SAE AS4726A
Current
The latest, up-to-date edition.
Nuts, Self-Locking, UNS S66286 Classification: 220 ksi/850 °F Procurement Specification
Hardcopy , PDF
English
02-23-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
APPENDIX A - WRENCH TORQUE TEST
APPENDIX B - PERMANENT SET TEST
APPENDIX C - REUSABILITY TEST AT ROOM TEMPERATURE, AFTER
BAKING
APPENDIX D - REUSABILITY TEST AT ROOM TEMPERATURE, AS
RECEIVED CONDITION
APPENDIX E - 3-CYCLE TEST AT ROOM TEMPERATURE
APPENDIX F - ACCEPTANCE CRITERIA OF SURFACE DISCONTINUITIES
ON SELF-LOCKING NUTS
Defines the requirements for self-locking nuts, wrenching type (i.e., hexagon, double hexagon, and spline drive), made of a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286.
| DocumentType |
Standard
|
| Pages |
32
|
| ProductNote |
This standard is now stabilized
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This specification establishes the requirements for self-locking nuts, wrenching type (i.e., hexagon, double hexagon, and spline drive), made of a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286.
| SAE AS 1701 : 2017 | LUBRICANT, SOLID FILM |
| MIL L 7808 : K (1) | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| SAE AMS 5737 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| QQ-P-35 Revision C:1988 | PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL |
| MIL-W-8982 Revision D:1989 | WRENCHES, SPLINED, HIGH STRENGTH, THIN WALL, GENERAL SPECIFICATION FOR |
| SAE AMS2759/3F | Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts |
| SAE AMS2418J | Plating, Copper |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| MIL-STD-1312-8 Revision A:1984 | FASTENER TEST METHODS - METHOD 8 - TENSILE STRENGTH |
| SAE AS954F | Wrenches, Hand, Twelve Point, High Strength, Thin Wall |
| SAE AMS 5732 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| MIL-S-8879 Revision C:1991 | SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR |
| SAE AMS 5731 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AS7477F | Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification |
| SAE AMS2403M | Plating, Nickel General Purpose |
| SAE AS 1310 : 2012 | FASTENER TORQUE FOR THREADED APPLICATIONS, DEFINITIONS OF |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.