SAE MA 2060 : 2015
Current
The latest, up-to-date edition.
FITTINGS, WELDED, HYDRAULIC, TITANIUM AND CORROSION RESISTANT STEEL, 21 000 KPA, METRIC
Hardcopy , PDF
English
08-21-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 SCOPE
2 REFERENCES
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 NOTES
This aerospace specification defines the requirements for metric weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3A1-2.5V titanium and 21Cr-6Ni-9Mn CRES tubing and associated fittings.
| Committee |
G-3
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| SAE AIR 310 : 2013 | FITTINGS, CATALOG OF FLARED. FLARELESS, PIPE THREADED, PORT, HOSE AND OTHER TYPE TUBE STANDARD CONNECTORS |
| SAE AMS5659S | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br> |
| SAE MA 2061 : 2015 | FITTING END, WELDED, INTEGRAL OFFSET WELD, LIP, DESIGN STANDARD, METRIC |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| SAE MA 2065 : 2015 | FITTING, ADAPTER, EXTERNAL THREAD FLARELESS TO INTEGRAL WELD RING, 21,000 KPA, METRIC |
| SAE MA 2005 : 2015 | TUBE FITTINGS, AEROSPACE FLUID SYSTEMS, SEPARABLE, FOR 24 DEGREE CONE, GENERAL SPECIFICATION, METRIC |
| SAE MA 2014 : 2015 | FITTING END, ACORN FLARELESS, DESIGN STANDARD, METRIC |
| SAE MA 2002 : 2013 | IMPULSE TESTING OF HYDRAULIC HOSE, TUBING AND FITTING ASSEMBLIES |
| MIL-H-6875 Revision H:1989 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| SAE AMS 5656F : 2015 | STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS, 9.0MN - 20CR - 6.5NI - 0.27N, SOLUTION HEAT TREATED |
| SAE AMS 5561 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE MA 2063 : 2015 | TUBE END, WELD, DESIGN STANDARD, METRIC |
| SAE MA 2003 : 2015 | ROTARY FLEXURE TESTING OF HYDRAULIC TUBING JOINTS AND FITTINGS |
| SAE MA 2095 : 2015 | FITTING END, 24 DEGREES CONE, DESIGN STANDARD, METRIC |
| MIL-STD-6866 Base Document:1985 | INSPECTION, LIQUID PENETRANT |
| SAE MA 2069 A : 2015 | FITTING, ELBOW, 90 DEGREES, INTEGRAL WELD RING, 21,000 KPA, METRIC |
| SAE MA 2064 : 2015 | FITTING, SLEEVE, FLARELESS, ACORN TO INTEGRAL WELD RING, 21,000 KPA, METRIC |
| MIL-STD-109 Revision C:1994 | QUALITY ASSURANCE TERMS AND DEFINITIONS |
| AWS A3.0 : 0 | STANDARD WELDING TERMS AND DEFINITIONS - INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
| SAE MA 2062 : 2015 | RING, WELD, 21,000 KPA, CRES, METRIC |
| SAE MA 2040 : 2015 | NUT, FLARELESS, METRIC |
| SAE MA 2070 : 2015 | FITTING, TEE, INTEGRAL WELD RING, 21,000 KPA, METRIC |
| SAE AMS 4944 : 2015 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3.0AL - 2.5V COLD WORKED, STRESS RELIEVED |
| SAE MA 2071 : 2015 | FITTING, CROSS, INTEGRAL WELD RING, 21,000 KPA, METRIC |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| SAE AMS 4928 : 2016 | TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.