SAE AS 6129 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INTERFACE STANDARD, AIRBORNE EO/IR SYSTEMS, ELECTRICAL
11-22-2019
01-01-2012
1. SCOPE
2. REFERENCES
3. GENERAL REQUIREMENTS: INTERFACE
CONFIGURATIONS
4. DETAILED REQUIREMENTS
5. NOTES
APPENDIX A - ADDITIONAL INTERFACE REQUIREMENTS
FOR GPS RF SIGNALS
APPENDIX B - RATIONALE DOCUMENTATION
This standard defines a generic set of electrical interfaces between a host aircraft (“platform”) and an electro-optic/infrared (EO/IR) sensor. This includes connectors, cabling, fiber optics, signals, and power
Committee |
AS-1
|
DocumentType |
Standard
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy |
SAE AS 6169A : 2013 | INTERFACE STANDARD, AIRBORNE EO/IR SYSTEMS, MECHANICAL |
SAE AS 6165 : 2012 | INTERFACE STANDARD, AIRBORNE EO/IR SYSTEMS, MAINTENANCE AND TEST |
SAE AS 6135: 2012 | INTERFACE STANDARD, AIRBORNE EO/IR SYSTEMS, DATA |
TIA/EIA 422 : B1994(R2014) | ELECTRICAL CHARACTERISTICS OF BALANCED VOLTAGE DIGITAL INTERFACE CIRCUITS |
MIL-STD-704 Revision F:2004 | AIRCRAFT ELECTRIC POWER CHARACTERISTICS |
MIL-PRF-29504-5 Revision E:2016 | TERMINI, FIBER OPTIC, CONNECTOR, REMOVABLE, ENVIRONMENT RESISTING, SOCKET TERMINUS, SIZE 16, REAR RELEASE, MIL-DTL-38999, SERIES 3 |
MIL-PRF-39012 Revision F:2014 | CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
IEEE 802.3-2012 | IEEE Standard for Ethernet |
MIL-DTL-38999-20 Revision G:2008 | CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, THREADED, WALL MOUNTING FLANGE, REMOVABLE CRIMP CONTACTS, SERIES 3, METRIC |
SAE AS 39029/58 : 2015 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-24308, MIL-DTL-38999 SERIES 1, 2, 3, AND 4, AND MIL-DTL-55302/69 AND MIL-DTL-83733 CONNECTORS) |
ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
SMPTE ST 292-1 : 2012 | 1.5 GB/S SIGNAL/DATA SERIAL INTERFACE |
MIL-DTL-38999-24 Revision J:2011 | CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, THREADED, JAM-NUT MOUNTING, REMOVABLE CRIMP CONTACTS, SERIES 3, METRIC |
SMPTE ST 424 : 2012 | 3 GB/S SIGNAL/DATA SERIAL INTERFACE |
MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
MIL-PRF-29504-4 Revision E:2016 | TERMINI, FIBER OPTIC, CONNECTOR, REMOVABLE, ENVIRONMENT RESISTING, PIN TERMINUS, SIZE 16, REAR RELEASE, MIL-DTL-38999, SERIES 3 |
SAE AS 39029/56 : 2011 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-38999 SERIES 1, 3 AND 4 CONNECTORS) |
SAE AS 85049/80 : 2017 | CONNECTOR ACCESSORIES, ELECTRICAL, DUMMY CONTACT, SIZES 16, 12 AND 8, CATEGORY 7 (FOR MIL-DTL-38999 CONNECTORS) |
SAE AS 39029/75 : 2016 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-DTL-38999 SERIES 1, 3, AND 4 CONNECTORS) |
MIL-STD-1560 Revision C:2015 | INSERT ARRANGEMENTS FOR MIL-DTL-38999, MIL-DTL-27599 AND SAE-AS29600 SERIES A - ELECTRICAL CIRCULAR CONNECTORS |
SAE AS 50881 : 2015 | WIRING AEROSPACE VEHICLE |
SMPTE ST 297-1 : 2015 | SERIAL DIGITAL FIBER TRANSMISSION SYSTEM FOR SMPTE ST 259, SMPTE ST 344, SMPTE ST 292-1/2, SMPTE ST 424, SMPTE ST 2081-1 AND SMPTE ST 2082-1 SIGNALS |
SAE AS 39029/28 : 2016 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-DTL-38999 SERIES 1, 2, 3 AND 4 CONNECTORS) |
MS27488 Revision N:2008 | PLUG, END SEAL, ELECTRICAL CONNECTOR |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.