SAE MS1004_201710
Current
Current
The latest, up-to-date edition.
Lubricants, Industrial Oils, and Related Products Type H (Hydraulic Fluids) - Specification
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
10-18-2017
Publisher
US$133.34
Excluding Tax where applicable
FOREWORD
1. SCOPE
2. REFERENCES
3. CONCEPT
4. REQUIREMENTS AND TESTING
5. NOTES
Describes minimum performance requirements for industrial lubricants, where tests are available.
| DocumentType |
Standard
|
| Pages |
15
|
| ProductNote |
THIS STANDARD IS NOW STABILIZED
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
See Table 1.
| DIN 51759:1977-09 | TESTING OF LIQUID MINERAL OIL HYDROCARBONS; METHOD OF TEST FOR COPPER CORROSION, COPPER STRIP TEST |
| ASTM D 6973 : 2014 : REDLINE | Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump |
| ISO 3016:1994 | Petroleum products — Determination of pour point |
| IP 71 : 1995 | SECTION 1: PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY - SECTION 2: GLASS CAPILLARY KINEMATIC VISCOMETERS - SPECIFICATIONS AND OPERATING INSTRUCTIONS (TWO PART SET) |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| DIN 51566:1983-12 (Draft) | TESTING OF LUBRICANTS; DETERMINATION OF FOAMING CHARACTERISTICS |
| ASTM D 4951 : 2014 : REDLINE | Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry |
| ASTM D 2422 : 1997 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method |
| ASTM D 2070 : 2017-02 | TEST METHOD FOR THERMAL STABILITY OF HYDRAULIC OILS |
| ASTM D 665 : 2014-11 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
| ISO 4263:1986 | Petroleum products — Inhibited mineral oils — Determination of oxidation characteristics |
| DIN 51569:1978-12 | TESTING OF MINERAL OILS, LIQUID FUELS AND RELATED LIQUIDS; MEASUREMENT OF VISCOSITY USING THE VOGEL-OSSAG VISCOMETER; TEMPERATURE RANGE: -55 TO APPROXIMATELY + 10-DEG C |
| ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
| ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
| IP 334 : 2015 | DETERMINATION OF LOAD CARRYING CAPACITY OF LUBRICANTS - FZG GEAR MACHINE METHOD |
| ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
| IP 166 : 77(R1992) | DETERMINATION OF LOAD-CARRYING CAPACITY OF LUBRICANTS - IAE GEAR MACHINE METHOD |
| ISO 2160:1998 | Petroleum products — Corrosiveness to copper — Copper strip test |
| ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
| BS 2000-226(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - CALCULATION OF VISCOSITY INDEX FROM KINEMATIC VISCOSITY |
| DIN 51389-2:1982-04 | DETERMINATION OF LUBRICANTS; MECHANICAL TESTING OF HYDRAULIC FLUIDS IN THE VANE-CELL-PUMP; METHOD A FOR ANHYDROUS HYDRAULIC FLUIDS |
| ISO 6072:2011 | Rubber — Compatibility between hydraulic fluids and standard elastomeric materials |
| DIN 51561:1978-12 | TESTING OF MINERAL OILS, LIQUID FUELS AND RELATED LIQUIDS; MEASUREMENT OF VISCOSITY USING THE VOGEL-OSSAG VISCOMETER; TEMPERATURE RANGE: APPROXIMATELY 10 TO 150-DEG C |
| ISO 7619:1997 | Rubber — Determination of indentation hardness by means of pocket hardness meters |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ASTM D 5182 : 1997 : EDT 1 | Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method) |
| ASTM D 4289 : 2014-02 | TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS |
| IP 278 : 1972(R1988) | DETERMINATION OF SEAL COMPATIBILITY INDEX OF PETROLEUM OILS |
| DIN 51381:1988-12 | TESTING OF LUBRICATING OILS, GOVERNOR OILS & HYDRAULIC FLUIDS; DETERMINATION OF AIR RELEASE PROPERTIES |
| DIN 51354-2:1990-04 | TESTING OF LUBRICANTS; FZG GEAR TEST RIG; METHOD A/8.3/90 FOR LUBRICATING OILS |
| DIN 53505:2000-08 | TESTING OF RUBBER - SHORE A AND SHORE D HARDNESS TEST |
| IP 15 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT |
| ISO 2909:2002 | Petroleum products — Calculation of viscosity index from kinematic viscosity |
| ASTM D 3427 : 2015 : REDLINE | Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| IP 135 : 2015 | DETERMINATION OF RUST-PREVENTING CHARACTERISTICS OF STEAM-TURBINE OIL IN THE PRESENCE OF WATER |
| ASTM D 943 : 2017-08 | TEST METHOD FOR OXIDATION CHARACTERISTICS OF INHIBITED MINERAL OILS |
| ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) — Classification — Part 4: Family H (Hydraulic systems) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic — Determination of the effect of liquids |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.