SAE J 2579 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STANDARD FOR FUEL SYSTEMS IN FUEL CELL AND OTHER HYDROGEN VEHICLES
Available format(s)
Hardcopy , PDF
Superseded date
06-22-2019
Superseded by
Language(s)
English
Published date
01-01-2013
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. PERFORMANCE REQUIREMENTS FOR SPECIFIC
TYPES OF HYDROGEN STORAGE AND PROCESSING SYSTEMS
6. NOTES
APPENDIX A - PRESSURE VESSEL TERMINOLOGY GUIDANCE
APPENDIX B - MATERIAL COMPATIBILITY GUIDANCE
FOR HYDROGEN SERVICE INCLUDING COMPRESSED
HYDROGEN STORAGE SYSTEMS
APPENDIX C - COMPRESSED HYDROGEN STORAGE
QUALIFICATION/PERFORMANCE TESTS
APPENDIX D - RATIONALE FOR DESIGN AND QUALIFICATION
REQUIREMENTS OF COMPRESSED HYDROGEN STORAGE
SYSTEMS AS DEFINED IN
APPENDIX E - GUIDANCE FOR THE DESIGN AND SELECTION OF
COMPONENTS FOR HYDROGEN SYSTEMS
APPENDIX F - MATERIAL QUALIFICATION TESTS FOR THE
COMPRESSED HYDROGEN STORAGE SYSTEM (CHSS)
APPENDIX G - GUIDANCE FOR COMPRESSED HYDROGEN SYSTEM INTEGRATION
APPENDIX H - GUIDANCE FOR ESTABLISHING THE STRESS RUPTURE
RESISTANCE OF HIGH PRESSURE CONTAINMENT VESSELS
Describes design, construction, operational, and maintenance requirements for hydrogen fuel storage and handling systems in on-road vehicles.
| DocumentType |
Standard
|
| Pages |
102
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE J 2600 : 2015 | Compressed Hydrogen Surface Vehicle Fueling Connection Devices<br> |
| SAE J 2799 : 2014 | HYDROGEN SURFACE VEHICLE TO STATION COMMUNICATIONS HARDWARE AND SOFTWARE |
| NFPA 502 : 2017 | ROAD TUNNELS, BRIDGES, AND OTHER LIMITED ACCESS HIGHWAYS |
| SAE J 2601-3 : 2013 | FUELING PROTOCOL FOR GASEOUS HYDROGEN POWERED INDUSTRIAL TRUCKS |
| 17/30293100 DC : 0 | BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| SAE AS 6858 : 2017 | INSTALLATION OF FUEL CELL SYSTEMS IN LARGE CIVIL AIRCRAFT |
| SAE J 2578 : 2014 | RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY |
| ANSI HPRD 1 : 2013(R 2018) | THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| SAE J 2929 : 2013 | SAFETY STANDARD FOR ELECTRIC AND HYBRID VEHICLE PROPULSION BATTERY SYSTEMS UTILIZING LITHIUM-BASED RECHARGEABLE CELLS |
| CSA/ANSI HGV 3.1 : 2015 | FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES |
| CSA HGV 3.1 : 2013 | FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES |
| SAE J 2601 : 2016 | FUELING PROTOCOLS FOR LIGHT DUTY GASEOUS HYDROGEN SURFACE VEHICLES |
| CSA NGV 6.1 : 2016 | COMPRESSED NATURAL GAS (CNG) FUEL STORAGE AND DELIVERY SYSTEMS FOR ROAD VEHICLES |
| SAE J 2601/2 : 2014 | FUELING PROTOCOL FOR GASEOUS HYDROGEN POWERED HEAVY DUTY VEHICLES |
| CSA/ANSI HGV 2 : 2014 | COMPRESSED HYDROGEN GAS VEHICLE FUEL CONTAINERS |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| SAE J 1747 : 2013 | RECOMMENDED METHODS FOR CONDUCTING CORROSION TESTS IN HYDROCARBON FUELS OR THEIR SURROGATES AND THEIR MIXTURES WITH OXYGENATED ADDITIVES |
| BS 7886:1997 | Method of measurement of hydrogen permeation and the determination of hydrogen uptake and transport in metals by an electrochemical technique |
| ISO 6469-2:2009 | Electrically propelled road vehicles Safety specifications Part 2: Vehicle operational safety means and protection against failures |
| ISO 23273-1:2006 | Fuel cell road vehicles Safety specifications Part 1: Vehicle functional safety |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| ASTM G 146 : 2001 | Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service |
| CSA 6.5 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| ISO 9587:2007 | Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
| SAE J 1681 : 2000 | GASOLINE, ALCOHOL, AND DIESEL FUEL SURROGATES FOR MATERIALS TESTING |
| NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
| ISO 23273-2:2006 | Fuel cell road vehicles Safety specifications Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen |
| IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
| ANSI/CSA CHMC 1-2014 (R2018) | Test methods for evaluating material compatibility in compressed hydrogen applications - Metals |
| ISO 6469-1:2009 | Electrically propelled road vehicles Safety specifications Part 1: On-board rechargeable energy storage system (RESS) |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| ISO 23273-3:2006 | Fuel cell road vehicles Safety specifications Part 3: Protection of persons against electric shock |
| ISO 15330:1999 | Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method |
| ISO 15724:2001 | Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method |
| ISO/TS 16528:2002 | Boilers and pressure vessels Registration of Codes and Standards to promote international recognition |
| SAE J 2600 : 2015 | Compressed Hydrogen Surface Vehicle Fueling Connection Devices<br> |
| DIN 8572-1:1981-03 | DETERMINATION OF HYDROGEN IN DEPOSITED WELD METAL; MANUAL ARC WELDING WITH COVERED ELECTRODE |
| AWS A4.3 : 1993 | DETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF MARTENSITIC, BAINITIC, AND FERRITIC STEEL WELD METAL PRODUCED BY ARC WELDING |
| CSA HGV 4.4 : 2013(R2018) | STANDARD FOR BREAKAWAY DEVICES FOR COMPRESSED HYDROGEN DISPENSING HOSES AND SYSTEMS |
| ASTM B 849 : 2002 | Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| NSS 1740.16 : 0 | SAFETY STANDARD FOR HYDROGEN AND HYDROGEN SYSTEMS |
| ISO 7539-6:2011 | Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement |
| API 941 : 2016 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
| CSA C108.4 : 2006 | VEHICLES, BOATS, AND INTERNAL COMBUSTION ENGINE DRIVEN DEVICES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF RECEIVERS EXCEPT THOSE INSTALLED IN THE VEHICLE/BOAT/DEVICE ITSELF OR IN ADJACENT VEHICLES/BOATS/DEVICES |
| ISO 9588:2007 | Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
| SAE AMS 2759/9 : 2009 | HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS |
| SAE J 2578 : 2014 | RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY |
| DIN 8572-2:1981-03 | DETERMINATION OF DIFFUSIBLE HYDROGEN IN WELD METAL; SUBMERGED ARC WELDING |
| API 934-A : 2008 | MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE |
| CGA S 1.2 : 2009 | PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| ASTM F 2078 : 2015 : REDLINE | Standard Terminology Relating to Hydrogen Embrittlement Testing |
| SAE J 30 : 2012 | FUEL AND OIL HOSES |
| ISO 3690:2012 | Welding and allied processes Determination of hydrogen content in arc weld metal |
| ISO 6469-3:2011 | Electrically propelled road vehicles Safety specifications Part 3: Protection of persons against electric shock |
| SAE J 2574 : 2011 | FUEL CELL VEHICLE TERMINOLOGY |
| IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
| ISO 2626:1973 | Copper — Hydrogen embrittlement test |
| ASTM F 1624 : 2012-11 | TEST METHOD FOR MEASUREMENT OF HYDROGEN EMBRITTLEMENT THRESHOLD IN STEEL BY THE INCREMENTAL STEP LOADING TECHNIQUE |
| IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
| ASTM F 326 : 1996 | Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes |
| CSA HGV 4.2 : 2013 | HOSES FOR COMPRESSED HYDROGEN FUEL STATIONS, DISPENSERS AND VEHICLE FUEL SYSTEMS |
| IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
| AIAA G 095 : 2004 | GUIDE TO SAFETY OF HYDROGEN AND HYDROGEN SYSTEMS |
| CGA S 1.1 : 2011 | PRESSURE RELIEF DEVICE STANDARDS - PART 1: CYLINDERS FOR COMPRESSED GASES |
| SAE USCAR 5 : 2012 | AVOIDANCE OF HYDROGEN EMBRITTLEMENT OF STEEL |
| SAE AMS 2451/4D : 2017 | PLATING, BRUSH, CADMIUM CORROSION PROTECTIVE, LOW HYDROGEN EMBRITTLEMENT |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.