SAE J585_201406
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH
Hardcopy , PDF
05-03-2023
English
06-17-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. LIGHTING IDENTIFICATION CODE
5. TESTS
6. REQUIREMENTS
7. GUIDELINES
8. NOTES
Gives test procedures, requirements, and guidelines for tail lamps (rear position lamps) intended for use on vehicles of less than 2032 mm in overall width.
| DocumentType |
Revision
|
| Pages |
10
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE J586_201605 | STOP LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 2358 : 2016 | LOW SPEED VEHICLES |
| MIL-DTL-32360 Base Document:2010 | STOP LIGHT - TAILLIGHT, VEHICULAR-24 VOLT, SERVICE STOP, SERVICE TAIL, BLACKOUT TAIL |
| MIL-STD-1179 Revision E:2011 | LAMPS, REFLECTORS AND ASSOCIATED SIGNALING EQUIPMENT FOR MILITARY VEHICLES |
| SAE J 2319 : 1997 | LOW-SPEED IMPACT BUMPER SYSTEM TEST PROCEDURE FOR PASSENGER VEHICLES |
| MIL-PRF-45316 Revision J:2011 | TRAILER, TANK: POTABLE WATER, 400-GALLON, 2-WHEEL, M149A2 |
| MIL-DTL-32361 Revision A:2011 | COMPOSITE LIGHT, TAIL STOP, TURN AND MARKER |
| ASAE S279.10 : 1998 | LIGHTING AND MARKING OF AGRICULTURAL EQUIPMENT ON HIGHWAYS |
| SAE J 1319 : 2015 | REAR FOG LAMP SYSTEMS |
| SAE AS 8090 : 2016 | MOBILITY, TOWED AEROSPACE GROUND EQUIPMENT, GENERAL REQUIREMENTS FOR |
| CSA M669 : 2017 | LIGHTING AND MARKING OF AGRICULTURAL EQUIPMENT ON HIGHWAYS |
| MIL M 8090 : F | MOBILITY, TOWED AEROSPACE GROUND EQUIPMENT, GENERAL REQUIREMENTS FOR |
| MIL-PRF-32212 Revision A:2009 | LIGHT EMITTING DIODE (LED) COMPOSITE STOP, REAR TURN SIGNAL AND TAIL LAMPS WITH INFRA-RED SECURE BLACKOUT TAIL AND BLACKOUT STOP LAMPS |
| SAE J 2442 : 2015 | HARMONIZED PROVISIONS FOR INSTALLATION OF EXTERIOR LAMPS AND RETRO-REFLECTING DEVICES ON ROAD VEHICLES EXCEPT MOTORCYCLES |
| NGCMA Z135 : 2004 | PERSONAL TRANSPORT VEHICLES - SAFETY AND PERFORMANCE SPECIFICATIONS |
| SAE J 1029 : 2012 | LIGHTING AND MARKING OF CONSTRUCTION, EARTHMOVING MACHINERY |
| SAE J222_201303 | FRONT POSITION LAMP |
| SAE J 99 : 2011 | LIGHTING AND MARKING OF INDUSTRIAL EQUIPMENT ON HIGHWAYS |
| ASAE S279.11 : 2001 | LIGHTING AND MARKING OF AGRICULTURAL EQUIPMENT ON HIGHWAYS |
| SAE J 2258 : 2016 | LIGHT UTILITY VEHICLES |
| SAE J1319:2022 | Rear Fog Lamp System |
| SAE J586_201605 | STOP LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| CFR 49(PTS400-571) : OCT 2017 | TRANSPORTATION |
| SAE J 578 : 2016 | COLOR SPECIFICATION |
| SAE J 1319 : 2015 | REAR FOG LAMP SYSTEMS |
| SAE J 588 : 2011 | TURN SIGNAL LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 1957 : 2011 | CENTER HIGH MOUNTED STOP LAMP STANDARD FOR VEHICLES LESS THAN 2032 MM OVERALL WIDTH |
| SAE J567_201502 | Light Source Retention System<br> |
| SAE J 1889 : 2015 | L.E.D. SIGNAL AND MARKING LIGHTING DEVICES |
| SAE J 2261 : 2016 | STOP LAMPS AND FRONT- AND REAR-TURN SIGNAL LAMPS FOR USE ON MOTOR VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 2042 : 2014 | CLEARANCE, SIDEMARKER, AND IDENTIFICATION LAMPS FOR ON-ROAD VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 575 : 2015 | TEST METHODS AND EQUIPMENT FOR LIGHTING DEVICES FOR USE ON VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J387_201404 | TERMINOLOGY - MOTOR VEHICLE LIGHTING |
| SAE J 759 : 2014 | LIGHTING IDENTIFICATION CODE |
| SAE J594_201002 | REFLEX REFLECTORS |
| SAE J576_201002 | PLASTIC MATERIAL OR MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLEX REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES |
| SAE J 2040 : 2016 | TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.