SAE AS 683 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INSTALLATION PROCEDURES AND TORQUES FOR FLUID CONNECTIONS
Hardcopy , PDF
10-31-2019
English
01-01-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. CONE END CONNECTIONS FOR FLARED TUBE AND BRAZED FERRULE
4. BOSS END CONNECTIONS, POSITIONED TYPE, WITH BACK-UP RING
5. BOSS END CONNECTIONS, POSITIONED TYPE, WITHOUT BACK-UP RING
6. BOSS END CONNECTIONS, NON-POSITIONED TYPE
7. BULKHEAD CONNECTIONS
8. REFERENCE RING SEAL DATA
9. TORQUE VALUES
10. ADAPTERS
11. NOTES
Specifies the following: - Paragraph 3 - Cone end connections for flared tube and brazed ferrule, with and without gasket. - Paragraph 4 - Boss end connections, positioned type, with back-up ring. - Paragraph 5 - Boss end connections, positioned type, without back-up ring. - Paragraph 6 - Boss end connections, non-positioned type. - Paragraph 7 - Bulkhead connections.
| Committee |
E-25
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AIR 5426 : 2013 | FITTING AND FITTING ASSEMBLY SELECTION, INSTALLATION, INSPECTION AND MAINTENANCE OF |
| SAE ARP 994 : 2016 | DESIGN OF TUBING INSTALLATIONS FOR AEROSPACE HYDRAULIC SYSTEMS |
| MS9194 Revision C:2010 | Elbow, Tube - SAE-AMS5646, Boss, 90 Degrees |
| SAE AS 5160 : 2013 | FITTING, BOLT, FLARED |
| SAE AS 4396 : 2013 | FITTING END, BULKHEAD, FLARED TUBE CONNECTION, DESIGN STANDARD |
| SAE AS 3578 : 2012 | PACKING, PREFORMED - O-RING SEAL AMS 7271 |
| SAE AS 5406 : 2015 | FITTING, UNION, TUBE, .375 BULKHEAD |
| MS9095 Revision B:2010 | NIPPLE, TUBE - ALUMINUM, BOSS |
| SAE AS 9058 : 2015 | RING - BACK-UP, BOSS CONNECTION, AMS3652, AMS3656, AMS3660, AMS3667 |
| SAE AS 567 : 2015 | SAFETY CABLE, SAFETY WIRE, KEY WASHERS, AND COTTER PINS FOR PROPULSION SYSTEMS, GENERAL PRACTICES FOR USE OF |
| NAS1149:2014 | WASHER, FLAT |
| SAE AS 9902 : 2010 | PLUG, MACHINE THREAD DRILLED, PREFORMED PACKING, AS8879 THREAD (UNS S34700) |
| SAE AS 930 : 2013 | FITTING END - STRAIGHT THREAD, PORT CONNECTION, DESIGN STANDARD |
| SAE ARP 573 : 2012 | SILVER, COPPER AND NICKEL ALLOY BRAZED JOINTS FOR AEROSPACE PROPULSION SYSTEMS |
| SAE AS 5176 : 2015 | FITTING, SLEEVE, FLARED |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| SAE AMS G 4343 : 2012 | GREASE, PNEUMATIC SYSTEM |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| SAE AMS 7276H : 2011 | RUBBER: FLUOROCARBON (FKM) HIGH-TEMPERATURE-FLUID RESISTANT LOW COMPRESSION SET FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS |
| SAE AS 5161 : 2013 | FITTING, BOLT, FLUID PASSAGE |
| SAE AS 3208 : 1976 | PACKING, PREFORMED - AMS 7276 - SEAL |
| SAE AS 4395 : 2013 | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| SAE AS 3551 : 2012 | PACKING, PREFORMED - O-RING SEAL, AMS 7272 |
| SAE AS 1038 : 2015 | FITTING, ELBOW, 90 DEGREES, STANDARD AND REDUCER, BULKHEAD, FLARED |
| MS9196 Revision C:2015 | TEE, TUBE - SAE-AMS5646, BOSS |
| SAE AS 9385 : 2012 | PACKING, PREFORMED, AMS 7267, 0-RING |
| SAE AS 1039 : 2015 | FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED |
| MS9195 Revision B:2010 | ELBOW, TUBE - SAE-AMS5639, BOSS, 45 DEGREES |
| SAE AS 4330 : 2014 | TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| SAE AS 33583 : 2015 | TUBING END DOUBLE FLARE, STANDARD DIMENSIONS FOR |
| MS9198 Revision D:2010 | NUT, TUBE COUPLING-CRES SAE-AMS5646 |
| SAE AS 3282 : 2014 | GASKET - 37 DEGREES FLARED TUBE FITTING, NICKEL, AMS 5553 |
| VV-P-236 Revision A:1977 | PETROLATUM, TECHNICAL |
| SAE AS 1078 : 2015 | FITTING END, FLARED TUBE CONNECTION, EXTENDED THREAD, DESIGN STANDARD |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AS 9966 : 2012 | PACKING, PREFORMED - AMS 7273, SEAL |
| SAE AS 90991 : 2013 | NUT, HEXAGON, DRILLED, BOSS CONNECTION, ALUMINUM - UNS A92024 |
| MS9953 Base Document:1970 | Plug, Machine Thread - Ams 4121, Preformed Packing Mil-S-8879 Thread |
| MS9954 Base Document:1970 | PLUG MACHINE THREAD DRILLED AMS 4121 PREFORMED PACKING MIL-S-8879 THREAD |
| MS9015 Revision B:1974 | PLUG, MACHINE THREADED "O" RING SEAL |
| SAE AS 92001 : 2011 | NUT, HEXAGON, DRILLED, BOSS CONNECTION, ALUMINIUM - UNS A92014 |
| MS9483 Revision C:2010 | FERRULE, BRAZING, TUBE FITTING - CRES SAE-AMS5646, STRAIGHT |
| SAE AS 9201 : 2007 | NUT, PLAIN, HEXAGON, BOSS CONNECTION, SILVER PLATED, 347 CRES UNS S34700 |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| MS9193 Revision A:2010 | NIPPLE, TUBE - SAE-AMS5639, BOSS |
| SAE AS 5174 : 2015 | FITTING, UNION AND REDUCER, FLARED |
| SAE AS 91001 : 2012 | NUT, HEXAGON, DRILLED, BOSS CONNECTION, CRES - UNS S30400 |
| SAE AS 3074 : 2014 | GASKET - 37 DEGREES FLARED TUBE FITTING, NICKEL, AMS 5553 |
| MS9096 Revision B:1972 | Elbow, Tube - AMS 4135, Boss, 90 DEG. |
| MS9197 Revision D:2010 | Nut, Tube Coupling-CRES SAE-AMS5646, Silver Plate |
| MS9097 Revision A:1962 | Elbow, Tube - AMS 4135, Boss, 45 DEG. |
| SAE AS 5202 : 2005 | PORT OR FITTING END, INTERNAL STRAIGHT THREAD, DESIGN STANDARD |
| SAE AS 5175 : 2017 | NUT, COUPLING, FLARED |
| SAE AS 3075 : 2014 | GASKET - 37 DEGREES FLARED TUBE FITTING, NICKEL, AMS 5553 |
| MS9901 Base Document:1970 | PLUG MACHINE THREAD AMS 5646 PREFORMED PACKING MIL-S-8879 THREAD |
| SAE AS 1171 : 2012 | BOSS - FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.