SAE J 200 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CLASSIFICATION SYSTEM FOR RUBBER MATERIALS
Hardcopy , PDF
04-05-2023
English
06-19-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1. SCOPE
2. REFERENCES
3. TYPE AND CLASS
4. GRADE NUMBERS, SUFFIX LETTERS, AND
NUMBERS
5. COMPOSITION AND MANUFACTURE
6. BASIC REQUIREMENTS
7. SUFFIX REQUIREMENTS
8. LINE CALL-OUTS
9. METHODS OF TEST
10. SAMPLING AND INSPECTION
11. LIMITATIONS OF DOCUMENT IN ESTABLISHING
MATERIAL SPECIFICATIONS
12. NOTES
APPENDIX A - DESIGNATION (TYPE AND CLASS) AND
POLYMER
APPENDIX B - GUIDELINES FOR ESTABLISHING A LINE
CALL-OUT
APPENDIX C - DEVELOPMENT OF AND ADDITIONS TO
THE SAE J200 TABLES
APPENDIX D - SAE J200 AND ASTM D 2000 SPECIFICATION
SYSTEMS
Describes the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications.
| DevelopmentNote |
Supersedes SAE J 14 and ASTM D 735 (03/2004) Also numbered as ASTM D 2000. (07/2017)
|
| DocumentType |
Revision
|
| Pages |
62
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| A-A-52545 Revision B:2009 | HEATERS, VEHICULAR COMPARTMENT 28 VOLT, DC |
| SAE J 2884 : 2014 | THERMOSET ELASTOMER SPECIFICATION SYSTEM |
| NFPA T3.19.25 : 2004 : R2014 | INFORMATION REPORT - FLUID POWER SYSTEMS - SEALING DEVICES - STORAGE, HANDLING AND INSTALLATION OF ELASTOMERIC SEALS AND EXCLUSION DEVICES |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| SAE J 2140 : 2014 | GENERAL REQUIREMENT FOR PREFORMED HOSES FOR AIR INDUCTION ON HEAVY-DUTY ENGINES |
| SAE J 2028 : 2016 | FRONT-WHEEL-DRIVE CONSTANT VELOCITY JOINT BOOT SEALS |
| NFPA T3.19.25 : 2004 | INFORMATION REPORT - FLUID POWER SYSTEMS - SEALING DEVICES - STORAGE, HANDLING AND INSTALLATION OF ELASTOMERIC SEALS AND EXCLUSION DEVICES |
| SAE J 2032 : 2014 | IGNITION CABLE ASSEMBLIES |
| SAE J 515 : 2015 | SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
| SAE J 1183 : 2017 | RECOMMENDED GUIDELINES FOR FATIGUE TESTING OF ELASTOMERIC MATERIALS AND COMPONENTS |
| NFPA T3.19.25 : 2004 : R2009 | INFORMATION REPORT - FLUID POWER SYSTEMS - SEALING DEVICES - STORAGE, HANDLING AND INSTALLATION OF ELASTOMERIC SEALS AND EXCLUSION DEVICES |
| ASTM G 105 : 2016 | Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM D 429 : 2014 : REDLINE | Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| ASTM D 3183 : 201 | PRACTICE FOR RUBBER - PREPARATION OF PIECES FOR TEST PURPOSES FROM PRODUCTS |
| ASTM D 1349 : 2014 : REDLINE | Standard Practice for Rubber—Standard Conditions for Testing |
| SAE J 2979 : 2012 | TEST METHOD FOR VULCANIZED RUBBER AND THERMOPLASTIC ELASTOMER DETERMINATION OF COMPRESSIVE STRESS RELAXATION (CSR) RESPONSE |
| ASTM D 865 : 2011 | Standard Test Method for Rubber<char: emdash>Deterioration by Heating in Air (Test Tube Enclosure) |
| ASTM D 1329 : 2016 : REDLINE | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
| ISO 162:1985 | Cinematography — Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture — Positions and width dimensions |
| ASTM D 925 : 2014 : REDLINE | Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion) |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM D 945 : 2016 : REDLINE | Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph) |
| ASTM D 1418 : 2017 : REDLINE | Standard Practice for Rubber and Rubber Latices—Nomenclature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.