SAE J 2261 : 2016
Current
The latest, up-to-date edition.
STOP LAMPS AND FRONT- AND REAR-TURN SIGNAL LAMPS FOR USE ON MOTOR VEHICLES 2032 MM OR MORE IN OVERALL WIDTH
Hardcopy , PDF
English
07-20-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. LIGHTING IDENTIFICATION CODE
5. TESTS
6. REQUIREMENTS
7. GUIDELINES
8. NOTES
This SAE Standard provides test procedures, requirements, and guidelines for stop lamps and turn signal lamps intended for use on vehicles 2032 mm or more in overall width.
| DocumentType |
Revision
|
| Pages |
10
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| ISO 16154:2005 | Tractors and machinery for agriculture and forestry — Installation of lighting, light signalling and marking devices for travel on public roadways |
| MIL-PRF-45316 Revision J:2011 | TRAILER, TANK: POTABLE WATER, 400-GALLON, 2-WHEEL, M149A2 |
| ASAE S279.10 : 1998 | LIGHTING AND MARKING OF AGRICULTURAL EQUIPMENT ON HIGHWAYS |
| SAE J 2042 : 2014 | CLEARANCE, SIDEMARKER, AND IDENTIFICATION LAMPS FOR ON-ROAD VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| CSA M669 : 2017 | LIGHTING AND MARKING OF AGRICULTURAL EQUIPMENT ON HIGHWAYS |
| SAE J 586 : 2016 | STOP LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 2999 : 2017 | Determination of the Effective Projected Luminous Lens Area (EPLLA) by Design Analysis<br> |
| MIL-PRF-32212 Revision A:2009 | LIGHT EMITTING DIODE (LED) COMPOSITE STOP, REAR TURN SIGNAL AND TAIL LAMPS WITH INFRA-RED SECURE BLACKOUT TAIL AND BLACKOUT STOP LAMPS |
| MIL-PRF-32214 Base Document:2009 | LIGHT EMITTING DIODE (LED) COMPOSITE FRONT PARK AND TURN SIGNAL LAMP, WITH INFRA-RED SECURE FRONT BLACKOUT MARKER LAMP |
| SAE J 2039 : 2014 | SIDE TURN SIGNAL LAMPS FOR LONG VEHICLES |
| SAE J 2442 : 2015 | HARMONIZED PROVISIONS FOR INSTALLATION OF EXTERIOR LAMPS AND RETRO-REFLECTING DEVICES ON ROAD VEHICLES EXCEPT MOTORCYCLES |
| SAE J 1432 : 2016 | REAR HIGH MOUNTED STOP LAMPS AND REAR HIGH MOUNTED TURN SIGNAL LAMPS FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 222 : 2013 | FRONT POSITION LAMP |
| SAE J 585 : 2014 | TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| ASAE S279.11 : 2001 | LIGHTING AND MARKING OF AGRICULTURAL EQUIPMENT ON HIGHWAYS |
| SAE J 586 : 2016 | STOP LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| CFR 49(PTS400-571) : OCT 2017 | TRANSPORTATION |
| SAE J 578 : 2016 | COLOR SPECIFICATION |
| SAE J 588 : 2011 | TURN SIGNAL LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 567 : 2015 | Light Source Retention System<br> |
| SAE J 1889 : 2015 | L.E.D. SIGNAL AND MARKING LIGHTING DEVICES |
| SAE J 2139 : 2014 | TESTS FOR SIGNAL AND MARKING DEVICES USED ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| CFR 49(PTS 300-399) : OCT 2017 | TRANSPORTATION |
| SAE J 1690 : 1996 | FLASHERS |
| SAE J 387 : 2014 | TERMINOLOGY - MOTOR VEHICLE LIGHTING |
| SAE J 759 : 2014 | LIGHTING IDENTIFICATION CODE |
| SAE J 576 : 2010 | PLASTIC MATERIAL OR MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLEX REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.