SAE AS 4842 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION
Available format(s)
Hardcopy , PDF
Superseded date
04-06-2021
Superseded by
Language(s)
English
Published date
01-01-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
APPENDIX A
Sets up the requirements for pipe threaded fluid connection fittings for use in all types of fluid systems.
| Committee |
G-3
|
| DevelopmentNote |
Supersedes AN 933 and MS 27769. (05/2002)
|
| DocumentType |
Revision
|
| Pages |
14
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| AN915 Revision 14:2015 | ELBOW, PIPE, 45 DEGREES |
| AN911 Revision 10:2011 | NIPPLE, PIPE |
| AN912 Revision 10:2011 | BUSHING, PIPE |
| AN916 Revision 11:2011 | ELBOW, PIPE, INTERNAL THREAD. 90 DEGREES |
| MS27769 Revision B:2011 | PLUG, PIPE, COUNTERSUNK HEX HEAD |
| AN914 Revision 11:2012 | ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES |
| SAE AS 4842/1 : 2016 | Fittings, 37° Flared to Pipe Threaded, Fluid Connection |
| NASA SSTD 8070 0126 : 2014 | TUBING SYSTEMS FOR FACILITY SYSTEMS, SPECIAL TEST EQUIPMENT, AND AEROSPACE HARDWARE |
| AN910 Revision 11:2011 | COUPLING, PIPE |
| AN917 Revision 9:2011 | TEE, PIPE |
| SAE AS 4843/2 : 2016 | FITTINGS, BEADED TO PIPE THREADED, FLUID CONNECTION |
| SAE AS 4842/2 : 2016 | FITTINGS, FLARELESS TO PIPE THREADED, FLUID CONNECTION |
| AN918 Revision 9:2011 | CROSS, PIPE |
| SAE AMS 5645 : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE AMS QQ A 225/9 : 2014 | ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED |
| MIL-PRF-6083 Revision G:2013 | HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
| ASTM B 154 : 2016 : REDLINE | Standard Test Method for Mercurous Nitrate Test for Copper Alloys |
| SAE AMS QQ P 416 : 2016 | PLATING, CADMIUM (ELECTRODEPOSITED) |
| SAE AMS 2770 : 2015 | HEAT TREATMENT OF WROUGHT ALUMINUM ALLOY PARTS |
| SAE AMS 6382 : 2014 | STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED |
| SAE AMS 4141 : 2014 | ALUMINUM ALLOY DIE FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 2759 : 2014 | HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AMS 5648 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| SAE AMS 4134 : 2012 | ALUMINUM ALLOY, DIE FORGINGS, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-T4), SOLUTION HEAT TREATED |
| SAE AMS QQ A 367 : 2012 | ALUMINUM ALLOY FORGINGS |
| MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
| SAE AMS 5646 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
| SAE AMS 2772 : 2016 | HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS |
| SAE AS 5201 : 2013 | FITTING END, EXTERNAL TAPER PIPE THREAD, DESIGN STANDARD |
| A-A-59133 Revision B:2010 | CLEANING COMPOUND, HIGH PRESSURE (STEAM) CLEANER |
| SAE AS 1376 : 2013 | ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD |
| SAE AS 71051 : 2015 | PIPE THREADS, TAPER, AERONAUTICAL NATIONAL FORM, SYMBOL ANPT - DESIGN AND INSPECTION STANDARD |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| SAE AMS 2472 : 2014 | ANODIC TREATMENT OF ALUMINUM ALLOYS, SULFURIC ACID PROCESS, DYED COATING |
| SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| SAE AMS 5639 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
| SAE AMS 6370 : 2016 | STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
| SAE AMS 4610 : 2014 | BRASS, FREE-CUTTING BARS AND RODS 61.5CU - 35ZN - 3.1PB HALF HARD (H02) |
| SAE AMS QQ A 225/6 : 1998 | ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED |
| SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| SAE AMS 4339 : 2004 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 4.4CU - 1.5MG - 0.60MN (2024-T-851) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE ARP 4784 : 2013 | DEFINITIONS AND LIMITS, METAL MATERIAL DEFECTS AND SURFACE AND EDGE FEATURES, FLUID COUPLINGS, FITTINGS AND HOSE ENDS |
| SAE AS 478 : 2015 | IDENTIFICATION MARKING METHODS |
| SAE AMS2658D:2016 | HARDNESS AND CONDUCTIVITY INSPECTION OF WROUGHT ALUMINUM ALLOY PARTS |
| SAE ARP 9013 : 2005 | STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| SAE AMS 4124 : 2012 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |
| SAE AS 5200 : 2013 | PORT OR FITTING END, INTERNAL TAPER PIPE THREAD, DESIGN STANDARD |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.