SSPC-SP 5 : 2015
Current
Current
The latest, up-to-date edition.
WHITE METAL BLAST CLEANING
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2015
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Describes the requirements for white metal blast cleaning of uncoated or coated steel surfaces by the use of abrasives.
| DevelopmentNote |
Also numbered as NACE 1. (03/2009)
|
| DocumentType |
Standard
|
| ISBN |
1-57590-323-7
|
| Pages |
10
|
| PublisherName |
The Society for Protective Coatings
|
| Status |
Current
|
| Supersedes |
| MIL-STD-2199 Revision A:2010 | COVERINGS FOR WATERBORNE MAIN PROPULSION SHAFTING ON U.S. NAVAL SURFACE SHIPS AND SUBMARINES |
| MIL-DTL-11732 Revision F:2010 | CYLINDER, COMPRESSED GAS: CHLORINE; DOT 3A480 OR DOT 3AA480, GENERAL SPECIFICATION FOR |
| API 652 : 2014 | LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
| API SPEC 11B CHINESE : 2010 | SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
| MIL-DTL-53072 Revision F:2017 | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM - APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
| SSPC-GUIDE 19 : 2012 | SELECTION OF PROTECTIVE COATINGS FOR USE OVER GALVANIZED SUBSTRATES |
| ASTM A 780/A780M : 2009 | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
| MIL-PRF-32577 Base Document:2017 | Coating System, Nonskid, Metallic Thermal Spray Application |
| NACE 12/AWS C2.23M/SSPC CS- 23 : 2016 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
| NACE 43114 : 2014 | NONVISIBLE CONTAMINANTS ON RAILCAR SURFACES |
| API 17L1 : 2013 | SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| ASTM F 941 : 1999 | Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| NACE 35108 : 0 | ONE HUNDRED MILLIVOLT (MV) CATHODIC POLARIZATION CRITERION |
| NACE 02107 : 0 | COATINGS FOR PROTECTION OF THREADED FASTENERS USED WITH STRUCTURAL STEEL, PIPING, AND EQUIPMENT |
| NACE RP 01 76 : 2003 | CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| NACE SP 02 98 : 2007 | SHEET RUBBER LININGS FOR ABRASION AND CORROSION SERVICE |
| ASTM F 941 : 1999 : R2005 | Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
| CSA Z245.20 SERIES : 2014 | PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE |
| NACE SP 01 91 : 2017 | APPLICATION OF INTERNAL PLASTIC COATINGS FOR OILFIELD TUBULAR GOODS AND ACCESSORIES |
| NASA SSTD 8070 0067 : 2004 | HIGH PRESSURE INDUSTRIAL WATER PIPING 'AG' |
| SSPC-SP 11 : 2012 | POWER-TOOL CLEANING TO BARE METAL |
| MIL-DTL-11733 Revision E:2001 | CYLINDER, COMPRESSED GAS - AMMONIA, WITH VALVE (DOT 4AA480) |
| SSPC-PAINT 29 : 2014 | ZINC DUST PIGMENTED PRIMER, PERFORMANCE-BASED |
| NACE 6G198 : 0 | WET ABRASIVE BLAST CLEANING |
| 17/30313373 DC : 0 | BS ISO 21809-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 11: COATING REPAIRS ON REHABILITATION |
| SSPC-PAINT 24 : 2016 | LATEX EXTERIOR FINISH COAT FOR STEEL SURFACES, PERFORMANCE-BASED |
| NACE 2 : 1994 : R1999 | NEAR-WHITE METAL BLAST CLEANING |
| NACE WJ 1 : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
| API 11B : 2010 | SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
| ASTM D 7602 : 2011 : R2017 | Standard Practice for Installation of Vulcanized Rubber Linings |
| ASTM D 8104 : 2017 | Standard Guide for Determining Coating Qualification Test Data Applicability |
| ASTM F 941 : 1999 : R2013 | Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
| ASTM D 7602 : 2011 | Standard Practice for Installation of Vulcanized Rubber Linings |
| NACE SP 01 08 : 2008 | CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS |
| ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
| API 652 CHINESE : 2014 | LINING OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
| Z259.15-17 | Anchorage connectors |
| NACE 02103 : 0 | LIQUID-APPLIED COATINGS FOR HIGH-TEMPERATURE ATMOSPHERIC SERVICE |
| NACE SP 02 95 : 2008 | APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS |
| NACE 6G186 : 0 | SURFACE PREPARATION OF SOLUBLE SALT CONTAMINATED STEEL SUBSTRATES PRIOR TO COATING |
| NACE SP 02 88:2011 | INSPECTION OF LINING APPLICATION IN STEEL AND CONCRETE EQUIPMENT |
| ASTM D 6943 : 2015 : REDLINE | Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings |
| API 5L9 : 2001 : R2010 | EXTERNAL FUSION BONDED EPOXY COATING OF LINE PIPE |
| SSPC-PS 26.00 : 2016 | Aluminum-Pigmented Epoxy Coating System Materials Standard, Performance-Based; Type I for Use Over Blast Cleaned Steel; Type II for Use Over Hand-Cleaned Steel |
| NACE 12 : 2003 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
| NACE SP 02 87 : 2016 | FIELD MEASUREMENT OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL SURFACES USING A REPLICA TAPE |
| ASTM A 780/A780M : 2009 : R2015 | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
| NACE SP 03 94 : 2013 | APPLICATION, PERFORMANCE, AND QUALITY CONTROL OF PLANT-APPLIED SINGLE-LAYER FUSION-BONDED EPOXY EXTERNAL PIPE COATING |
| API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| NACE 11 : 2003 | THIN-FILM ORGANIC LININGS APPLIED IN NEW CARBON STEEL PROCESS VESSELS |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| NASA STD 5008 : 2011 | PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
| API RP 652 : 2020 | LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
| ASTM G 109 : 2007 : R2013 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
| SSPC-PA GUIDE 13 : 2006 | GUIDE SPECIFICATION FOR APPLICATION OF COATING SYSTEMS WITH ZINC-RICH PRIMERS TO STEEL BRIDGES |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| SSPC-PA 15 : 2013 | MATERIAL AND PREPARATION REQUIREMENTS FOR STEEL TEST PANELS USED TO EVALUATE THE PERFORMANCE OF INDUSTRIAL COATINGS |
| ASTM F 941 : 1999 : R2009 | Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
| API RP 5L9 : 2001 : R2015 | EXTERNAL FUSION BONDED EPOXY COATING OF LINE PIPE |
| NACE RP 01 80 : 2001 | CATHODIC PROTECTION OF PULP AND PAPER MILL EFFLUENT CLARIFIERS |
| NACE WJ 1 CHINESE : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
| SSPC-SP WJ 1 : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
| NACE SP 03 98 : 2015 | RECOMMENDATIONS FOR TRAINING AND QUALIFYING PERSONNEL AS RAIL CAR COATING AND LINING INSPECTORS |
| ACI 351.1R : 2012 | REPORT ON GROUTING BETWEEN FOUNDATIONS AND BASES FOR SUPPORT OF EQUIPMENT & MACHINERY |
| SSPC-GUIDE 15 : 2013 | FIELD METHODS FOR EXTRACTION AND ANALYSIS OF SOLUBLE SALTS ON STEEL AND OTHER NONPOROUS SUBSTRATES |
| ASTM G 109 : 2007 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| CSA S16 : 2014 | DESIGN OF STEEL STRUCTURES |
| API 340 : 1997 | LIQUID RELEASE PREVENTION AND DETECTION MEASURES FOR ABOVEGROUND STORAGE FACILITIES |
| ISO 16961:2015 | Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| AASHTO R 31 : 2009 : R2014 | PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL |
| AASHTO M 300 : 2003 | SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER |
| AWS C2.23M/C2.23 : 2003 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
| NACE 2 : 1994 : R2006 | NEAR-WHITE METAL BLAST CLEANING |
| API 17U : 2015 | RECOMMENDED PRACTICE FOR WET AND DRY THERMAL INSULATION OF SUBSEA FLOWLINES AND EQUIPMENT |
| API 5L9:2001 | EXTERNAL FUSION BONDED EPOXY COATING OF LINE PIPE |
| NACE SP 01 98 : 2016 | CONTROL OF CORROSION UNDER THERMAL INSULATION AND FIREPROOFING MATERIALS - A SYSTEMS APPROACH |
| NACE 35103 : 0 | EXTERNAL STRESS CORROSION CRACKING OF UNDERGROUND PIPELINES |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| NACE 14C296 : 0 | A STATE-OF-THE-ART REPORT ON PROTECTIVE COATINGS FOR MITIGATING CORROSION UNDER INSULATION ON RAIL TANK CARS |
| PIP CTSL1000 : 2017 | APPLICATION OF INTERNAL LININGS |
| SSPC-PAINT 43 : 2012 | DIRECT-TO-METAL ALIPHATIC POLYUREA COATING, PERFORMANCE-BASED |
| PIP CTSL1000 EEDS : 2017 | Electronic Entry Data Sheets for the Application of Internal Linings |
| NACE SP0398:2023 | Recommendations for Training and Qualifying Personnel as Rail Car Coating and Lining Inspectors |
| NACE SP0113:2023 | Pipeline Integrity Management: Methods Selection and Implementation |
| SSPC-CS 23.00 : 2016 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.