SAE AS 1424 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HOSE ASSEMBLIES, METAL, MEDIUM PRESSURE, HIGH TEMPERATURE
Available format(s)
Hardcopy , PDF
Superseded date
04-11-2020
Superseded by
Language(s)
English
Published date
01-01-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
Specifies medium-pressure, high-temperature, flexible, metal-hose assemblies suitable for operation in pneumatic systems up to 800 degrees F with excursion to 1200 degrees F for Class 'B' and 'N' and primarily for use on jet aircraft power plants.
| Committee |
G-3
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AS 150 : 2017 | HOSE ASSEMBLY, TYPE CLASSIFICATIONS OF, BASIC PERFORMANCE AND FIRE RESISTANCE |
| SAE AMS 5689 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED |
| SAE AMS 5645 : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE ARP 1835 : 2013 | PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES |
| SAE AMS 5663 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5662 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5581 : 2010 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED TUBING, 62NI - 21.5CR - 9.0MO - 3.7CB (NB), ANNEALED |
| NAS1760:2015 | FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| SAE AS 4370 : 2016 | NUT, FITTING, RETAINED |
| SAE AMS 5599 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 62NI - 21.5CR - 9.0MO - 3.7 CB (NB), ANNEALED |
| SAE AMS 5571J:2012(R2018) | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| AN818 Revision 20:2010 | NUT, TUBE COUPLING, SHORT |
| SAE AS 4395 : 2013 | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| MIL-HDBK-831 Revision A:2013 | PREPARATION OF TEST REPORTS |
| SAE AMS 2759 : 2014 | HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS |
| SAE AMS 5832 : 2015 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB(NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED |
| AWS A5.14 : 1989 | NICKEL AND NICKEL-ALLOY BARE WELDING RODS AND ELECTRODES, SPECIFICATION FOR, |
| SAE ARP 908 : 2013 | TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING |
| SAE AS 7003 : 2008 | NADCAP PROGRAM REQUIREMENTS |
| SAE AS 7112 : 1997 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FLUID SYSTEM COMPONENTS |
| SAE AMS 5510S : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE, 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED |
| SAE AMS 5646 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
| SAE AS 85421 : 2015 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR |
| SAE AMS QQ S 763D : 2013(S2015) | STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
| AWS D17.1 : 2001 | SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AMS 5589 : 2013 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C), SOLUTION HEAT TREATED |
| SAE AMS 5570 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE AS 21921 : 2010 | NUT, SLEEVE COUPLING, FLARELESS |
| AWS A5.9 : 93(R1999) | BARE STAINLESS STEEL WELDING ELECTRODES AND RODS, SPECIFICATION FOR |
| SAE AS 4375 : 2013 | FITTING END, FLARELESS, DESIGN STANDARD |
| SAE AMS 5837G : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 62NI - 21.5CR - 9.0MO - 3.7CB(NB) |
| ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| SAE AMS 5666H : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED |
| SAE AMS 5680 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 18.5CR - 11NI - 0.40CB (NB) (SAE 30347) |
| SAE AMS 5556 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED |
| NAS847:2012 | CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL |
| SAE AMS 5557 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.