S by ASTM-D5363) |
| MIL-C-47244 Revision A:1990 | Coating, Ablative Resistant |
| TT-P-662 Revision B:1969 | PRIMER SURFACER, SANDING, LACQUER AND ENAMEL TYPE (NO S/S DOCUMENT) |
| MIL-H-2217 Revision D:1993 | Hose Assemblies, Wire-Reinforced Rubber, Submarine Rescue Chamber (See Notice 1 forReplacement Information) |
| SAE AMSR25988A | Rubber, Fluorosilicone Elastomer, Oil-and-Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded Shapes |
| SAE AS 1501 : 1994 | HOSE, AIR DUCT, FLEXIBLE, NONMETALLIC, AIRCRAFT |
| MIL H 25579 : E | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, HIGH TEMPERATURE MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MIL-G-3036 Revision C:1978 | Grommet, Elastic, Hot Oil and Coolant Resistant (S/S By NASM3036) |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| MIL-N-52110 Revision F:1982 | Nozzles, Fuel and Oil Servicing, Nonautomatic Shutoff and Nozzles, Fuel Servicing, Automatic Shutoff (S/S by A-A-52030) |
| SAEITC TSC47-012_04 | POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT |
| MIL-S-82496 Revision A:1977 | Screws, Machine, Self Sealing, Integral O-Ring (S/S by NASM82496) |
| MIL-S-8802 Revision F:1990 | SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH-ADHESION (S/S BY SAE-AMS-S-8802) |
| MIL-C-83231 Revision A:1981 | Coatings, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts (S/S by SAE-AMS-C-83231) |
| MIL-S-4383 Revision C:1986 | SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N TYPE (S/S BY SAE-AMS-S-4383) |
| SAE MA620 | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft Metric |
| MIL C 3702 : B | CABLE, POWER, ELECTRICAL, IGNITION, HIGH TENSION |
| MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
| SAE AS1969 | Coupling Assembly, Self-Sealing, Quick Disconnect Fuel and Oil System Components |
| MIL-E-52929 Base Document:1977 | Enamel, Alkyd, Camouflage, Flash Dry (S/S by MIL-C-46168 or MIL-DTL-53039) |
| MIL A 9117 : D | ADHESIVE, SEALING, FOR AROMATIC FUEL CELLS AND GENERAL REPAIR |
| MIL S 8516 : F | SEALING COMPOUND, POLYSULFIDE RUBBER, ELECTRIC CONNECTORS AND ELECTRICAL SYSTEMS CHEMICALLY CURED |
| MIL-P-38336 Revision A:1994 | PRIMER COATING, INORGANIC, ZINC DUST PIGMENTED, SELF-CURING, FOR STEEL SURFACES (S/S BY SAE-AMS-P-38336) |
| MIL-C-83445 Revision A:1980 | Coating System, Polyurethane, Non-Yellowing, White, Rain Erosion Resistant, Thermally Reflective (S/S by SAE-AMS-C-83445) |
| MIL-I-17563 Revision C:1992 | Impregnants for Cast of Powder Metal Components |
| DOD-P-24555 Base Document:1977 | Paint, Aluminum, Heat-Resisting (650 Degree C), Low-Emissivity (0.40 or Less) (Metric) |
| MIL P 52995 : 0 | PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE |
| TT-E-506 Revision K:1977 | Enamel, Alkyd, Gloss, Tints and White (for Interior Use) (See Notice 1 for Replacement Information) |
| MIL V 7899 : C | VALVE, CHECK, AIRCRAFT FUEL SYSTEM |
| MIL-H-4495 Revision D:1985 | Hose Assembly, Rubber, Aerial Refueling |
| MIL-C-15104 Revision F:1991 | Cloth, Coated, Flame Resistant, Berth and Bedding Cover (No S/S Document) |
| MIL B 22019 : C | BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
| MIL H 6615 : E | HOSE ASSEMBLIES, RUBBER, FUEL AND WATER, WITH DETACHABLE COUPLINGS, LOW TEMPERATURE |
| MIL-P-52192 Revision B:1971 | Primer Coating, Epoxy (S/S by MIL-P-53022, or MIL-P-53030) |
| TT-P-636 Revision D:1971 | PRIMER COATING, ALKYD, WOOD AND FERROUS METAL (S/S BY TT-P-664, MIL-P-53030) |
| MIL C 46081 : A | COATING COMPOUND, THERMAL INSULATING (INTUMESCENT) |
| MIL-HDBK-692 Revision B:1983 | A Guide to the Selection of Rubber O-Rings |
| MIL E 46117 : A | |
| MIL L 46171 : NOTICE 1 | LACQUER, LUSTRELESS, HOT SPRAY FOR TIP IDENTIFICATION OF AMMUNITION (FOR PROCUREMENT USE MIL-L-1195) |
| MIL-R-9208 Revision B:1968 | REPAIR MATERIAL, FOR SELF-SEALING FUEL TANKS (NO S/S DOCUMENT) |
| MIL H 5593 : C | HOSE, AIRCRAFT, LOW-PRESSURE, FLEXIBLE |
| MIL-PRF-26915 Revision D:1997 | Primer Coating, for Steel Surfaces (Future Acquisitions for this Item May Refer to: MIL-PRF-32550 and MIL-DTL-53022) |
| MIL I 25017 : E | INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (METRIC) |
| MIL-I-3158 Revision D:1968 | Insulation Tape, Electrical Glass-Fiber (Resin-Filled): and Cord, Fibrous-Glass |
| MIL-C-38373 Revision B:1975 | Cap, Fluid Tank Filler (No S/S Document) |
| MIL-C-83019 Base Document:1968 | Coating, Polyurethane, for Protection of Integral Fuel Tank Sealing Compound |
| MIL L 11195 : D | LACQUER, LUSTRELESS, HOT SPRAY |
| MIL P 26915 : C | PRIMER COATING, ZINC DUST PIGMENTED, FOR STEEL SURFACES |
| MIL-C-29475 Base Document:1994 | Coating, Water Borne Polyurethane Camouflage (S/S by MIL-DTL-64159) |
| SAE AS8796 | Hose, Air Duct, Flexible, Aircraft |
| MIL-C-83982 Base Document:1974 | Compound, Sealing, Fluid Resistant (S/S by MIL-S-81733) |
| MIL-S-8710 Revision B:1969 | Strainer, Airframe Fuel System, General Specification for |
| MIL-P-53032 Base Document:1983 | PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER-LATEX TYPE, LEAD AND CHROMATE FREE (NO S/S DOCUMENT) |
| MIL-C-27725 Revision B:1969 | Coating, Corrosion Preventive, for Aircraft Integral Fuel Tanks (S/S by SAE-AMS-C-27725) |
| TT-E-485 Revision F:1968 | ENAMEL, SEMIGLOSS, RUST-INHIBITING (NO S/S DOCUMENT) |
| MIL P 46093 : A | PRIMER COATING, SYNTHETIC (FOR BRAKE DRUMS) |
| MIL-P-22332 Revision B:1972 | Paint, Priming, Exterior and Interior (for Ammunition) (S/S by MIL-DTL-11414) |
| TT P 659 : C | PRIMER COATING & SURFACER SYNTHETIC, TINTS & WHITE, (FOR METAL & WOOD SURFACE) |
| ZZ-H-466 Revision C:1968 | Hose Assembly, Metal (Rubber Covered), Hydrocarbon Conveying (No S/S Document) |
| MIL-V-8610 Revision B:1984 | Valve, Fuel Shutoff Solenoid Operated, 28 Volt DC |
| L-T-100 Revision B:1988 | Tape, Pressure-Sensitive Adhesive, Polyester Film |
| MIL H 6000 : B | HOSE, RUBBER [FUEL, OIL, COOLANT, WATER AND ALCOHOL] |
| MIL P 19834 : B | PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED |
| MIL-PRF-8516 Revision G:1997 | Sealing Compound, Synthetic Rubber, Electric Connectors and Electric Systems, Chemically Cured |
| MIL C 25516 : D | CONNECTOR, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
| MIL-B-81820 Revision F:1994 | Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation, General Specification for (S/S by SAE-AS81820) |
| MIL-B-8942 Revision A:1965 | Bearings, Plain, TFE Lined, Self-Aligning |
| MIL H 8794 : D | HOSE, RUBBER, HYDRAULIC, FUEL AND OIL RESISTANT |
| MIL C 46127 : A | COATING, GRAY, UNDERCOAT (SOLAR HEAT REFLECTING) |
| MIL-E-52835 Revision A:1977 | Enamel, Modified Alkyd, Camouflage, Lusterless (S/S by MIL-C-46168 or MIL-DTL-53039) |
| MIL C 22263 : B | COUPLING FUEL LINE, FLEXIBLE, 125 PSI, GENERAL SPECIFICATION FOR |
| MIL L 52909 : NOTICE 1 | LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS |
| MIL W 5846 : C | WIRE, ELECTRICAL, CHROMEL AND ALUMEL, THERMOCOUPLE |
| SAE ARP1616B | Self-Sealing Breakaway Valves for Crash-Resistant Aircraft Fuel and Oil Systems |
| MIL-R-7575 Revision C:1966 | Resin, Polyester, Low-Pressure Laminating |
| MIL F 87260 : 0 | FOAM MATERIAL, EXPLOSION SUPPRESSION, INHERENTLY ELECTRICALLY CONDUCTIVE, FOR AIRCRAFT FUEL TANK & DRY BAY AREAS |
| MIL E 46136 : A | ENAMEL, SEMI-GLOSS, ALKYD, SOLAR HEAT REFLECTING, OLIVE DRAB |
| MIL-P-52905 Revision A:1994 | PAINT CAMOUFLAGE, REMOVABLE (NO S/S DOCUMENT) |
| BS ISO 8829-2:2006 | Aerospace. Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Non-metallic braid |
| TT-E-515 Revision A:1971 | ENAMEL, ALKYD, LUSTERLESS, QUICK-DRYING (NO S/S DOCUMENT) |
| GGG-H-33 Revision B:1996 | HAMMERS, HAND AND MALLETS, SURFACE PROTECTIVE; HOLDERS AND ADAPTERS, INSERTED HAMMER FACE, AND FACES, HAMMER, INSERTED (NO S/S DOCUMENT) |
| MIL-S-83315 Base Document:1971 | SEALING COMPOUND, ALUMINUM STRUCTURE, PRESSURE AND WEATHER SEALING, LOW DENSITY (NO S/S DOCUMENT) |
| MIL L 46142 : 0 | LACQUER, LUSTRELESS, SOLAR HEAT REFLECTING |
| MIL-I-7444 Revision D:1984 | Insulation Sleeving, Electrical, Flexible (See Notice 3 for Replacement Information) |
| MIL-B-24911 Base Document:1983 | Boots, Flyers, Aircrew |
| MIL-W-5845 Revision C:1973 | Wire, Electrical, Iron Constantan, Thermocouple (No S/S Document) |
| MIL C 24788 : 0 | COUPLING ASSEMBLY, SEMI-DRY-BREAK QUICK-DISCONNECT, FUEL WITH OR WITHOUT CONTINUITY SWITCH |
| MIL-P-7962 Revision D:1980 | PRIMER COATING, CELLULOSE-NITRATE MODIFIED ALKYD TYPE, CORROSION-INHIBITING, FAST-DRYING (FOR SPRAY APPLICATION OVER PRETREATMENT COATING) (NO S/S DOCUMENT) |
| MMM-A-134 Base Document:1970 | Adhesive, Epoxy Resin, Metal to Metal Structural Bonding |
| MIL-P-62669 Base Document:1991 | PRIMER COATING, SYNTHETIC, VOC COMPLIANCE (FOR BRAKE DRUMS) (S/S BY A-A-52465) |
| ASTM D 2792 : 2017 : REDLINE | Standard Practice for Solvent and Fuel Resistance of Traffic Paint |
| MIL-H-46354 Revision A:1974 | Headrest, Optical Instrument |
| MIL-L-19538 Revision C:1970 | Lacquer, Acrylic Nitrocellulose, Camouflage (for Aircraft Use) (S/S by MIL-L-81352) |
| MIL B 22191 : D | BARRIER MATERIAL, TRANSPARENT, FLEXIBLE, HEAT SEALABLE |
| MIL H 24565 : 0 | HOSE AND FITTINGS, OIL AND TURBINE FUEL, SMOOTH BORE, CORRUGATED COVER, 7 INCH |
| MIL-C-6183 Revision B:1981 | Cork and Rubber Composition Sheet, for Aromatic Fuel and Oil Resistant Gaskets (S/S by SAE-AMS-C-6183) |
| MIL-A-25896 Revision E:1983 | Adapter, Pressure Fuel Servicing, Nominal 2.5-Inch Diameter |
| MIL H 22279 : C | HOSE ASSEMBLIES, RUBBER, AIRCRAFT FUELING, COLLAPSIBLE, BY NEGATIVE PRESSURE |
| MIL-W-5908 Revision D:1973 | WIRE, ELECTRICAL, COPPER AND CONSTANTAN, THERMOCOUPLE (NO S/S DOCUMENT) |
| MIL-C-7488 Revision A:1974 | Cooler, Oil, Plate, Aircraft (S/S by MIL-PRF-25478) |
| DEFSTAN 47-12/3(1978) : 1978 | SPECIFICATION FOR POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT. |
| TT-S-178 Revision B:1972 | SEALER, SURFACE RENEWER FOR WOOD AND SEALER FOR CONCRETE (NO S/S DOCUMENT) |
| MIL-S-11030 Revision F:1990 | Sealing Compound, Single-Component, Non-Curing, Polysulfide Base |
| MIL-L-52043 Revision C:1972 | Lacquer, Semi Gloss, Cellulose Nitrate (No S/S Document) |
| MIL-I-3190 Revision F:1991 | Insulation Sleeving, Electrical, Flexible, Coated, General Specification for |
| ADS-13F-HDBK : 1997 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
| MIL H 7061 : B | HOSE, RUBBER, AIRCRAFT, SELF SEALING, AROMATIC FUEL |
| MIL C 10799 : H | CLOTH, COATED, COTTON, VINYL COATED, FIRE AND MILDEW RESISTANT |
| MIL D 22706 : F | DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE |
| MIL B 83054 : B | BAFFLE AND INERTING MATERIAL, AIRCRAFT FUEL TANK |
| MIL-S-8784 Revision B:1971 | Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates (S/S by SAE-AMS3284) |
| SAE AMSR83485A | Rubber, Fluorocarbon Elastomer, Improved Perfrormance At Low Temperatures |
| SAE AMS3267B | Sealing Compound, Low Adhesion, Corrosion Inhibiting, for Removable Panels and Fuel Tank Inspection Plates |
| ISO 8829-2:2006 | Aerospace — Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies — Part 2: Non-metallic braid |
| MIL-B-81934 Revision B:1991 | Bearings, Sleeve, Plain and Flanged, Self-Lubricating, General Specification for (S/S by SAE-AS81934) |
| MIL-F-8615 Revision D:1976 | Fuel System Components, General Specification for (S/S by SAE-ARP8615) |
| MIL P 52977 : 0 | PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE |
| GG-P-455 Revision B:1967 | PLATES AND FOILS, PHOTOGRAPHIC (PHOTOSENSITIVE ANODIZED ALUMINUM) |
| MIL-T-81838 Base Document:1971 | Tank, Fuel, Aircraft, Auxiliary External 300 Gallon, Type AERO-1D |
| MIL-B-21408 Revision G:1984 | Boots, Safety (S/S by A-A-59530) |
| MIL-B-8943 Revision A:1966 | Bearing, Journal-Plain and Flanged, TFE Lined (S/S by SAE-AS8943) |
| MIL H 13444 : E | HOSE & HOSE ASSEMBLIES, RUBBER: FUEL AND OIL |
| MIL-R-9300 Revision B:1968 | Resin, Epoxy, Low-Pressure Laminating |
| MIL-B-83277 Revision A:1975 | Boots, Flyers\' FWU-8/P (No S/S Document) |
| MIL-N-25161 Revision C:1969 | NOZZLE, AERIAL PRESSURE REFUELING, TYPE MA-2 |
| MIL-T-23142 Revision B:1977 | TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR DISSIMILAR METAL SEPARATION (S/S BY A-A-59298) |
| MIL-P-8045 Revision B:1964 | Plastic, Self-Sealing and Non-Self-Sealing Tank Backing Material |
| MIL-R-83309 Base Document:1971 | REPAIR MATERIAL, NITRILE, FUEL, BLADDER, AIRCRAFT (NO S/S DOCUMENT) |
| MIL B 85036 : A | BARRIER MATERIAL, HEAVY DUTY, FOR FLEXIBLE ENGINE CONTAINERS |
| MIL-P-85315 Base Document:1979 | Pump, Ejector, Air Vehicle Fuel, General Specification For |
| MIL P 47115 : A | PAINT, EPOXY, ABRASION, HEAT AND CORROSION RESISTANT |
| MIL-R-83485 Base Document:1976 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES (S/S BY SAE-AMS-R-83485) |
| MIL-R-9299 Revision C:1968 | RESIN, PHENOLIC, LAMINATING (NO S/S DOCUMENT) |
| MIL-D-26124 Revision B:1977 | Duct and Duct Assembly, Pneumatic, Flexible (S/S by MIL-D-22706) |
| MIL-P-5315 Revision B:1964 | PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT (S/S BY SAE-AMS-P-5315) |
| MIL B 81391 : NOTICE 1 | BAG, WATERVAPORPROOF, ONE FACE TRANSPARENT, FOR INTERIOR PACKAGING |
| MIL R 3043 : B | RESIN COATING, UNPIGMENTED FOR ENGINE COMPONENTS AND METAL PARTS |
| MIL R 25988 : B | RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| MIL-C-43656 Revision A:1982 | Cloth, Coated Polyester, Silicone Rubber (No S/S Document) |
| MIL L 46138 : 0 | LACQUER, LUSTRELESS, ACRYLIC NITROCELLULOSE, SOLAR HEAT REFLECTING, OLIVE DRAB |
| MIL-P-20628 Revision B:1971 | PUTTY, SEALING (FOR BOLTED STEEL STORAGE TANKS) (NO S/S DOCUMENT) |
| DEFSTAN 47-12/4(1987) : 1987 | POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT |
| MIL-STD-1262 Base Document:1967 | DEGRADATION TESTS FOR FUELS AND FUEL CONTAINER COATINGS (TEST PROCEDURE) (NO S/S DOCUMENT) |
| SAE MA2241 | Coupling Assembly, Threadless, Flexible, Fixed Cavity, Self-Bonding, Metric |
| MIL-H-7938 Revision A:1983 | Hose, Rubber, Flame-Resistant (No S/S Document) |
| TT-E-1593 Revision B:1974 | ENAMEL, SILICONE ALKYD COPOLYMER, GLOSS (FOR EXTERIOR AND INTERIOR USE) (NO S/S DOCUMENT) |
| MIL-C-53071 Base Document:1987 | Coupling Assemblies, Quick-Disconnect, Sexless Type (S/S by A-A-59377) |
| SAE MA2079 | Hose Assembly, Convoluted Polytetrafluoroethylene, High Temperature, Medium Pressure, Aircraft, Metric |
| SAE MA2250 | Coupling Fuel, Flexible Variable Cavity, Threaded Type with Ferrules, Metric |
| MIL I 27686 : F | INHIBITOR, ICING, FUEL SYSTEM |
| FED-STD-313 Revision D:1996 | Material Safety Data, Transportation Data, and Disposal Data for Hazardous Materials Furnished to Government Activities |
| FED-STD-601 Base Document:1955 | Rubber: Sampling and Testing |
| MIL-STD-290 Revision H:2013 | Packaging and Marking of Petroleum and Related Products |
| MIL T 5624 : R | TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
| ASTM E 260 : 1996 | Standard Practice for Packed Column Gas Chromatography |
| TT-T-548 Revision F:1991 | TOLUENE, TECHNICAL (S/S BY A-A-59107) |
| FED-STD-102 Revision B:1963 | PRESERVATION, PACKAGING, AND PACKING LEVELS (S/S BY MIL-P-116 AND MIL-STD-2073) |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
| ASTM D 362 : 1984 | Specification for Industrial Grade Toluene (Withdrawn 1989) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.