SAE J1211_201211
Current
The latest, up-to-date edition.
HANDBOOK FOR ROBUSTNESS VALIDATION OF AUTOMOTIVE ELECTRICAL/ELECTRONIC MODULES
Hardcopy , PDF
English
11-19-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. DEFINITION AND DESCRIPTION OF ROBUSTNESS VALIDATION
5. INFORMATION AND COMMUNICATION FLOW
6. MISSION PROFILE
7. KNOWLEDGE MATRIX FOR SYSTEMIC FAILURES
8. ANALYSIS, MODELING AND SIMULATION (AMS)
9. INTELLIGENT TESTING
10. MANUFACTURING PROCESS ROBUSTNESS AND ITS EVALUATION
11. ROBUSTNESS INDICATOR FIGURE (RIF)
12. NOTES
APPENDIX A - SECTION EXAMPLES
APPENDIX B - PROTOTYPE TEST EXAMPLES
Describes robustness of electrical/electronic modules for use in automotive applications.
| DocumentType |
Revision
|
| Pages |
126
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| SAE J 1850 : 2015 | CLASS B DATA COMMUNICATIONS NETWORK INTERFACE |
| SAE J 2685 : 2014 | POSITIVE TEMPERATURE COEFFICIENT OVERCURRENT PROTECTION DEVICES (PTCS) |
| SAE J994_201409 | ALARM - BACKUP - ELECTRIC LABORATORY PERFORMANCE TESTING |
| SAE J 1879 : 2014 | HANDBOOK FOR ROBUSTNESS VALIDATION OF SEMICONDUCTOR DEVICES IN AUTOMOTIVE APPLICATIONS |
| SAE J 2954 : 2017 | WIRELESS POWER TRANSFER FOR LIGHT-DUTY PLUG-IN/ELECTRIC VEHICLES AND ALIGNMENT METHODOLOGY |
| IEEE 1609.0-2013 | IEEE Guide for Wireless Access in Vehicular Environments (WAVE) - Architecture |
| SAE J3168:2021 | Reliability Physics Analysis of Electrical, Electronic, and Electromechanical Equipment, Modules and Components |
| EN 303 980 : 1.1.1 | SATELLITE EARTH STATIONS AND SYSTEMS (SES); HARMONISED STANDARD FOR FIXED AND IN-MOTION EARTH STATIONS COMMUNICATING WITH NON-GEOSTATIONARY SATELLITE SYSTEMS (NEST) IN THE 11 GHZ TO 14 GHZ FREQUENCY BANDS COVERING ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU |
| 16/30320025 DC : 0 | BS ISO 26262-1 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 1: VOCABULARY |
| SAE J 1625 : 2004 | HEAVY-DUTY CIRCUIT BREAKERS |
| SAE AS 5116 : 2003 | MINIMUM OPERATIONAL PERFORMANCE SPECIFICATION FOR GROUND ICE DETECTION SYSTEMS |
| SAE J 2628 : 2013 | CHARACTERIZATION, CONDUCTED IMMUNITY |
| CSA Z617 : 2006 : R2011 | PERSONAL PROTECTIVE EQUIPMENT (PPE) FOR BLUNT TRAUMA |
| CSA Z617 : 2006 | PERSONAL PROTECTIVE EQUIPMENT (PPE) FOR BLUNT TRAUMA |
| SAE J 2848/3 : 2012 | TIRE PRESSURE SYSTEMS - MANAGEMENT (CTIS) TYPE - MEDIUM AND HEAVY DUTY TRUCKS |
| SAE J 2671 : 2004 | REDUCED EFFORT BRAKES AND REDUCED EFFORT VACUUM POWERED BRAKE BACKUP SYSTEMS |
| SAE J 2657 : 2004 | TIRE PRESSURE MONITORING SYSTEMS FOR LIGHT DUTY HIGHWAY VEHICLES |
| SAE J 2357 : 2012 | APPLICATION GUIDELINES FOR ELECTRONICALLY DRIVEN AND/OR CONTROLLED EXTERIOR AUTOMOTIVE LIGHTING EQUIPMENT |
| SAE J 2282 : 2011 | DISTRIBUTED LIGHTING SYSTEMS (DLS) |
| SAE J 1455 : 2017 | RECOMMENDED ENVIRONMENTAL PRACTICES FOR ELECTRONIC EQUIPMENT DESIGN IN HEAVY-DUTY VEHICLE APPLICATIONS |
| SAE J 1938 : 2015 | PRODUCT DEVELOPMENT PROCESS AND CHECKLIST FOR VEHICLE ELECTRONIC SYSTEMS |
| SAE AS 5681 : 2016 | MINIMUM OPERATIONAL PERFORMANCE SPECIFICATION FOR REMOTE ON-GROUND ICE DETECTION SYSTEMS |
| SAE J553 : 2016 | CIRCUIT BREAKERS |
| SAE J3068:2022 | Electric Vehicle Power Transfer System Using a Three-Phase Capable Coupler |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| SAE J 1213/2 : 1988 | GLOSSARY OF RELIABILITY TERMINOLOGY ASSOCIATED WITH AUTOMOTIVE ELECTRONICS |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| SAE J 1879 : 2014 | HANDBOOK FOR ROBUSTNESS VALIDATION OF SEMICONDUCTOR DEVICES IN AUTOMOTIVE APPLICATIONS |
| SAE J 1739 : 2009 | POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN DESIGN (DESIGN FMEA), POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN MANUFACTURING AND ASSEMBLY PROCESSES (PROCESS FMEA) |
| IEC 60300-3-1:2003 | Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology |
| IEC 60300-1:2014 | Dependability management - Part 1: Guidance for management and application |
| IEC 60300-3-9:1995 | Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems |
| ISO 21747:2006 | Statistical methods Process performance and capability statistics for measured quality characteristics |
| SAE J 2628 : 2013 | CHARACTERIZATION, CONDUCTED IMMUNITY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.