SAE J 1128 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LOW VOLTAGE PRIMARY CABLE
Available format(s)
Hardcopy , PDF
Superseded date
12-14-2020
Superseded by
Language(s)
English
Published date
12-03-2015
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. GENERAL
5. GENERAL SPECIFICATIONS
6. TESTS
7. REFERENCE INFORMATION
8. NOTES
APPENDIX A - FOR INFORMATION ONLY CONDUCTOR
AREA METRIC UNITS
APPENDIX B - RECOMMENDED COLORS
APPENDIX C - SOURCES FOR SAE REFERENCE MATERIALS
Specifies low voltage primary cable intended for use at a nominal system voltage of 60 V DC (25 V AC) or less in surface vehicle electrical systems.
| DocumentType |
Revision
|
| Pages |
24
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE USCAR 33 : 2013 | SPECIFICATION FOR TESTING AUTOMOTIVE LED MODULES |
| KKK-F-2201 Base Document:1986 | FIRE TRUCK, WILDLAND, 4X2, 4X4, GASOLINE OR DIESEL ENGINE, 8,700 POUND TO 32,000 POUND GVWR |
| CAN/CSA-C22.2 NO. 60335-2-72:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE |
| SAE J 821 : 2003 | ELECTRICAL WIRING SYSTEMS FOR CONSTRUCTION, AGRICULTURAL, AND OFF-ROAD MACHINES |
| A-A-52418 Revision A:2010 | LIGHT, WARNING, VEHICULAR: ROTATING UNIT, 14 AND 28 VOLT DC |
| SAE J1292 : 2008(S2016) | AUTOMOBILE AND MOTOR COACH WIRING |
| SAE J 1239 : 2010 | FOUR-, FIVE-, AND EIGHT-CONDUCTOR ELECTRICAL CONNECTORS FOR AUTOMOTIVE TYPE TRAILERS |
| SAE J 2120 : 2009 | PERSONAL WATERCRAFT - ELECTRICAL SYSTEMS |
| CSA D603 : 1988 | DAYTIME RUNNING LIGHT SYSTEMS |
| SAE J 2697 : 2017 | INVERTER REQUIREMENTS FOR CLASS EIGHT TRUCKS - TRUCK AND BUS |
| SAE J 2698 : 2014 | PRIMARY SINGLE PHASE NOMINAL 120 VAC WIRING DISTRIBUTION ASSEMBLY DESIGN - TRUCK AND BUS |
| NFPA 1901:2016 | AUTOMOTIVE FIRE APPARATUS |
| NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
| A-A-52421 Revision A:2010 | ACCESSORY KIT; WARNING DEVICE, DEMOUNTABLE, FOR EMERGENCY VEHICLES |
| SAE J 1939/14 : 2016 | PHYSICAL LAYER, 500 KBPS |
| CSA Z240 MH SERIES : 2016 | MANUFACTURED HOMES |
| SAE J 2174 : 2015 | HEAVY-DUTY WIRING SYSTEMS FOR TRAILERS 2032 MM OR MORE IN WIDTH |
| SAE J 1494 : 2012 | BATTERY BOOSTER CABLES |
| NFPA 414 : 2017 | AIRCRAFT RESCUE AND FIRE-FIGHTING VEHICLES |
| NFPA 1906 : 2016 | WILDLAND FIRE APPARATUS |
| SAE J 2192 : 2016 | RECOMMENDED TESTING METHODS FOR PHYSICAL PROTECTION OF WIRING HARNESSES |
| SAE J 1625 : 2004 | HEAVY-DUTY CIRCUIT BREAKERS |
| SAE J 1654 : 2016 | UNSHIELDED HIGH VOLTAGE PRIMARY CABLE |
| SAE USCAR 29 : 2006 | AUTOMOTIVE GRADE COAXIAL CABLE PERFORMANCE SPECIFICATION |
| SAE J 2202 : 2016 | HEAVY-DUTY WIRING SYSTEMS FOR ON-HIGHWAY TRUCKS |
| SAE J 1294 : 2016 | IGNITION DISTRIBUTORS - MARINE |
| SAE J 1614 : 2012 | WIRING DISTRIBUTION SYSTEMS FOR OFF-ROAD, SELF-PROPELLED WORK MACHINES |
| NFPA 1902 : 1991 | INITIAL ATTACK FIRE APPARATUS |
| CAN/CSA-Z627-16 | Breath alcohol ignition interlock devices |
| UL 60335-2-67:1ED 2017-12-22 | Household and Similar Appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use |
| UL 60335-2-72:1ED 2017-09-15 | Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use |
| KKK-A-1822 Revision E:2002 | STAR-OF-LIFE AMBULANCE |
| A-A-59725 Revision A:2007 | PROTECTOR, AUTOMOTIVE CABLE, HIGH CURRENT, GENERAL REQUIREMENTS FOR |
| CSA C22.2 No. 60335-2-67 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, FOR COMMERCIAL USE |
| SAE J 2394 : 2017 | SEVEN CONDUCTOR CABLE FOR ABS POWER - TRUCK AND BUS |
| SAE J 1939/11 : 2016 | PHYSICAL LAYER, 250 KBPS, TWISTED SHIELDED PAIR |
| SAE J 2549 : 2016 | SINGLE CONDUCTOR CABLE FOR HEAVY-DUTY APPLICATIONS - TRUCK AND BUS |
| SAE J 1678 : 2015 | LOW VOLTAGE ULTRA THIN WALL PRIMARY CABLE |
| SAE J 2891 : 2015 | AUXILIARY POWER UNIT ELECTRICAL INTERFACE REQUIREMENTS FOR CLASS EIGHT TRUCKS |
| NFPA 1917 : 2016 | AUTOMOTIVE AMBULANCES |
| SAE USCAR 21 : 2014 | PERFORMANCE SPECIFICATION FOR CABLE-TO-TERMINAL ELECTRICAL CRIMPS |
| SAE ARP 1247 : 2018 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS |
| SAE J 2577 : 2015 | HEAVY DUTY LAMP ELECTRICAL CONNECTOR STANDARD |
| CSA Z240 MM SERIES : 2016 | |
| SAE J 1067 : 2016 | SEVEN CONDUCTOR CABLE - TRUCK AND BUS |
| NFPA 1904 : 1991 | AERIAL LADDER AND ELEVATING PLATFORM FIRE APPARATUS |
| SAE USCAR 38 : 2009 | PERFORMANCE SPECIFICATION FOR ULTRASONICALLY WELDED WIRE TERMINATIONS |
| CSA Z240 RV SERIES : 2014 | RECREATIONAL VEHICLES |
| KKK-F-2115 Base Document:1985 | FIRE TRUCK (PUMPER), DIESEL ENGINE, 4X2 OR 4X4, 11,000 TO 20,000 POUNDS GVW |
| SAE J 2840 : 2017 | HIGH VOLTAGE SHIELDED AND JACKETED CABLE |
| SAE J 2742 : 2013 | COMBINATION 11 CONDUCTORS AND 2 PAIRS ECBS CABLE |
| SAE J 156 : 2016 | FUSIBLE LINKS |
| SAE J 2863 : 2016 | AUTOMOTIVE TRAILER TOW CONNECTOR |
| SAE J 1939/15 : 2015 | PHYSICAL LAYER, 250 KBPS, UN-SHIELDED TWISTED PAIR (UTP) |
| SAE J 2839 : 2015 | HEAVY DUTY HIGH SPEED DATALINK CONNECTOR |
| SAE J553 : 2016 | CIRCUIT BREAKERS |
| SAE J 1127 : 2015 | LOW VOLTAGE BATTERY CABLE |
| SAE USCAR 2-5 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| SAE ARP 1804 : 2017 | ELECTRIC BAGGAGE/CARGO TRACTOR |
| SAE J 378 : 2018 | MARINE PROPULSION SYSTEM WIRING |
| CSA Z240 VC SERIES : 2014 | |
| CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R201300 | PARK MODEL TRAILERS |
| CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R200800 | PARK MODEL TRAILERS |
| OPEI B71.4 : 2017 | COMMERCIAL TURF CARE EQUIPMENT - SAFETY SPECIFICATIONS |
| OPEI B71.3 : 2014 | SNOW THROWERS - SAFETY SPECIFICATIONS |
| CSA Z241 SERIES : 2003 | PARK MODEL TRAILERS |
| ISO 14572:2011 | Road vehicles — Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables — Test methods and requirements for basic- and high-performance cables |
| SAE J 1678 : 2015 | LOW VOLTAGE ULTRA THIN WALL PRIMARY CABLE |
| SAE J 156 : 2016 | FUSIBLE LINKS |
| SAE J 2183 : 2012 | 60 V AND 600 V SINGLE-CORE CABLES |
| SAE J 2501 : 2012 | ROUND, SCREENED AND UNSCREENED, 60 V AND 600 V MULTI-CORE SHEATHED CABLES |
| SAE J 2840 : 2014 | HIGH VOLTAGE SHIELDED AND JACKETED CABLE |
| ASTM D 5374 : 2013 : REDLINE | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| SAE J 1673 : 2012 | HIGH VOLTAGE AUTOMOTIVE WIRING ASSEMBLY DESIGN |
| ISO 6722:2006 | Road vehicles 60 V and 600 V single-core cables Dimensions, test methods and requirements |
| ASTM D 833 : 1946 : R1955 | Methods of Identification and Quantitative Analysis of Synthetic Elastomers (Withdrawn 1959) |
| SAE J 1654 : 2016 | UNSHIELDED HIGH VOLTAGE PRIMARY CABLE |
| SAE J 1127 : 2015 | LOW VOLTAGE BATTERY CABLE |
| SAE J 311 : 2000 | FLUID FOR PASSENGER CAR TYPE AUTOMATIC TRANSMISSIONS |
| IEC 60811-2-1:1998+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM D 5423 : 2014 | Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.