TS 105 175-1 : 2.0.0
Current
Current
The latest, up-to-date edition.
ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); PLASTIC OPTICAL FIBRE SYSTEM SPECIFICATIONS FOR 100 MBIT/S AND 1 GBIT/S
Available format(s)
Hardcopy , PDF
Language(s)
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Intellectual Property Rights
Foreword
Introduction
1 Scope and Purpose
2 References
3 Definitions and abbreviations
4 Requirements for 100 Mbit/s System (Fast Ethernet)
5 Requirements for 1 Gbit/s System
6 Cabling solutions
7 Installation
8 Energy efficiency
9 Integrated Wall Plug
Annex A (informative) - Integrated Wall Plug Form Factor
Annex B (informative) - Bibliography
History
Describes the POF cabling system 100 Mbit/s and 1 Gbit/s for interoperability among different suppliers.
| Committee |
ATTM AT2
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
European Telecommunications Standards Institute
|
| Status |
Current
|
| I.S. EN 50173-4:2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| TS 105 175-1-1 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); PLASTIC OPTICAL FIBRES; PART 1: PLASTIC OPTICAL FIBRE SYSTEM SPECIFICATIONS FOR 100 MBIT/S AND 1 GBIT/S; SUB-PART 1: APPLICATION REQUIREMENTS FOR PHYSICAL LAYER SPECIFICATIONS FOR HIGH-SPEED OPERATIONS OVER PLASTIC OPTICAL FIBRES |
| GR OEU 023 : 1.1.1 | OPERATIONAL ENERGY EFFICIENCY FOR USERS (OEU); PLASTIC OPTICAL FIBER PLUGTESTS TO DETERMINE THE INTEROPERABILITY OF NETWORKING EQUIPMENT MANUFACTURED BY DIFFERENT VENDORS |
| EN 55024 : 2010 AMD 1 2015 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 24:2010/A1:2015) |
| EN 300 019-2-3 : 2.4.1 | ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 2-3: SPECIFICATION OF ENVIRONMENTAL TESTS; STATIONARY USE AT WEATHERPROTECTED LOCATIONS |
| EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 61754-22:2005 | Fibre optic connector interfaces - Part 22: Type F-SMA connector family |
| IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV | Plugs and socket-outlets for household and similar purposes - Part1: General requirements |
| IEEE 802.3-2012 | IEEE Standard for Ethernet |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| IEC 60793-2-40:2015 | Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres |
| ISO/IEC 8802-3:2000 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
| IEEE 802.1Q-2014 | IEEE Standard for Local and metropolitan area networks--Bridges and Bridged Networks |
| IEEE 802.1D-2004 | IEEE Standard for Local and metropolitan area networks: Media Access Control (MAC) Bridges |
| IEC 60754-1:2011 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content |
| IEC 61754-21:2005 | Fibre optic connector interfaces - Part 21: Type SMI connector family for plastic optical fibre |
| IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
| IEEE 802.3Z : 1998 | MEDIA ACCESS CONTROL (MAC) PARAMETERS, PHYSICAL LAYERS, REPEATER AND MANAGEMENT PARAMETERS FOR 1000 MB/S OPERATION (TYPE 1000BASE-X) |
| IEEE 802.3U : 1995 | LOCAL AND METROPOLITAN AREA NETWORKS: SUPPLEMENT TO CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS: MEDIA ACCESS CONTROL (MAC) PARAMETERS, PHYSICAL LAYER, MEDIUM ATTACHMENT UNITS, AND REPEATER FOR 100 MB/S OPERATION, TYPE 100 BASE T (CLAUSE 21-30) |
| EN 55022:2010/AC:2011 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
| IEC 60754-2:2011 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
| IEC 60794-2-40:2008 | Optical fibre cables - Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables |
| IEC 61754-24:2009 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24: Type SC-RJ connector family |
| IEC 61754-20:2012 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20: Type LC connector family |
| IEC 61754-4:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family |
| IEC 61034-2:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements |
| IEC 61034-1:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus |
| IEC 60794-2-41:2008 | Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.