SAE J 2989 : APR 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HANDLING AND PACKAGING OF MATERIALS AND COMPONENTS FOR EMISSIONS TESTING
Hardcopy , PDF
10-05-2024
English - French
04-05-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. SIMPLIFIED PROCESS OVERVIEW AND TIMELINE
5. SAMPLING THE PRODUCT
6. PREPARATION OF TEST SPECIMEN
7. CONDITIONING OF TEST SPECIMEN
8. PACKAGING
9. LABELING
10. TRANSPORT
11. STORAGE
12. NOTES
Considers materials sensitive to contamination or rapid volatilization of emissions in order to achieve repeatable and accurate test results.
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
This standard is intended for the automotive industry. Testing methods may specifically define the handling and packaging conditions for the material to be analyzed. In these cases, follow the method as closely as possible. Use this standard as a guide, where the protocol for handling and packaging the samples between part production and testing may be undefined.
| ISO 16000-25:2011 | Indoor air Part 25: Determination of the emission of semi-volatile organic compounds by building products Micro-chamber method |
| EN 13999-4:2007+A1:2009 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates |
| ASTM D 7706 : 2017 : REDLINE | Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers |
| VDA 275 : 1994 | Molded parts for vehicle interiors - Determination of formaldehyde release - Measuring method according to the modified bottle method |
| ISO 12219-2:2012 | Interior air of road vehicles — Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Bag method |
| VDA 278 : 2011 | THERMAL DESORPTION ANALYSIS OF ORGANIC EMISSIONS FOR THE CHARACTERIZATION OF NON-METALLIC MATERIALS FOR AUTOMOBILES |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| ISO 12219-3:2012 | Interior air of road vehicles — Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Micro-scale chamber method |
| SAE J 1351 : 2015 | HOT ODOR TEST FOR INSULATION MATERIALS |
| EN 717-3:1996 | Wood-based panels - Determination of formaldehyde release - Part 3: Formaldehyde release by the flask method |
| ISO 12219-4:2013 | Interior air of road vehicles — Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Small chamber method |
| ISO 16000-24:2009 | Indoor air Part 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials |
| VDA 276 : 2005 | DETERMINATION OF ORGANIC SUBSTANCES AS EMITTED FROM AUTOMOTIVE INTERIOR PRODUCTS USING A 1 M[3] TEST CABINET - PART 1: STANDARD-EMISSION |
| VDA 277 : 1995 | NICHTMETALLISCHE WERKSTOFFE DER KFZ-INNENAUSSTATTUNG - BESTIMMUNG DER EMISSION ORGANISCHER VERBINDUNGEN |
| VDA 270 : 2016 | DETERMINATION OF THE ODOUR CHARACTERISTICS OF TRIM MATERIALS IN MOTOR VEHICLES |
| ISO 16000-9:2006 | Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method |
| SAE J 1756 : 2006 | DETERMINATION OF THE FOGGING CHARACTERISTICS OF INTERIOR AUTOMOTIVE MATERIALS |
| ISO 16000-3:2011 | Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method |
| ASTM D 7143 : 2017 : REDLINE | Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products |
| ISO 16000-10:2006 | Indoor air — Part 10: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test cell method |
| ISO 16000-11:2006 | Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens |
| ISO 16000-6:2011 | Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID |
| ISO 12219-5:2014 | Interior air of road vehicles — Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Static chamber method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.