SAE MS 1009 : 2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE P PNEUMATIC TOOL OILS - SPECIFICATION
Available format(s)
Hardcopy , PDF
Superseded date
08-27-2020
Superseded by
Language(s)
English
Published date
10-15-2018
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1. SCOPE
2. REFERENCES
3. CONCEPT
4. REQUIREMENTS AND TESTING
5. NOTES
Defines minimum performance requirements for industrial lubricants and provides lubricant suppliers with performance targets for a minimum number of key industrial lubricants.
| Committee |
TC2
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MS 1007 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE G SLIDEWAY LUBRICANTS - SPECIFICATION |
| SAE MS 1002 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE C (GEARS) SPECIFICATION |
| MS 1011 : 2013(s2018) | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS - TYPE X (GREASES) - SPECIFICATION |
| SAE MS 1003-2 : 2004 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification - Addendum(Cancelled Jan 2013) |
| SAE MS 1001 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE A LUBRICANT FOR GENERAL PURPOSE AND TOTAL LOSS SYSTEMS - SPECIFICATION |
| SAE MS 1000 : 2013 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
| SAE MS 1006 : 2018 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE F LUBRICANT FOR SPINDLE BEARINGS, AND ASSOCIATED CLUTCHES - SPECIFICATION |
| SAE MS 1010 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE T TURBINE OILS - SPECIFICATION |
| SAE MS 1003 : 2018 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE D COMPRESSOR OILS - SPECIFICATION |
| ISO 3016:1994 | Petroleum products Determination of pour point |
| SAE MS 1003 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE D COMPRESSOR OILS - SPECIFICATION |
| SAE MS 1008 : 2007 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS TYPE M (METAL REMOVAL FLUIDS) - SPECIFICATION |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| SAE MS 1010 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE T TURBINE OILS - SPECIFICATION |
| SAE MS 1002 : 2010 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE C (GEARS) SPECIFICATION |
| DIN 51566:1983-12 (Draft) | TESTING OF LUBRICANTS; DETERMINATION OF FOAMING CHARACTERISTICS |
| ASTM D 2422 : 1997 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ASTM D 2070 : 2017-02 | TEST METHOD FOR THERMAL STABILITY OF HYDRAULIC OILS |
| ASTM D 665 : 2014-11 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
| ISO 4263:1986 | Petroleum products Inhibited mineral oils Determination of oxidation characteristics |
| DIN 51569:1978-12 | TESTING OF MINERAL OILS, LIQUID FUELS AND RELATED LIQUIDS; MEASUREMENT OF VISCOSITY USING THE VOGEL-OSSAG VISCOMETER; TEMPERATURE RANGE: -55 TO APPROXIMATELY + 10-DEG C |
| ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
| ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
| ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
| SAE MS 1000 : 2013 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| SAE MS 1001 : 2010 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE A LUBRICANT FOR GENERAL PURPOSE AND TOTAL LOSS SYSTEMS - SPECIFICATION |
| SAE MS 1005 : 2010 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION |
| SAE MS 1004 : 2010 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE H (HYDRAULIC FLUIDS) - SPECIFICATION |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| DIN 51561:1978-12 | TESTING OF MINERAL OILS, LIQUID FUELS AND RELATED LIQUIDS; MEASUREMENT OF VISCOSITY USING THE VOGEL-OSSAG VISCOMETER; TEMPERATURE RANGE: APPROXIMATELY 10 TO 150-DEG C |
| ISO 7619:1997 | Rubber Determination of indentation hardness by means of pocket hardness meters |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| DIN 51759-1:1988-01 | TESTING OF LIQUID MINERAL OIL PRODUCTS; METHOD OF TEST FOR COPPER CORROSION; COPPER STRIP TEST |
| ASTM D 91 : 2002 : R2007 | Standard Test Method for Precipitation Number of Lubricating Oils |
| IP 278 : 1972(R1988) | DETERMINATION OF SEAL COMPATIBILITY INDEX OF PETROLEUM OILS |
| DIN 53505:2000-08 | TESTING OF RUBBER - SHORE A AND SHORE D HARDNESS TEST |
| IP 15 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT |
| SAE MS 1007 : 2001 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE G SLIDEWAY LUBRICANTS - SPECIFICATION |
| ISO 2909:2002 | Petroleum products Calculation of viscosity index from kinematic viscosity |
| ISO 6743-0:1981 | Lubricants, industrial oils and related products (class L) — Classification — Part 0: General |
| IP 71 SECTION 1 : 1997 | PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| SAE MS 1006 : 2011 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE F LUBRICANT FOR SPINDLE BEARINGS, AND ASSOCIATED CLUTCHES - SPECIFICATION |
| IP 135 : 2015 | DETERMINATION OF RUST-PREVENTING CHARACTERISTICS OF STEAM-TURBINE OIL IN THE PRESENCE OF WATER |
| ASTM D 943 : 2017-08 | TEST METHOD FOR OXIDATION CHARACTERISTICS OF INHIBITED MINERAL OILS |
| ASTM D 1744 : 2013 | Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.