SAE MA2100
Current
The latest, up-to-date edition.
Hose Assemblies, Metal Medium Pressure, High Temperature, Metric
Hardcopy , PDF
English
08-21-2015
1 SCOPE
2 APPLICABLE DOCUMENTS
3 REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 NOTES
Covers metric medium pressure, high temperature, flexible metal hose assemblies suitable for continuous operation in liquid and pneumatic systems from 55 to 400 degree C, with short duration excursion to 650 degree C, and primarily for use on jet aircraft power plants.
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
SAE International
|
| Status |
Current
|
This specification covers metric medium pressure, high temperature, flexible metal hose assemblies suitable for continuous operation in liquid and pneumatic systems from 55 to 400°C, with short duration excursion to 650°C, and primarily for use on jet aircraft power plants.
| SAE AMS5689F | Steel, Corrosion and Heat Resistant, Wire 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated |
| SAE AMS5645S | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| SAE MA2041B | SLEEVE, COUPLING, FLARELESS, METRIC |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| QQ-P-35 Revision C:1988 | Passivation Treatments for Corrosion-Resistant Steel (S/Sby ASTM-A967or SAE-AMS-QQ-P-35) |
| SAE MA2105A | HOSE ASSEMBLY, METAL, MEDIUM PRESSURE, FLARELESS, WELDED, 45° TO 90° FITTING ENDS, METRIC |
| SAE MA2106B | HOSE ASSEMBLY, METAL, MEDIUM PRESSURE, FLARELESS, WELDED, 90° TO 90° FITTING ENDS, METRIC |
| SAE MA2014A | FITTING END, ACORN FLARELESS DESIGN STANDARD, METRIC |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-T-8808 Revision B:1981 | TUBING, STEEL, CORROSION-RESISTANT (18-8 STABILIZED), AIRCRAFT HYDRAULIC QUALITY (USE SAE-AMS5556 AND SAE-AMS5557) |
| MIL-H-6875 Revision H:1989 | Heat Treatment of Steel, Process for (S/S by SAE-AMS-H-6875) |
| DOD STD 100 : C NOTICE 6 | ENGINEERING DRAWING PRACTICES |
| SAE AS1055D | Fire Testing of Flexible Hose, Tube Assemblies, Coils, Fittings, and Similar System Components |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| SAE ARP908C | Torque Requirements, Installation and Qualification Test, Hose and Tube Fitting |
| SAE MA2095C | FITTING END, 24° CONE, DESIGN STANDARD, METRIC |
| MIL R 5031 : B | ROD AND WIRE, WELDING, CORROSION AND HEAT RESISTING ALLOYS |
| SAE AMS5637H | Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated, Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile Strength |
| SAE AMS5646P | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11Ni - 0.60Cb(Nb) (347) Solution Heat Treated |
| SAE MA2103A | HOSE ASSEMBLY, METAL, MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO 90° FITTING ENDS, METRIC |
| SAE MA2040B | NUT, FLARELESS, METRIC |
| SAE MA2104A | HOSE ASSEMBLY, METAL, MEDIUM PRESSURE, FLARELESS, WELDED, 45° TO 45° FITTING ENDS, METRIC |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES, AND FORGINGS; CORROSION RESISTANT (S/S BY SAE-AMS-QQ-S-763) |
| MIL-W-8611 Revision A:1957 | WELDING, METAL ARC AND GAS, STEELS, AND CORROSION AND HEAT RESISTANT ALLOYS; PROCESS FOR (S/S BY MIL-STD-2219) |
| SAE AMS5639J | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 10Ni Solution Heat Treated |
| MIL-C-5501 Revision G:1989 | Caps and Plugs, Protective, Dust and Moisture Seal, General Specification for (S/S by NAS847) |
| SAE MA2102A | HOSE ASSEMBLY, METAL, MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO 45° FITTING ENDS, METRIC |
| SAE AMS5636F | Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 100 ksi (689 MPa) Tensile Strength |
| SAE AMS5557J | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.