SAE J 2484 : 2012
Current
The latest, up-to-date edition.
FASTENER PART STANDARD - MACHINE SCREWS
Hardcopy , PDF
English
12-07-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. MACHINE SCREW REQUIREMENTS
5. NOTES
This SAE Part Standard covers selected machine screws manufactured in accordance with American Society for Mechanical Engineers dimensional standards.
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| SAE J 2485 : 2012 | FASTENER PART STANDARD - MACHINE SCREW NUTS (METRIC AND INCH) |
| SAE J 2295 : 2016 | FASTENER PART STANDARD - CAP SCREWS, HEX, HEAVY HEX AND HEAVY HEX STRUCTURAL BOLTS, AND HEX NUTS (INCH DIMENSIONED) |
| SAE AS 1701 : 2017 | LUBRICANT, SOLID FILM |
| SAE AMS 2412 : 2015 | PLATING, SILVER, COPPER STRIKE, LOW BAKE |
| ASTM F 2328M : 2017 : REDLINE | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric) |
| SAE J 2295 : 2016 | FASTENER PART STANDARD - CAP SCREWS, HEX, HEAVY HEX AND HEAVY HEX STRUCTURAL BOLTS, AND HEX NUTS (INCH DIMENSIONED) |
| SAE AMS 2488 : 2000 | ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
| MIL-DTL-16232 Revision G:2000 | PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE |
| ASTM F 593 : 2017 : REDLINE | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| ASTM A 29/A29M : 2016 : REDLINE | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| NAS1283:2014 | FASTENERS, MALE THREADED, SELF-LOCKING |
| SAE J 2270 : 2016 | SHIP SYSTEMS AND EQUIPMENT - THREADED FASTENERS - INSPECTION, TEST, AND INSTALLATION GUIDANCE |
| ASTM A 453/A453M : 2017 : REDLINE | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
| ASTM F 2328 : 2017 : REDLINE | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts |
| SAE J 2280 : 1996 | SHIP SYSTEMS AND EQUIPMENT - FASTENERS - SELECTION AND IDENTIFICATION REQUIREMENTS |
| SAE AMS 2487 : 2000 | ANODIC TREATMENT OF TITANIUM AND TITANIUM ALLOYS SOLUTION PH 12.4 MAXIMUM |
| SAE J 2295M : 2006 | FASTENERS - PART STANDARD - CAP SCREWS, HEX BOLTS, AND HEX NUTS (METRIC) |
| SAE AMS 2485 : 2016 | COATING, BLACK OXIDE |
| ASTM A 342/A342M : 2014 : REDLINE | Standard Test Methods for Permeability of Weakly Magnetic Materials |
| SAE J 2485 : 2012 | FASTENER PART STANDARD - MACHINE SCREW NUTS (METRIC AND INCH) |
| ASME B18.6.3 : 2013 | MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES) |
| ASME B18.18 : 2017 | QUALITY ASSURANCE FOR FASTENERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.