SAE J 1739 : 2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN DESIGN (DESIGN FMEA), POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN MANUFACTURING AND ASSEMBLY PROCESSES (PROCESS FMEA)
Superseded date
01-25-2021
Superseded by
Published date
01-15-2009
Publisher
Sorry this product is not available in your region.
1 Scope-General Information
2 References
3 Potential Failure Mode and Effects Analysis in Design
(Design FMEA)
4 Potential Failure Mode and Effects Analysis in Manufacturing
and Assembly Processes (Process FMEA)
5 Potential Failure Mode and Effects Analysis for Machinery
(Machinery FMEA). An Application of Design FMEA to Plant
Machinery, Tooling, and Equipment
6 Notes
This FMEA Standard describes Potential Failure Mode and Effects Analysis in Design (DFMEA) and Potential Failure Mode and Effects Analysis in Manufacturing and Assembly Processes (PFMEA).
| DocumentType |
Revision
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| SAE USCAR 3 : 2009 | SPECIFICATION FOR TESTING AUTOMOTIVE MINIATURE BULBS |
| SAE J 2888 : 2013 | R-1234YF SERVICE HOSE, FITTINGS AND COUPLERS FOR MOBILE REFRIGERANT SYSTEMS SERVICE EQUIPMENT |
| 16/30320052 DC : 0 | BS ISO 26262-10 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 10: GUIDELINE ON ISO 26262 |
| BS EN 62282-3-100:2012 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| MIL-HDBK-470 Revision A:1997 | Designing and Developing Maintainable Products and Systems, Volume I |
| AWS BRH:2007 | BRAZING HANDBOOK |
| SAE J 2578 : 2014 | RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY |
| MIL-HDBK-896 Revision A:2016 | MANUFACTURING MANAGEMENT PROGRAM GUIDE |
| PREN 9145 : DRAFT 2016 | AEROSPACE SERIES - REQUIREMENTS FOR ADVANCED PRODUCT QUALITY PLANNING AND PRODUCTION PART APPROVAL PROCESS |
| SAE J 1211 : 2012 | HANDBOOK FOR ROBUSTNESS VALIDATION OF AUTOMOTIVE ELECTRICAL/ELECTRONIC MODULES |
| SAE JA 1003 : 2012 | SOFTWARE RELIABILITY PROGRAM IMPLEMENTATION GUIDE |
| ANSI FC 1 : 2012 | STATIONARY FUEL CELL POWER SYSTEMS |
| CSA HPIT 2-2017 | Dispensing systems and components for fueling hydrogen powered industrial trucks |
| SAE J2913:2016 | R-1234yf [HFO-1234yf] Refrigerant Electronic Leak Detectors, Minimum Performance Criteria |
| CSA C22.2 No. 62282-2 : 2007 : R2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| SAE J 2773 : 2017 | STANDARD FOR REFRIGERANT RISK ANALYSIS FOR MOBILE AIR CONDITIONING SYSTEMS |
| 17/30293100 DC : 0 | BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| CNG FUEL INSPECTOR RESOURCE PACKAGE : 2013 | CONSISTS OF ANSI NGV 1-2006/CSA NGV 1-2006, COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES; ANSI PRD 1-2013, PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS; ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS; ANSI NGV 2A-2012, ADDENDA 1 TO ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS AND ANSI NGV 2B-2012 |
| SAE J 2842 : 2015 | R-1234YF AND R744 DESIGN CRITERIA AND CERTIFICATION FOR OEM MOBILE AIR CONDITIONING EVAPORATOR AND SERVICE REPLACEMENTS |
| CSA/ANSI PRD 1 : 2013(R2018) | PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS |
| EN 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| I.S. EN 62282-2:2012 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV)) |
| CEI EN 62282-2 : 2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| SAE AS 9145 : 2016 | AEROSPACE SERIES - REQUIREMENTS FOR ADVANCED PRODUCT QUALITY PLANNING AND PRODUCTION PART APPROVAL PROCESS |
| 15/30327592 DC : 0 | BS EN 9145 - AEROSPACE SERIES - REQUIREMENTS FOR ADVANCED PRODUCT QUALITY PLANNING AND PRODUCTION - PART APPROVAL PROCESS |
| 15/30330450 DC : 0 | BS EN 9138 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| 16/30354071 DC : 0 | BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| 03/118777 DC : DRAFT DEC 2003 | IEC 60812 - ANALYSIS TECHNIQUES FOR SYSTEM RELIABILITY - PROCEDURE FOR FAILURE MODE AND EFFECTS ANALYSIS (FMEA) |
| CEI EN 62282-3-100 : 2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| CSA C22.2 No. 62282-3-100 : 2015 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| PREN 9138 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| SAE ARP 5580 : 2012 | RECOMMENDED FAILURE MODES AND EFFECTS ANALYSIS (FMEA) PRACTICES FOR NON-AUTOMOBILE APPLICATIONS |
| SAE USCAR 27 : 2007 | SPECIFICATION FOR TESTING GAS DISCHARGE LIGHT SOURCE SUBSYSTEM |
| BS EN 60812:2006 | Analysis techniques for system reliability. Procedure for failure mode and effects analysis (FMEA) |
| ANSI HPRD 1 : 2013(R 2018) | THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| SAE J 2929 : 2013 | SAFETY STANDARD FOR ELECTRIC AND HYBRID VEHICLE PROPULSION BATTERY SYSTEMS UTILIZING LITHIUM-BASED RECHARGEABLE CELLS |
| CSA HGV 4.10 : 2012 | STANDARD FOR FITTINGS FOR COMPRESSED HYDROGEN GAS AND HYDROGEN RICH GAS MIXTURES |
| SAE J 2912 : 2014 | PERFORMANCE REQUIREMENTS FOR R-134A AND R-1234YF REFRIGERANT DIAGNOSTIC IDENTIFIERS (RDI) FOR USE WITH MOBILE AIR CONDITIONING SYSTEMS |
| EN 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| GEIA TA HB 0009 : 2013 | RELIABILITY PROGRAM HANDBOOK |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| SAE J 2791 : 2013 | HFC-134A REFRIGERANT ELECTRONIC LEAK DETECTORS, MINIMUM PERFORMANCE CRITERIA |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| SAE J 2886 : 2013 | DESIGN REVIEW BASED ON FAILURE MODES (DRBFM) |
| BS EN 60300-3-1:2004 | Dependability management. Application guide Analysis techniques for dependability. Guide on methodology |
| SAE USCAR 34 : 2009 | SPECIFICATION FOR TESTING AUTOMOTIVE LAMP ASSEMBLIES |
| SAE AS 9138 : 2018 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| I.S. EN 62282-3-100:2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV)) |
| SAE J 2927 : 2017 | R-1234yf Refrigerant Identifier Installed In Recovery and Recycling Equipment for Use With Mobile A/C Systems<br> |
| SAE J 2843 : 2013 | R-1234YF [HFO-1234YF] RECOVERY/RECYCLING/RECHARGING EQUIPMENT FOR FLAMMABLE REFRIGERANTS FOR MOBILE AIR-CONDITIONING SYSTEMS |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| IEC 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| IEC 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| BS EN 62282-2:2012 | Fuel cell technologies Fuel cell modules |
| UNE-EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| IEEE 1725-2011 | IEEE Standard for Rechargeable Batteries for Cellular Telephones |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| 10/30238615 DC : DRAFT NOV 2010 | BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| SAE USCAR 14 : 2006 | SPECIFICATION FOR TESTING AUTOMOTIVE HALOGEN LIGHT SOURCES |
| SAE AS 6500 : 2014 | MANUFACTURING MANAGEMENT PROGRAM |
| CSA C22.2 No. 62282-2 :2007 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| I.S. EN 60812:2006 | ANALYSIS TECHNIQUES FOR SYSTEM RELIABILITY - PROCEDURE FOR FAILURE MODE AND EFFECTS ANALYSIS (FMEA) |
| CSA NGV 6.1 : 2016 | COMPRESSED NATURAL GAS (CNG) FUEL STORAGE AND DELIVERY SYSTEMS FOR ROAD VEHICLES |
| SAE J 2810 : 2016 | HFC-134A (R-134A) REFRIGERANT RECOVERY EQUIPMENT FOR MOBILE AUTOMOTIVE AIR-CONDITIONING SYSTEMS |
| I.S. EN 60300-3-1:2004 | DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY |
| EN 60300-3-1:2004 | Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.