TT-P-1757 Revision B:1997
Current
Current
The latest, up-to-date edition.
PRIMER COATING, ALKYD BASE, ONE COMPONENT
Available format(s)
PDF
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies a corrosion inhibiting primer for spray application with low moisture sensitivity, recommended for use under air pollution regulations
| Committee |
FSC 8010
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SAE AMS 3110 : 2013 | Similar to |
| MIL-A-43820 Revision B:1981 | AIR LOCK, (MUST) |
| MIL-I-85889 Base Document:1988 | IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL-E-16400 Revision H:1987 | ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
| MIL-DTL-18492 Revision B:2011 | TANKS, CARTRIDGE, POWDER, ROCKET, AND COMPONENTS (ALUMINUM) |
| MIL-S-7124 Revision B:1966 | SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED FOR AIRCRAFT STRUCTURES |
| MIL-DTL-38449 Revision D:2010 | SIGNAL AND SIGNAL/INTERCOMMUNICATION AMPLIFIERS, UNIVERSAL, AERIAL REFUELING |
| MIL-A-22145 Revision C:1992 | ACCELEROMETER GROUP, COUNTING (MS25447 AND MS25448) |
| MIL-P-9388 Revision B:1986 | PUMP, PRESSURE, OIL FREE AIR TYPE MA-2 |
| MIL-T-45309 Revision E:1983 | TANK, COMBAT, FULL TRACKED, 105 MM GUN, M60, M60A1, M601A (RISE) & M60A3 PROCESSING FOR SHIPMENT & STORAGE OF |
| MIL-STD-193 Revision L:1991 | PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS |
| MIL B 5806 : F | BOX, SHIPPING, AND STORAGE, HELICOPTER BLADE |
| NASM 1312-21 : 2004 | FASTENER TEST METHODS METHOD 21 SHEAR JOINT FATIGUE, CONSTANT AMPLITUDE |
| MIL-DTL-14072 Revision F:2013 | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| MIL-PRF-25134 Revision C:1996 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
| AA-R-200 Revision F:1987 | REFRIGERATOR, MECHANICAL, COMMERCIAL, SELF-CONTAINED, REACH-IN AND PASS-THROUGH |
| MIL T 28800 : E | TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL-DTL-32360 Base Document:2010 | STOP LIGHT - TAILLIGHT, VEHICULAR-24 VOLT, SERVICE STOP, SERVICE TAIL, BLACKOUT TAIL |
| MIL-G-81559 Revision C:1984 | Gyroscope Assemblies and Attitude and Directional Reference Instruments for Aircraft, Packaging of |
| MIL-STD-1312-21 Base Document:1985 | FASTENER TEST METHODS, METHOD 21, SHEAR JOINT FATIGUE CONSTANT AMPLITUDE |
| MIL-R-47196 Revision A:1977 | RIVETS, BUCK TYPE, PREPARATION FOR AN INSTALLATION OF |
| MIL-DTL-18295 Revision F:1998 | CHAINS AND FITTINGS FOR FLEET MOORING |
| MIL-R-85880 Base Document:1988 | ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL F 24646 : SUPP 1 | FUSE BOXES, FEEDER DISTRIBUTION, TOTALLY ENCLOSED, 125/25O VOLTS, DIRECT CURRENT, THREE WIRE BUSES, TWO WIRE BRANCHES, O-3O AMPERE MIDGET FUSES, SYMBOLS 6O9, 61O AND 611 |
| MIL-H-9890 Revision E:1988 | HARDWARE, INDIVIDUAL LOAD CARRYING EQUIPMENT: AND HARDWARE, MISCELLANEOUS |
| MIL C 18295 : E | CHAIN AND FITTINGS FOR FLEET MOORINGS |
| MIL-E-52929 Base Document:1977 | ENAMEL, ALKYD, CAMOUFLAGE, FLASH DRY |
| MIL-DTL-62006 Revision C:1998 | COOLER, OIL: TRANSMISSION AND ENGINE |
| MIL-B-18670 Revision A:1976 | BOX, SMALL ARMS AMMUNITION, MARK 1 MOD 0 |
| MIL S 25057 : B | SCREEN SYSTEM, AIR INLET, AIRCRAFT TURBINE ENGINE, GENERAL SPECIFICATION FOR |
| MIL-S-85377 Revision A:1983 | SWITCH, STEPPING, DIRECT CURRENT AIRCRAFT DISPENSER |
| MIL-STD-1516 Revision B:1990 | UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL |
| MIL-S-6150 Revision D:1987 | STARTER, ENGINE, ELECTRICAL, DIRECT CRANKING, AIRCRAFT 28 VOLT DC |
| MIL-S-28633 Revision C:1988 | SHELTER, EQUIPMENT, MULTIPURPOSE |
| MIL-L-45963 Base Document:1974 | LOADER, DELINKING, AIRCRAFT MACHINE GUN, MAU-69A/A |
| MIL-T-704 Revision K:1992 | Treatment and Painting of Material |
| MIL-C-4150 Revision J:1989 | CASE, TRANSIT AND STORAGE, WATERPROOF AND WATER-VAPORPROOF |
| MIL-S-45387 Revision B:1976 | SPRING, TORSION-BAR, SUSPENSION |
| MIL-F-7179 Revision G:1993 | FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM |
| SAE AS 4202 : 2015 | ADAPTER - PORT CONNECTION, RING LOCKED DESIGN, INSTALLATION AND REMOVAL OF 8000 PSI SYSTEMS |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| MIL-P-6808 Revision C:1973 | PRIMER COATING, ZINC CHROMATE, PROCESS FOR APPLICATION OF |
| MIL-K-8662 Revision E:1974 | KNIFE, HUNTING, SHEATHED, SURVIVAL PILOT S |
| TT-R-248 Revision B:1981 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
| MIL-L-3851 Revision E:1991 | LOOP, SLIDE [FOR EQUIPAGE] |
| MIL-S-40626 Revision D:1994 | SIGN KIT, VEHICLE CLASS |
| MIL-DTL-3954 Revision D:2015 | DUMMY LOADS, ELECTRICAL, WAVEGUIDE, GENERAL SPECIFICATION FOR |
| MIL T 6117 : D | TERMINAL, CABLE ASSEMBLIES, SWAGED TYPE |
| MIL-DTL-7034 Revision F:2005 | PULLEYS, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-S-85510 Base Document:1981 | Seats, Helicopter Cabin, Crashworthy, General Specification for |
| MIL-STD-1303 Revision B:1975 | PAINTING OF NAVAL ORDNANCE EQUIPMENT |
| MIL STD 47187 : NOTICE 1 | NUTS, BLIND, PRESS & BLIND RIVET, INSTALLATION OF |
| MIL-C-9897 Revision C:1992 | CRATE, SLOTTED ANGLE, STEEL OR ALUMINUM FOR LIGHTWEIGHT AIRFRAME COMPONENTS AND BULKY ITEMS [FOR MAXIMUM LOADS OF 3000 POUNDS] |
| MIL-DTL-1734 Revision J:2002 | SLIPS, TENT LINE |
| MIL-A-43759 Revision A:1981 | ADAPTERS, AIR LOCK, MUST |
| MIL-E-24572 Revision B:1992 | EXTINGUISHER, FIRE, BROMOTRIFLUOROMETHANE (HALON 13O1) SYSTEMS (FIXED PIPE, PNEUMATICALLY ACTUATED, NAVAL SHIPBOARD USE) |
| MIL-E-52835 Revision A:1977 | ENAMEL, MODIFIED ALKYD, CAMOUFLAGE, LUSTERLESS |
| MIL C 7905 : G | CYLINDERS, STEEL COMPRESSED GAS, NONSHATTERABLE, SEAMLESS 1800 PSI AND 2100 PSI |
| DOD V 24657 : 0 | VALVE, ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC) |
| MIL-B-233 Revision D:1987 | BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE |
| MIL-C-81790 Revision A:1990 | CONNECTORS, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| SAE AS 8662 : 1999 | KNIFE, HUNTING, SHEATHED, SURVIVAL, PILOTS |
| MIL-R-19309 Revision D:2003 | RELAY, SENSITIVE (FOR TORPEDO MARK 37 MOD 2) |
| NASA MSFC SPEC 250 : 1963 | PROTECTIVE FINISHES FOR SPACE VEHICLE STRUCTURES AND ASSOCIATED FLIGHT EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL-B-543 Revision G:1990 | BUCKLE, TONGUELESS AND WEB STRAP |
| MIL-C-11198 Revision K:1984 | CHEST, ICE STORAGE |
| MIL-D-6055 Revision D:1987 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE [CAP FROM 88 TO 510 CUBIC INCHES] |
| MIL-W-36775 Revision A:1979 | WET BULB GLOBE TEMPERATURE KIT |
| MIL L 52962 : 0 | LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS |
| MIL-H-18911 Revision A:1974 | HEAD AND MOTOR, ROCKET, INERT PARTS, PAINTING AND MARKING |
| SAE ARP 4058 : 2017 | GENERAL SPECIFICATION GUIDE FOR MECHANICAL GEARED ROTARY ACTUATORS |
| MIL C 19836 : B | COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD |
| MIL-STD-171 Revision F:2011 | FINISHING OF METAL AND WOOD SURFACES |
| MIL-P-9389 Revision A:1987 | PUMP PRESSURE, OIL AND FREE AIR, TYPE MA AND 3 |
| MIL-DTL-58085 Revision C:2012 | Light, Beacon, Anti-Collision, Aircraft |
| P-C-444 Revision B:1983 | CLEANING COMPOUND, SOLVENT SOLUBLE, GREASE EMULSIFYING |
| MS22064 Revision C:2014 | CLAMP - HOSE |
| MIL W 18445 : D | WINDOWS, NON-ICING, LAMINATED FLAT GLASS, ELECTRICALLY HEATED, WITH CONTROLS |
| MIL P 7034 : D | PULLEY, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT |
| MIL-STD-188-124 Revision B:1992 | GROUNDING BONDING AND SHIELDING FOR COMMON LONG HAUL TACTICAL COMMUNICATION SYSTEMS INCLUDING GROUND BASED COMMUNICATIONS ELECTRONICS FACILITIES & EQUIPMENTS |
| MIL-A-37953 Base Document:1983 | ANESTHESIA APPARATUS, GAS, NITROUS OXIDE |
| MIL-DTL-19834 Revision C:2006 | PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADHESIVE BACKED, GENERAL SPECIFICATION FOR |
| MIL-H-9896 Revision C:1988 | HARDWARE, UNIVERSAL LOAD CARRYING SLING |
| MIL-B-13207 Revision D:1976 | BODY, VAN, VEHICLE-MOUNTED, GENERAL SPECIFICATION FOR |
| MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL-DTL-7905 Revision H:2003 | CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, SEAMLESS, 1800 PSI AND 2100 PSI |
| MIL-STD-403 Revision C:1992 | PREPARATION FOR AND INSTALLATION OF RIVETS AND SCREWS, ROCKET AND MISSILE STRUCTURES |
| MIL-B-2481 Revision E:1973 | BULLS EYES, RIGGING, 5/16 INCH INSIDE DIAMETER |
| SAE AS 1959 : 2012 | INSERT - RING LOCKED, FLUID CONNECTION PORT DESIGN, INSTALLATION AND REMOVAL OF |
| MIL-W-87105 Base Document:1977 | WAVEGUIDE ASSEMBLIES, GENERAL SPECIFICATION FOR |
| SAE AS 22145 : 2012 | ACCELEROMETER GROUP, COUNTING (MS25447 AND MS25448) |
| MIL-P-11268 Revision L:1983 | PART, MATERIALS, AND PROCESSES USED IN ELECTRONIC EQUIPMENT |
| SAE AS 6055 : 2006 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES) |
| MIL-DTL-43695 Revision C:2000 | FRAME SECTIONS, TENT, FRAME TYPE, EXPANDABLE |
| MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| FED-STD-313 Revision D:1996 | MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES |
| DOD-P-15328 Revision D:1978 | PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC) |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ASTM D 1729 : 2016 : REDLINE | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 1200 : 2010 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| TT-S-735 Revision A:1988 | STANDARD TEST FLUIDS, HYDROCARBON |
| MIL-C-8514 Revision C:1967 | COATING, COMPOUND, METAL PRETREATMENT, RESIGN ACID [ASG] |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL T 81772 : B | THINNER, AIRCRAFT COATING |
| ASTM G 26 : 1996 | Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Withdrawn 2000) |
| TT-L-32 Revision A:1969 | LACQUER, CELLULOSE NITRATE, GLOSS, FOR AIRCRAFT USE |
| QQ-A-250-5 Revision F:1971 | ALUMINUM ALLOY ALCLAD 2024, PLATE AND SHEET |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| PPP-P-1892 Base Document:1974 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.