SAE AMS2700E
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Passivation of Corrosion Resistant Steels
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
11-22-2011
Publisher
Superseded date
03-18-2018
Superseded by
US$139.24
Excluding Tax where applicable
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers the requirements for a process to assure removal of free iron or other less noble contaminants from the surfaces of corrosion resistant steel parts.
| SAE AMS5349E | Steel, Corrosion-Resistant, Investment Castings 13Cr Free Machining; Hardened and Tempered |
| MIL-DTL-32460-3 Base Document:2013 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS Male |
| MIL-DTL-55302-94 Revision F:2010 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Insert (Insulator), Rectangular, Polarized, Removable, Crimp Type Hermaphroditic Contacts (.100 Inch Spacing) |
| SAE AS4468G | Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification |
| MIL-DTL-55302-190 Revision B:2011 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Decade Increments 10 thru 100 Positions, Printed Wiring Boards (.075 Spacing) |
| MIL-DTL-32480-1 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-32372-4 Revision A:2017 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead |
| MIL-DTL-83513-30 Revision B:2009 | Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Straight, Pin Contacts, 4 Row, Solder Type, Standard Profile, 100 Contacts, Printed Circuit Board |
| DSCC 85034 : E | HOLDER, ELECTRICAL CARD, METAL, CARD GUIDE |
| MS51819 Revision E:1987 | Adapter, Straight, Pipe to Tube Male Pipe End, Flareless Type, Hydraulic |
| MIL-DTL-83413-12 Revision A:2015 | Connectors and Assemblies, Electrical, Aircraft Grounding: Grounding Clamp Connector for Types I and III Grounding Assemblies, Stainless Steel Clip, Electrical |
| BS EN 6092:2016 | Aerospace series. Receptacle, floating, double lug |
| MS51510 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee |
| MS51525 Revision B:1988 | Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Steel; Adapter, Straight, Tube to Boss, O-Ring, 37 Degree Flared |
| MS39210 Revision K:2018 | Nuts, Tube Coupling - Safety Sleeve Compression Type |
| MIL-DTL-52471-10 Revision B:2008 | Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100R12 Four-Spiral-Wrap Reinforcement Hose |
| MIL-DTL-52525-35 Revision B:2008 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, 45 Degree Bent Tube |
| MIL-DTL-32480-5 Base Document:2014 | Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
| MS51814 Revision E:1987 | Nipple, Tube,Regular Hex, Flareless Type, Hydraulic |
| MIL-DTL-32371-10 Base Document:2012 | Fittings, Hydraulic Tube, Sleeve, Double Angle |
| MIL-DTL-32371-4 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Spherical on Branch |
| SAE AS4841B | Fittings, 37° Internal Flare, Fluid Connection, Procurement Specification |
| SAE AMS5346C | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H925) 180 ksi (1241 MPa) Tensile Strength (15-5) |
| MIL-DTL-52525-10 Revision D:2011 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight |
| 16/30354034 DC : 0 | BS EN 4854-1 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, NARROW SERIES - DIMENSIONS AND LOADS |
| MIL-DTL-32372-12 Revision A:2017 | Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Male Run to Run |
| MS51519 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Nipple, Tube, Large Hex, for Use with O-Ring |
| DSCC 93007 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 296 CONTACT POSITIONS |
| MIL-DTL-83796-10 Revision A:2014 | Hose Assembly, Rubber, Light Weight, Internal Support Coil, Medium Pressure, Field Attachable End Fittings, Flare to Flare |
| MIL-DTL-55302-163 Revision D:2004 | Connectors, Printed Circuit Subassembly and Accessories, Plug, 72, 84, 96, and 120 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric |
| MIL-DTL-52525-7 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Short Drop |
| AN915 Revision 14:2015 | Elbow, Pipe, 45 Degree |
| MIL-DTL-32464-6 Base Document:2013 | Male Adapted, Union Cross, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI |
| MS39206 Revision G:2012 | Adapters, Straight, Pipe to Tube - Safety Sleeve Compression Type, Male Pipe End |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| MIL-DTL-55302-5 Revision F:2008 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-8783 Revision D:2009 | Clamp, Hose, Flat Band 500 Degrees F, General Specification for |
| MIL-DTL-23971 Revision E:2017 | Power Dividers, Power Combiners, and Power Divider/Combiners, General Specification for |
| MIL-DTL-55302-93 Revision F:2010 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Insert (Insulator), Rectangular, Polarized, Removable Crimp Type, Hermaphroditic Contacts (.100 Inch Spacing) |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| MIL-DTL-55302-90 Revision F:2008 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Right Angle, Hermaphroditic Contact (.100 Inch Spacing) |
| SAE AS4892A | Insert, Screw Thread, Self-Locking, UNS S66286, Locked In, Key Locked Procurement Specification For |
| MIL-DTL-32464-1 Base Document:2013 | Male Adapter, Straight, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-32464-12 Base Document:2013 | Male Adapter, Tee, 37 Degrees Spherical to ANPT, ANPT on Branch, 1500-3000 PSI |
| MS27086 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut |
| MIL-DTL-83796-11 Revision A:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flare, with Lockwire Hole |
| MS27087 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut |
| MIL-DTL-53072 Revision F:2017 | Chemical Agent Resistant Coating (CARC) System Application Procedures and Quality Control Inspection |
| SAE AS5960B | Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems |
| MIL-DTL-83513-32 Revision B:2009 | Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Straight, Socket Contacts, 3 Row, Solder Type, Standard Profile, 51 Contacts, Printed Circuit Board |
| MIL-DTL-45916 Revision C:2014 | Insert, Screw Thread - Thread Cutting and Thread Forming |
| MS35758 Revision D:2012 | Cups, Grease, Manual Feed |
| MIL-DTL-55302-113 Revision F:2006 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Straight-Thru, 30 thru 110 Contact Positions, Crimp Removable Contacts (.100 Sq. Grid) |
| MIL-DTL-83513-13 Revision D:2009 | Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Right Angle, Socket Contacts, 2 Row, Solder Type, Narrow Profile, 9 Through 37 Contacts, Printed Circuit Board |
| MIL-DTL-83503 Revision C:2005 | Connectors, Electrical, Flat Cable, and/or Printed Wiring Board, Nonenvironmental General Specification for |
| MIL-DTL-5002 Revision E:2011 | Surface Treatments and Inorganic Coatings for Metal Surfaces of Weapons Systems |
| MS39199 Revision G:2012 | Nipple, Tube-Safety Sleeve Compression Type, Bulkhead Mounting |
| MS51825 Revision H:2008 | Sleeves, Clinches, Tube Fitting, Flareless Type, Hydraulic |
| MIL-DTL-52525-32 Revision A:2008 | Fittings, Hose, Reinforced Hydraulic Hose and Clamp-Halves: Field Attachable (Reusable), Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube, for use with Type 100RE Four-Spiral-Wrap Reinforcement Hose |
| MS51534 Revision A:1979 | Reducer, Tube, 37 Degrees Flared |
| MS51811 Revision E:1987 | Tee, Tube, Flareless Type Hydraulic |
| MIL-DTL-52525-44 Base Document:2008 | Fittings, Hose, Crimp Type, Split-Flange, 45 Degree Bent Tube |
| MIL-DTL-32480-6 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead |
| MIL-DTL-32372-8 Revision A:2017 | Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
| MIL-DTL-32372-9 Revision A:2017 | Fitting, Adapter, 90 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
| MIL-DTL-613 Revision D:2014 | Grapnels, Marine, Trip Wire, and Crash Truck |
| AN849 Revision 13:2015 | Nipple, Hose |
| AN838 Revision 9:2011 | Elbow, Tube to Hose, 90 Degrees |
| MIL-DTL-52525-1 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight, SAE-J516 Type, for Assembly with SAE-J517, Type 100R2 Hose |
| MS51501 Revision C:2016 | Fittings, Hydraulic, 37 Degree Flared, Short Nipple Tube, Regular Hex |
| MS51528 Revision B:1988 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 45 Degree, O-Ring, 37 Degree Flared |
| MIL-DTL-52525-43 Base Document:2008 | Fittings, Hose, Crimp Type, Split-Flange, Straight |
| MIL-DTL-32372-7 Revision A:2017 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
| MS51816 Revision E:1987 | Adapter, Straight, Pipe to Tube, Female Pipe End, Flareless Type, Hydraulic |
| MIL-DTL-32371-3 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow |
| MIL-DTL-52525-11 Revision C:2008 | Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 45 Degree Bent Tube |
| MS51521 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, 90 Degree Elbow, Swivel |
| MIL-DTL-32372-6 Revision A:2017 | Fitting, Adapter, 90 Degree Male, Hydraulic and Pneumatic, NPTF to ORFS Bulkhead |
| MIL-DTL-83513-27 Revision D:2009 | Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Straight, Socket Contacts, 4 Row, Solder Type, 100 Contacts, Printed Circuit Board |
| MIL-DTL-32371-6 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Nipple Tube, Regular Hex, Long |
| MIL-DTL-23599 Revision C:2017 | Hook, Rescue |
| MIL-DTL-55302-161 Revision D:2004 | Connectors, Printed Circuit Subassembly and Accessories, Receptacle, 160 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric |
| MIL-DTL-83513-33 Revision B:2008 | Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Straight, Socket Contacts, 4 Row, Solder Type, Standard Profile, 100 Contacts, Printed Circuit Board |
| 17/30363748 DC : DRAFT JUL 2017 | BS EN 3660-033 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 033: STAINLESS STEEL BANDING BAND, STYLE Z, FOR ATTACHMENT OF INDIVIDUAL AND/OR OVERALL SCREENS TO CABLE OUTLETS - PRODUCT STANDARD |
| MIL-DTL-32372 Revision A:2016 | Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F |
| MS27077 Revision D:2014 | Flange, Swivel, Retaining |
| 14/30310863 DC : 0 | BS EN 4833 - AEROSPACE SERIES - PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING - FLARED END - INCH SERIES - WITH EXTRA FINE THREAD PITCH |
| AN815 Revision 10:2015 | Union - Flared Tube |
| A-A-55469 Revision B:2015 | Connectors, Electrical, Plugs, Tip (Test Point Plug, Banana Plug) General Requirements for |
| MIL-DTL-85052-14 Base Document:2017 | Clamp, Loop, Stainless Steel, 500 Degrees F, Silicone Rubber, Fabric Reinforced |
| MS51509 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree 45 Degree Elbow, Bulkhead |
| MS51524 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Tube To Swivel, Swivel on Branch |
| MIL-DTL-55302-61 Revision G:2004 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Decade Increments 10 Thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, and 66 for Printed Wiring Boards (.100 Spacing) |
| MS51502 Revision C:2016 | Fittings, Hydraulic, 37 Degree Flared, Long Nipple Tube, Regular Hex |
| MIL-DTL-52525-40 Revision B:2008 | Fittings, Hose, Crimp Type, Split-Flange, Straight |
| MIL-DTL-55302-63 Revision H:2008 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-55302-62 Revision H:2004 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-13220-3 Revision B:2015 | Hook, Slip, Eye |
| MIL-DTL-8878 Revision L:2014 | Turnbuckles, Positive Safetying, General Specification for |
| MS51529 Revision B:1988 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Tee, Tube to Boss, Boss on Branch, O-Ring |
| MIL-DTL-32234-9 Base Document:2007 | Connector, Electrical, Ultra High Density, Modular, Keying Pins and Bushings |
| MS27076 Revision E:2013 | Nipple, Straight, Swivel Flange |
| AN846 Revision 9:2013 | Elbow, Hose, 45 Degree |
| MS51532 Revision B:1988 | Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Steel; Cap, Tube, 37 Degree Flared |
| MIL-DTL-32372-2 Revision A:2017 | Fitting, Adapter, 45 DegreesElbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
| MIL-DTL-32480-7 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MS51520 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Nipple, Bulkhead |
| MIL-DTL-83796-4 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flareless with Lockwire Hole |
| MS9193 Revision A:2010 | Nipple, Tube - SAE-AMS5639, Boss |
| MIL-DTL-52471-1 Revision C:2008 | Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 1001R1, Single-Wire Braided Reinforcement Hose |
| MIL-DTL-13220 Revision G:2015 | Hook, Slip (for use with Wire Rope or Chains) |
| MIL-DTL-52525-6 Revision C:2008 | Fittings,Hose, Screw-on to 37 Degree Flare Female Swivel, 45Degree BentTube |
| MIL-DTL-39030 Revision F:2014 | Dummy Loads, Electrical, Coaxial and Stripline, General Specification for |
| SAE AMS5364C | Steel, Corrosion and Heat-Resistant, Investment Castings 19.5Cr - 10.5Ni - 0.65Cb (CF-8C) Solution Heat Treated |
| MIL-DTL-83798-4 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, Straight |
| MS51507 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Bulkhead, 90 Degree Elbow |
| MS51516 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Bulkhead on Run |
| MS51508 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree 45 Degree Elbow, Male Pipe to Tube |
| MIL-DTL-32371-9 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Bulkhead, Spherical on Run |
| MIL-DTL-52525-36 Revision B:2008 | Fittings, Hose, Crimp Type, Split-Flange 90 Degree Bent Tube |
| MIL-DTL-52525-15 Revision C:2008 | Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 90 Degree Bent Tube |
| PREN 4832 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| DSCC 93012 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS |
| PREN 6094 : 200P2 | AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK |
| PREN 6090 : 200P1 | AEROSPACE SERIES - WASHER, RETAINING |
| SAE ARP994B | Design of Tubing Installations for Aerospace Hydraulic Systems |
| PREN 6093 : 200P1 | AEROSPACE SERIES - RECEPTACLE, FLOATING, SINGLE LUG |
| SAE AS6116A | Aluminum Fittings, Axially Swaged Tube with Flareless Separable, Fluid System Up to 1500 psi (10340 kPa) Maximum, Specification for |
| SAE AS45909A | Stud, Locked In, Ring Locked, Serrated, General Specification For |
| SAE AS7474D | Bolts and Screws, Steel, Corrosion-Resistant, UNS S17400 Tensile Strength 140 ksi Procurement Specification |
| SAE AS4623E | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3,000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems |
| DSCC 84191 : K | EXTRACTOR, ELECTRICAL CARD, METAL |
| SAE AS81820D | Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation |
| SAE AS18280F | Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi |
| SAE AS4108C | T-Bolt and Eye Bolt, A286 CRES, 1000 °F Fatigue Rated |
| 16/30340711 DC : 0 | BS EN 16602-70-14 - SPACE PRODUCT ASSURANCE - CORROSION |
| SAE AS18280/2A | Sleeves, Internally or Externally Swaged or Welded, 24° Cone Flareless Fitting, 3000 psi |
| BS EN 6105:2016 | Aerospace series. Stud with shoulder |
| SAE AS95234A | Connectors, Electrical, Reverse Bayonet, General Specification for |
| MIL-DTL-83513 Revision G:2008 | Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
| MIL-DTL-83513-5 Revision H:2007 | Connectors, Electrical, Rectangular, Microminiature, Mounting Hardware |
| MIL-DTL-27272 Revision D:2015 | Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for |
| MIL-PRF-31031 Revision C:2014 | Connectors, Electrical, Plugs and Receptacles, Coaxial, Radio Frequency, High Reliability, for Flexible and Semirigid Cables, General Specification for |
| MIL-PRF-39012 Revision F:2014 | Connectors, Coaxial, Radio Frequency, General Specification for |
| DEFSTAN 03-2/6(2011) : 2011 | CLEANING AND PREPARATION OF METAL SURFACES |
| MIL-DTL-45952 Revision A:2014 | Pin, Quick-Release, Detent General Specification for |
| MIL-DTL-13791-22 Revision A:2016 | Machine-Pan Head Screw, Cross-Recessed, Carbon Steel, Proper Protected Coating Plated, UNC-2A |
| MIL-DTL-32139 Revision B:2017 | Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
| MIL-DTL-28748 Revision D:2001 | Connector, Plug and Receptacle, Rectangular, Rack and Panel Solder Type and Crimp Type Contacts General Specification for |
| MIL-DTL-781 Revision J:2014 | Terminal, Wire Rope Swaging, General Specification for |
| MIL-STD-1353 Revision C:2014 | Electrical Connectors, Plug-in Sockets and Associated Hardware, Selection and Use of |
| MIL-DTL-32360 Base Document:2010 | Stop Light - Taillight, Vehicular-24 Volt, Service Stop, Service Tail, Blackout Tail |
| OO-K-220 Revision C:2015 | Key, Machine |
| MIL-DTL-22263 Revision C:2009 | Coupling Fuel Line, Flexible, 125 PSI General Specification for |
| MIL-DTL-25579 Revision H:2014 | Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
| A-A-59590 Revision D:2014 | Holder, Electrical Card, Wedge Retainers, 3 Piece, for Cold Plate Applications, General Requirements for |
| MIL-DTL-28748-17 Revision B:2016 | Connectors, Electrical, Rectangular, Rack and Panel, Hardware for |
| A-A-59789 Revision B:2014 | Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, General Requirements for |
| MIL-DTL-55302-92 Revision F:2010 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Straight-thru, Hermaphroditic Contacts (.100 Inch Spacing) |
| MIL-DTL-32460-8 Base Document:2013 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS, Female Swivel |
| 14/30310866 DC : 0 | BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES |
| MS27082 Revision E:2014 | Elbow, Nipple End, Swivel Flange to Hose-90 Degrees |
| MIL-DTL-28840-25 Revision D:2013 | Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, 90 Degree, Metal Conduit for EMI Shielding |
| MIL-DTL-83513-29 Revision B:2009 | Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Straight, Pin Contacts, 3 Row, Solder Type, Standard Profile, 51 Contacts, Printed Circuit Board |
| MIL-DTL-24308-26 Revision M:2015 | Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack and Panel, Screw-Lock Assembly, Female |
| MIL-DTL-28840-30 Revision D:2013 | Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Metal Conduit Coupling |
| AN841 Revision 7:2013 | Adapter - Hose to Flared Tube |
| SAE AMS5366E | Steel, Corrosion and Heat-Resistant, Investment Castings 25Cr - 20Ni (CK-20) As-Cast |
| MIL-DTL-32464-7 Base Document:2013 | Male Adapter, 45 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MS39207 Revision H:2018 | Elbows, Tube - Safety Sleeve Compression Type, 90 Degree |
| MIL-DTL-55302-164 Revision D:2004 | Connectors, Printed Circuit Subassembly and Accessories, Plug and/or Receptacle, 160 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric |
| 10/30227763 DC : 0 | BS EN 6114 - AEROSPACE SERIES - BOLT, COUNTERSUNK HEAD, SHORT THREAD - INCH SERIES |
| SAE AS4875A | Fittings, Straight Threaded Boss or Flanged, Fluid Connection |
| MIL-DTL-83513-25 Revision D:2009 | Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Straight, Socket Contacts, 2 Row, Solder Type, 9 Through 37 Contacts, Printed Circuit Board |
| MIL-DTL-32464-2 Base Document:2013 | Male Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| SAE AS81934B | Bearings, Sleeve, Plain and Flanged, Self-Lubricating |
| MIL-DTL-55302-159 Revision D:2004 | Connectors, Printed Circuit Subassembly and Accessories, Receptacle, 17, 29, 33, 41, 53, and 65 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric |
| MIL-DTL-25427 Revision B:2009 | Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect, General Specification for |
| MIL-DTL-83513-22 Revision D:2009 | Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Straight, Pin Contacts, 2 Row, Solder Type, 9 Through 37 Contacts, Printed Circuit Board |
| SAE ARP5796 | Flight Critical Control Valves, Military Aircraft |
| MIL-DTL-28840-23 Revision D:2013 | Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, Gland Nut, Wiring |
| MIL-DTL-83513-17 Revision D:2009 | Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Right Angle, Pin Contacts, 3 Row, Solder Type, Standard Profile, 51 Contacts, Printed Circuit Board |
| MIL-DTL-32464-4 Base Document:2013 | Male Adapter, Tee, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI |
| MIL-DTL-21097 Revision H:2017 | Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for |
| MIL-DTL-83513-19 Revision D:2009 | Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Right Angle, Socket Contacts, 2 Row, Solder Type, Standard Profile, 9 Through 37 Contacts, Printed Circuit Board |
| MIL-DTL-55302-55 Revision G:2004 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Socket Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-83513-21 Revision D:2009 | Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Right Angle, Socket Contacts, 4 Row, Solder Type, Standard Profile, 100 Contacts, Printed Circuit Board |
| MIL-DTL-83513-24 Revision D:2009 | Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Straight, Pin Contacts, 4 Row, Solder Type, 100 Contacts, Printed Circuit Board |
| MS27072 Revision F:2013 | Wire, Retainer |
| A-A-59950 Base Document:2014 | Holder, Electrical Card, Wedge Retainers, 7 Body, for Cold Plate Applications, General Requirements for |
| MIL-DTL-83798-5 Revision E:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 45 Degrees |
| MIL-DTL-83513-11 Revision D:2009 | Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Right Angle, Pin Contacts, 3 Row, Solder Type, Narrow Profile, 51 Contacts, Printed Circuit Board |
| MIL-DTL-83296 Revision B:2009 | Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for |
| MIL-DTL-55302-31 Revision L:2007 | Connectors, Printed Circuit Subassembly and Accessories: Keying Accessories |
| MIL-DTL-83298 Revision C:2009 | Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 PSI), Hydraulicand Pneumatic |
| MIL-DTL-83513-18 Revision D:2009 | Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Right Angle, Pin Contacts, 4 Row, Solder Type, Standard Profile, 100 Contacts, Printed Circuit Board |
| MIL-DTL-32464-8 Base Document:2013 | Male Adapter, 90 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-39030-5 Revision C:2003 | Dummy Loads, Electrical, Coaxial, Type IV (TNC), Low Power |
| MIL-DTL-39030-3 Revision E:2013 | Dummy Loads, Electrical, Coaxial, Type I (SMA), Low Power |
| AN844 Revision 13:2013 | Elbow - Pipe to Hose, 45 Degree |
| MS18194 Revision E:2012 | Jackscrews, Electrical Connectors Male and Female, Long, Turnable |
| MIL-DTL-13220-2 Revision B:2015 | Hook, Slip, Clevis, with Latch |
| MIL-DTL-83513-23 Revision D:2009 | Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Straight, Pin Contacts, 3 Row, Solder Type, 51 Contacts, Printed Circuit Board |
| MIL-PRF-39012-55 Revision H:2011 | Connectors, Plugs, Electrical, Coaxial, Radio Frequency (Series SMA (Cabled) - Plug, Pin Contact, Class 2) |
| AN807 Revision 7:2007 | Adapter, Straight, Tube to Hose |
| MIL-DTL-83513-26 Revision D:2009 | Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Straight, Socket Contacts, 3 Row, Solder Type, 51 Contacts, Printed Circuit Board |
| MIL-DTL-6001 Revision B:2013 | Fittings; Aircraft, Solder Type, Tube |
| MS9194 Revision C:2010 | Elbow, Tube - SAE-AMS5646, Boss, 90 Degrees |
| MIL-DTL-55302-57 Revision H:2004 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-52525-13 Revision C:2008 | Fittings, Hose, Crimp Type, Split-Flange Straight |
| MIL-DTL-32464 Revision A:2017 | Fittings, Adapter, Hydraulic and Pneumatic, 37 Degrees Spherical to ANPT Connectors, 1500 to 3000 PSI, General Specification for |
| MIL-DTL-32464-10 Base Document:2013 | Male Adapter, Long, Nipple Tube, Hydraulic and Pneumatic Tube, Long Hex, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-83513-10 Revision D:2008 | Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Right Angle, Pin Contacts, 2 Row, Solder Type, Narrow Profile, 9 through 37 Contacts, Printed Circuit Board |
| MIL-DTL-32371 Base Document:2012 | Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
| PREN 6092 : 200P2 | AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
| PREN 6089 : 200P2 | AEROSPACE SERIES - WASHER, RETAINING, FOR USAGE WITH STUD EN 6088 |
| MIL-DTL-28754 Revision E:2016 | Connectors, Electrical, Modular, and Component Parts General Specification for |
| MIL-DTL-32460-7 Base Document:2013 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS, Female Swivel |
| MIL-DTL-32460-5 Base Document:2013 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS Bulkhead |
| SAE AS85052A | Clamp Assembly, Loop Type, Cushioned, General Specification For |
| MIL-DTL-32464-5 Base Document:2013 | Male, Adapter, Nipple Tube, Hydraulic and Pneumatic, Regular Hex, 37 Degrees Spherical to NPTF, 1500-3000 PSI |
| SAE AS620G | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft |
| I.S. EN 6105:2016 | AEROSPACE SERIES - STUD WITH SHOULDER |
| SAE AS5958F | Fittings, Axially Swaged Tube with Flareless Separable, Fluid System for Operating Pressures up to and Including 5080 psi (35000 kPa), Specification for |
| SAE AS39901B | Bearings, Roller, Needle, Airframe, Antifriction, Inch |
| I.S. EN 6090:2016 | AEROSPACE SERIES - WASHER, RETAINING |
| SAE AMS5347B | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (15-5) |
| SAE AS1975G | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| SAE AMS5342E | Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4) |
| SAE AS85449A | Clamp Assembly, Saddle Type, Cushioned, General Specification For |
| MIL-DTL-45932 Revision A:2015 | Insert, Screw Thread, Thin Wall, Locked in: General Specification for |
| SAE AS82819 | Bearings, Plain, Self-Aligning, Self-Lubricating, 300 cpm Oscillation (13 fpm), -65 to +160 °F (-54 to +71 °C), Liners Less Than 0.015 inches |
| MIL-DTL-13444 Revision H:2006 | Hose and Hose Assemblies, Rubber: Fuel and Oil |
| MIL-DTL-26633 Revision F:2014 | Hose Assembly, Nonconductive, Polytetrafluoroethylene, Oxygen |
| MIL-DTL-55302-7 Revision E:2006 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Right-Angle, for Multilayered Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-52525-5 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight |
| MIL-DTL-52525-34 Revision B:2008 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight |
| MIL-DTL-52525-2 Revision C:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube |
| MIL-DTL-18866 Revision J:2015 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for |
| MS39202 Revision G:2012 | Elbows, Pipe to Tube - Safety Sleeve Compression Type, 90 Degree, Male Pipe End |
| MS39201 Revision G:2012 | Nipple, Tube-Safety Sleeve Compression Type |
| MS27075 Revision D:2013 | Nipple, Flared, Tube to Hose - Swivel Nut |
| MS27071 Revision D:2013 | Union, Nipple |
| MS27625 Revision D:2018 | Wire, Retainer |
| SAE AS18280/1C | Sleeve, Bite Type, 24° Cone Flareless Fitting, 3000 psi |
| MS27070 Revision E:2013 | Sleeve, Hose Coupling |
| MIL-DTL-19068 Revision B:2006 | VALVES, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 2 SYSTEMS |
| MS20762 Revision D:2016 | Elbow, Flared Tube, Flanged, Swivel, 90 Degree |
| MIL-DTL-32460-1 Base Document:2013 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS Male |
| DSCC 93006 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 296 CONTACT, 2 POWER POSITIONS |
| MIL-DTL-55181-4 Revision D:2008 | Connector, Receptacle, Electrical, Panel Mount, Waterproof, 4 Socket Contacts, 35 AMP |
| MS18195 Revision C:2012 | Jackscrews, Electrical Connectors Male and Female, Short Turnable |
| MIL-PRF-55339 Revision C:2005 | Adapters, Connectors, Coaxial, Radio Frequency, (Between Series and within Series), General Specification for |
| MIL-DTL-55302-89 Revision E:2006 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Right Angle, Hermaphroditic Contacts (.100 Spacing) |
| AN842 Revision 13:2013 | Elbow - Pipe to Hose, 90 Degrees |
| MS39324 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Adapter to 45 Degree O-Ring Boss |
| MIL-DTL-55302-182 Revision C:2008 | Connectors, Printed Circuit Subassembly and Accessories: Guide Pins, Jackscrews and Mounting Ears |
| MIL-DTL-32234 Base Document:2007 | Connectors, Electrical, Ultra High Density, Modular, Blade and Fork, Eight Row, General Specification for |
| MIL-DTL-38999-28 Revision H:2015 | Connectors, Electrical, Circular, Nut, Hexagon, Connector Mounting, Series III and IV, Metric |
| MIL-DTL-83513-31 Revision B:2009 | Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Straight, Socket Contacts, 2 Row, Solder Type, Standard Profile, 9 through 37 Contacts, Printed Circuit Board |
| MIL-DTL-55302-162 Revision D:2004 | Connectors, Printed Circuit Subassembly and Accessories, Plug, 17, 29, 33, 41, 53, and 65 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric |
| MS51842 Revision E:2017 | Fittings, Hydraulic Tube, Flareless Type, 45 Degree Elbow, Tube To Boss, O-Ring |
| MS18205 Revision C:2013 | Pin, Straight Headed |
| BS EN 6090:2016 | Aerospace series. Washer, retaining |
| DSCC 93004 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS |
| 10/30227764 DC : 0 | BS EN 6115 - AEROSPACE SERIES - BOLT - PROTRUDING HEAD, SHORT THREAD - INCH SERIES |
| DSCC 93013 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS, WITH SAFETY GROUND |
| SAE AMS5344F | Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H900) 180 ksi (1241 MPa) Tensile Strength (17-4) |
| MIL-DTL-32460-6 Base Document:2013 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS Bulkhead |
| MIL-DTL-32460 Revision A:2017 | Adapter, Hydraulic andPneumatic, 37 Degree Flare Tube Fitting to O-Ring Face Seal Connectors, 1500 to 3000 PSI and -65 DegreeF to250 Degree F, General Specification for |
| MIL-DTL-83796-1 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flare |
| MIL-DTL-83798 Revision D:2008 | Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification For |
| MIL-DTL-8795 Revision G:2014 | Hose Assemblies, Elastomeric, Hydraulic, Fuel, Coolant, and Oil Resistant, General Specification for |
| MIL-DTL-55302-96 Revision F:2008 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Wrappost (Removable) Hermaphroditic Contacts (.100 Inch Spacing) |
| A-A-55563 Revision D:2013 | Holder, Electrical Card, Metal Card Guide, General Requirements for |
| MIL-DTL-52525-38 Revision B:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube |
| SAE AS4459B | Fittings, Tube, Fluid System 3000 psig (21 000 kPa) Rated Pressure, Externally Swaged, Specification For |
| MIL-DTL-83513-16 Revision D:2009 | Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Right Angle, Pin Contacts, 2 Row, Solder Type, Standard Profile, 9 Through 37 Contacts, Printed Circuit Board |
| MIL-DTL-5675 Revision C:2005 | Shackle: Cable, Aircraft |
| MIL-DTL-28840-15 Revision E:2013 | Connectors, Accessories, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Protective Cover, Plug |
| MIL-DTL-55302-160 Revision D:2004 | Connectors, Printed Circuit Subassembly and Accessories, Receptacle, 72, 84, 96, and 120 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric |
| MS51522 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, 45 Degree Elbow, Swivel |
| MIL-DTL-83796-13 Base Document:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless, with Lockwire Hole |
| MS51512 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Tube to Male Pipe on Branch |
| MIL-DTL-52525-3 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Short Drop |
| MIL-DTL-85052-12 Base Document:2017 | Clamp, Loop, Stainless Steel, 400 Degrees F, Fluorosilicone |
| MS51531 Revision B:1985 | Nut, Tube Coupling, 37 Degree Flared |
| MS39322 Revision B:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Adapter, Female Swivel to Weld Socket, 3/4 Inch to 1 Inch |
| MIL-DTL-55116 Revision D:2013 | Connectors: Miniature Audio, Five-Pin and Six-Pin General Specification for |
| MIL-DTL-32464-11 Base Document:2013 | Male Adapter, Bulkhead, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| 14/30310862 DC : 0 | BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| MIL-PRF-39012-79 Revision G:2008 | Connectors, Plug, Electrical, Coaxial, Radio Frequency, Series SMA (Cabled) Pin Contact, Class 2, Semirigid Cable |
| MIL-DTL-27235 Revision B:2014 | Pin, Straight, Headed (Clevis Pins) |
| SAE AMS03_2A | Cleaning and Preparation of Metal Surfaces |
| MIL-DTL-55302-4 Revision F:2008 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Right-Angle, for Multilayered Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-83513-14 Revision D:2009 | Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Right Angle, Socket Contacts, 3 Row, Solder Type, Narrow Profile, 51 Contacts, Printed Circuit Board |
| MS9769 Revision B:2008 | Reducer, Tube - Straight, Tube to Boss |
| MIL-DTL-55302-56 Revision H:2004 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Pin Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-85052-11 Base Document:2017 | Clamp, Loop, Stainless Steel, 275 Degrees F, Side Lock, Ethylene Propylene |
| MS51533 Revision A:1979 | Fittings, Hydraulic Tube, Flared 37 Degree, Sleeve, Compression, Tube Fitting |
| MS51526 Revision A:1979 | Fittings, Hydraulic Tube, Flared 37 Degree, Adapter, Straight (Long), Tube to Boss, O-Ring |
| MIL-DTL-55302-192 Revision A:2006 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, 122 and 152 Positions, Printed Wiring Board (.075 Spacing) |
| MIL-DTL-24308-25 Revision K:2008 | Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack and Panel, Screw-Lock Assembly, Male |
| MS9195 Revision B:2010 | Elbow, Tube - SAE-AMS5639, Boss, 45 Degrees |
| MIL-DTL-55302-66 Revision G:2004 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-28840-8 Revision F:2013 | Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, 90 Degree, Cable Sealing and Shield Termination |
| MIL-DTL-12883-50 Revision B:2003 | Sockets and Accessories for Plug-in Electronic Components, Brackets and Socket Assembly for Relays, 2-Pole, 10 Amperes (MIL-PRF-6106 and MIL-PRF-83536) |
| MS51530 Revision B:1988 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Tee, Tube to Boss, Boss on Run, O-Ring, 37 Degree Flared |
| MS20756 Revision F:2011 | Flange, Swivel, Retaining |
| MIL-DTL-39030-23 Base Document:2015 | Dummy Load, Electrical, Coaxial, Type I (SMK), DC-32.0 GHz |
| MIL-DTL-13220-5 Revision B:2015 | Hook, Slip, Eye, with Latch |
| MIL-DTL-32372-11 Revision A:2017 | Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Male to ORFS Female Swivel to NPTF Male on Branch |
| MIL-DTL-55181-6 Revision D:2008 | Connector, Receptacle, Electrical, Waterproof, 9 Socket Contacts, Solder Cup, 7.5 AMP |
| MS18197 Revision G:2016 | Guide Pin, Electrical Connector Male and Female |
| MIL-DTL-52525-9 Revision C:2008 | Fittings, Hose, Screw-On to 37 Degree Flare Female Swivel, Straight |
| MIL-DTL-83796-3 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flareless |
| AN914 Revision 11:2012 | Elbow, Pipe, Internal and External Thread, 90 Degrees (For New Design, Use SAE-AS4854) |
| SAE AMS5343E | Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (17-4) |
| MS20761 Revision C:2016 | Elbow, Flared Tube, Flanged, Swivel, 45 Degree |
| DSCC 93011 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND |
| SAE AS4842A | Fittings and Bosses, Pipe Threaded, Fluid Connection |
| SAE AS22227C | Bearing, Ball, Annular, Generator and Motor Generator |
| SAE AMS5400C | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H935) 170 ksi (1172 MPa) Tensile Strength |
| SAE AS6450B | Lubricant Application, Solid Film, Heat Cured, Potable Water, Hydraulic, and Other Fluid Systems |
| SAE MA3377C | Bolts and Screws, Nickel Alloy UNS N07718, Tensile Strength 1275 MPa Procurement Specification, Metric |
| I.S. EN 6092:2016 | AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
| PREN 16602-70-14 : DRAFT 2016 | SPACE PRODUCT ASSURANCE - CORROSION |
| NASA KSC C 123 : 2009 | SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
| MIL-DTL-13791 Revision H:2015 | Distributor, Ignition System: Integral Coil, Waterproof 24 Volt |
| NASA STD 6012 : 2012 | CORROSION PROTECTION FOR SPACE FLIGHT HARDWARE |
| MIL-DTL-52525-17 Revision C:2008 | Fittings, Clamp-Halves, Flange to Port, for 4-Bolt Split-Flange |
| NASA MSFC HDBK 3697 : 2014 | ELECTRICAL BONDING DESIGN GUIDE HANDBOOK |
| MIL-DTL-52525-31 Revision B:2008 | Fittings, Hose, Screw-on to 37 Degree Flare, Female Swivel |
| MIL-DTL-55302 Revision G:2009 | Connectors, Printed Circuit Subassembly and Accessories |
| A-A-59832 Revision B:2016 | Extractor, Electrical Card, Metal, General Requirements for |
| MS18173 Revision B:2012 | Washer, Flat |
| MIL-DTL-21248 Revision D:2015 | Ring, Retaining (Tapered and Reduced Section Type) |
| MIL-DTL-52525 Revision F:2008 | Fittings, Hose, Hydraulic, Reusable, Field-Attachable and Clamp-Halves, to Mate with SAE-J517 Type Hoses, General Specification for |
| MS9196 Revision C:2015 | Tee, Tube - SAE-AMS5646, Boss |
| MIL-DTL-32480-2 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-32434 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for |
| MS27391 Revision F:2013 | Nipple, Flareless, Tube to Hose - Swivel Nut |
| MIL-DTL-55302-124 Revision A:2006 | Connectors, Printed Circuit Subassembly and Accessories: Keying Accessories |
| MIL-DTL-28754-41 Revision C:2015 | Connectors, Electrical, Modular, Type IV, Connector Assembly, Screw, Insert |
| MIL-DTL-12883-53 Revision B:2003 | Sockets and Accessories for Plug-in Electronic Components, Mounting Track, for Relay Sockets and Electromagnetic Relays |
| MIL-DTL-28840-3 Revision F:2013 | Connector Accessories, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Clamps, Strain Relief, 45 Degree, Open, for Electrical Connectors |
| MIL-DTL-55074 Revision G:2013 | Connectors, Plug and Receptacle, Telephone, Electrical, Subassembly and Accessories and Contact Assembly, Electrical, General Specification for |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| MIL-DTL-83513-12 Revision D:2009 | Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Right Angle, Pin Contacts, 4 Row, Solder Type, Narrow Profile, 100 Contacts, Printed Circuit Board |
| MIL-DTL-83413-7 Revision F:2015 | Connectors and Assemblies, Electrical, Aircraft Grounding: Grounding Clamp Connector for Types I and III Grounding Assemblies, Aluminum Clip, Electrical |
| MIL-DTL-32480-8 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MIL-PRF-49142 Revision B:2004 | Connector, Triaxial, Radio Frequency General Specification for |
| MIL-DTL-32460-4 Base Document:2013 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS Bulkhead |
| MIL-DTL-83413-4 Revision E:2014 | Connectors and Assemblies, Electrical, Aircraft Grounding: Plugs, for Types I and II Grounding Assemblies |
| MIL-DTL-28754-17 Revision E:2014 | Connectors, Electrical, Modular, Connector Assembly, Type V, Style I, Contact Tails on .100 Centers |
| MIL-DTL-32372-5 Revision A:2017 | Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead |
| MIL-DTL-85069 Revision D:2012 | Sleeves and Grommets, Fastener, |
| MIL-DTL-32464-3 Base Document:2013 | Male Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-32372-10 Revision A:2017 | Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Female Run to Run to NPTF Male on Branch |
| MIL-DTL-28840-1 Revision F:2013 | Connector Accessories, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Clamps, Strain Relief, Straight, Open, for Electrical Connectors |
| BS EN 6094:2016 | Aerospace series. Washer, spring, countersunk |
| MIL-DTL-13220-1 Revision B:2015 | Hook, Slip, Clevis |
| MIL-DTL-55181-2 Revision D:2008 | Connector, Receptacle, Electrical, Panel Mount, Waterproof, 4 Pin Contacts, Solder Turret, 35 AMP |
| MS18196 Revision G:2016 | Jackscrew, Electrical Connector, Male and Female, Fixed |
| 16/30354035 DC : 0 | BS EN 4854-2 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, WIDE SERIES - DIMENSIONS AND LOADS |
| MIL-DTL-83517 Revision B:2015 | Connector, Coaxial, Radio Frequency for Coaxial, Strip or Microstrip Transmission Line General Specification for |
| MIL-STD-171 Revision F:2011 | Finishing of Metal and Wood Surfaces |
| MIL-DTL-5070 Revision F:2006 | Adapter, Hose to Tube, Pipe and Flange, Reusable - Hydraulic, Fuel, and Oil Lines, General Specification for |
| MIL-DTL-83522 Revision E:2013 | Connectors, Fiber Optic, Single Ferrule, General Specification for |
| MIL-DTL-32480-3 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-52471-8 Revision B:2008 | Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100RE |
| MIL-DTL-8789 Revision G:2015 | Fitting End, Attachable, Hydraulic, High Pressure (3,000 PSI), General Specification for |
| DSCC 93009 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND |
| MIL-DTL-13220-4 Revision B:2015 | Hook, Slip, Swivel Eye, with Latch |
| MIL-DTL-32460-9 Base Document:2013 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS, Female Swivel |
| MIL-DTL-26666 Revision G:2006 | Hose Assembly, Pneumatic, High Pressure |
| AN848 Revision 13:2015 | Elbow, Hose, 90 Degree |
| MIL-DTL-85052-15 Base Document:2017 | Clamp, Loop, Stainless Steel, 550 Degrees F, Poly-Tetrafluoroethylene (PTFE) |
| MIL-DTL-83513-15 Revision E:2009 | Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Right Angle, Sockets Contacts, 4 Row, Solder Type, Narrow Profile, 100 Contacts, Printed Circuit Board |
| AN 840 : 0011 | ADAPTER, STRAIGHT, PIPE TO HOSE |
| MIL-DTL-32464-9 Base Document:2013 | Male Adapter, Tee, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Run, 1500-3000 PSI |
| MIL-DTL-55302-60 Revision J:2004 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Decade Increments 90, 100 and 120 Contact Positions (.100 Spacing) |
| MS51818 Revision E:1987 | Tee, Pipe to Tube, Male Pipe on Branch, Flareless Type, Hydraulic |
| MIL-DTL-55302-191 Revision C:2011 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Decade Increments 10 thru 100 Positions, Printed Wiring Board (.075 Spacing) |
| MIL-DTL-55302-65 Revision H:2004 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| AN 839 : 0009 | ELBOW, TUBE TO HOSE, 45 DEGREES |
| MIL-DTL-28840-2 Revision F:2013 | Connector Accessories, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Clamps, Strain Relief, 90 Degree, Open, for Electrical Connectors |
| MIL-DTL-32371-1 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Straight |
| SAE AS5000C | Fitting, Plug-in Union, Ring Locked, 24 Degree Cone, Fluid Connection, 5080 psi (35 000 kPa), Specification for |
| MIL-DTL-52525-16 Revision D:2008 | Fittings, Clamp-Halves, for 4-Bolt Split-Flange, SAE-J518-1or SAE-J518-2, Type Split-Flange Clamp (SFC) |
| MS27394 Revision C:2014 | Elbow, Flareless, Tube to Hose - 90 Degrees Swivel Nut |
| MIL-DTL-52471-2 Revision C:2008 | Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100R2, Double-Wire Braided Reinforcement Hose |
| MIL-DTL-52525-37 Revision B:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight |
| MIL-DTL-52471-3 Revision C:2008 | Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100RE, Four-Wire Braided Reinforcement or Multiple Wire Braided Steel Wire Reinforced Hose |
| MIL-DTL-21617-29 Base Document:2003 | Connector, Receptacle Electrical, Rectangular, Polarized Shell, Miniature Type, Back Shells |
| MS51841 Revision E:2017 | Fittings, Hydraulic Tube, Flareless Type, Tee, Tube To Boss On Branch, O-Ring |
| SAE AMS5368D | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.0Ni - 2.3Mo - 0.09N Solution Heat Treated |
| SAE AS85049D | Connector Accessories, Electrical General Specification For |
| SAE AS1339H | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Lightweight, Hydraulic and Pneumatic |
| SAE AMS5357D | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated, Precipitation Hardenable |
| SAE AS12500 | Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies |
| SAE AMS5352F | Steel, Corrosion-Resistant, Investment Castings 17Cr - 0.55Mo (0.95 - 1.20C) Annealed |
| FF-S-1362 Revision A:2014 | Stud, Plain, General Purpose |
| EN 6094:2016 | Aerospace series - Washer, spring, countersunk |
| EN 6092:2016 | Aerospace series - Receptacle, floating, double lug |
| EN 6090:2016 | Aerospace series - Washer, retaining |
| EN 6105:2016 | Aerospace series - Stud with shoulder |
| DSCC 93010 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND |
| MS51517 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Cross |
| MIL-DTL-32372-1 Revision A:2017 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
| MIL-DTL-32371-8 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degree Elbow, Bulkhead |
| MIL-DTL-55302-95 Revision E:2004 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Composite Wrappost, Hermaphroditic Contacts (.100 Inch Spacing) |
| MIL-DTL-32480-9 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MIL-DTL-32371-5 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Union Cross, Spherical on Branch |
| MIL-DTL-32371-7 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow, Bulkhead |
| MS51500 Revision F:2017 | Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Adapter, Straight, Male Pipe End to Tube |
| MIL-DTL-28754-24 Revision C:2014 | Connectors, Electrical, Modular, Pin, Keying |
| MS51505 Revision C:2016 | Fittings, Hydraulic Tube, Flared 37 Degree, 90 Degree Elbow |
| MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
| MIL-DTL-55302-64 Revision H:2004 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-55302-193 Revision B:2009 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, 122 and 152 Position, Printed Wiring Board (.075 Spacing) |
| MIL-DTL-55302-59 Revision H:2004 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Decade Increments 90, 100 and 120 Contact Positions for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-83513-28 Revision B:2009 | Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Straight, Pin Contacts, 2 Row, Solder Type, Standard Profile, 9 Through 37 Contacts, Printed Circuit Board |
| MS27612 Revision M:2013 | Adapter, Hydraulic Bleeder Valve, Aircraft Wheel Brake |
| MIL-DTL-32480-4 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
| MIL-DTL-52525-45 Base Document:2008 | Fittings, Hose, Crimp Type, Split-Flange, 90 Degree Bent Tube |
| MS51513 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Tube to Female Pipe on Branch |
| MIL-DTL-52525-8 Revision C:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 DegreeBent Tube, Long Drop |
| MIL-DTL-32371-2 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow |
| MS51506 Revision E:2017 | Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Elbow, Pipe to Tube, 90 Degree, Female Pipe End, 37 Degree Flared |
| MS51527 Revision D:2000 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 90 Degree, O-Ring, 37 Degree Flared |
| SAE AS4843A | Fittings, Beaded, Fluid Connection |
| MIL-DTL-52525-39 Revision B:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube |
| MS51815 Revision F:1987 | Elbow Pipe to Tube 90 Degree, Male Pipe End, Flareless Type, Hydraulic |
| MS39323 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tube, Reducer |
| MS51523 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Tube To Swivel, Swivel On Run |
| MIL-DTL-28840-5 Revision D:2013 | Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, Straight, Metal Conduit for EMI Shielding |
| MIL-DTL-52525-14 Revision C:2008 | Fittings, Hose Crimp Type, Split-Flange 45 Degree Bent |
| MIL-DTL-83796-12 Base Document:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless |
| MIL-DTL-21617 Revision B:2012 | Connectors, Plug and Receptacle, Electrical, Rectangular, Polarized Shell, Miniature Type General Specification for |
| MS51511 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Tube to Male Pipe on Run |
| MS51812 Revision F:1987 | Nipple, Tube, Bulkhead, Flareless Type Hydraulic |
| MS51515 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Bulkhead on Branch |
| MIL-DTL-52525-41 Revision A:2008 | Fittings, Hose, Crimp Type, Split-Flange, 45 Degrees Bent Tube |
| MS51817 Revision E:1987 | Elbow, Pipe to Tube, 45 Degree Male Pipe End, Flareless Type, Hydraulic |
| MIL-DTL-52525-42 Revision B:2008 | Fittings, Hose, Crimp Type, Split-Flange 90 Degree Bent |
| MS51820 Revision E:1987 | Elbow, Tube, 90 Degree, Flareless Type, Hydraulic |
| MS51518 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Plug, Machine Thread |
| I.S. EN 6094:2016 | AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK |
| MS51813 Revision E:1987 | Elbow, Pipe to Tube 90 Degree, Female Pipe End, Flareless Type, Hydraulic |
| MIL-DTL-83798-2 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 45 Degrees |
| MIL-DTL-52525-12 Revision D:2011 | Fittings, Hose, Screw on to Split-Flange 90 Degree Bent |
| SAE AMS5560N | Steel, Corrosion Resistant, Seamless Tubing 19Cr - 10Ni (304) Solution Heat Treated |
| MIL-DTL-85052-13 Base Document:2017 | Clamp, Loop, Stainless Steel, 212 Degrees F, Chloroprene |
| MIL-DTL-28840-22 Revision C:2013 | Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Metal Conduit Bushing |
| SAE AMS5360F | Steel, Corrosion and Heat-Resistant, Investment Castings 17Cr - 13Ni - 1.9Mo Solution Heat Treated |
| MIL-DTL-32460-2 Base Document:2013 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS Male |
| MIL-DTL-52525-33 Revision A:2008 | Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves: Field Attachable (Reusable), Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, for use with Type 100RE Four-Spiral-Wrap Reinforcement Hose |
| MIL-PRF-39012-80 Revision F:2008 | Connectors, Plug, Electrical, Coaxial, Radio Frequency, Series SMA (Cabled) Pin Contact, Right Angle, Class 2, Semirigid Cable |
| MIL-DTL-13719 Revision G:2012 | Hose and Hose Assembly, Rubber, Hydraulic Brake, Type I and Type II |
| MIL-DTL-55302-58 Revision J:2004 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-21338 Revision B:2014 | Washer, Key Retaining, Ball and Roller Bearings |
| DSCC 93003 : C | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 372 CONTACT POSITIONS |
| SAE AS95234 | Connectors, Electrical, Reverse Bayonet, General Specification For |
| MS39212 Revision K:2018 | Sleeves, Compression, Tube-Hose Fitting-Safety Sleeve Type |
| MIL-DTL-52525-4 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Long Drop |
| MS51503 Revision C:2016 | Fittings, Hydraulic, 37 Degree Flared, Straight Adapter, Female Pipe End to Tube |
| MS51514 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree Tee, Tube to Female Pipe on Run |
| MIL-DTL-83798-6 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 90 Degrees |
| MIL-DTL-25677 Revision G:2016 | Adapter, Cap, and Nozzle, Pressure Lubricating Oil Servicing, Aircraft, General Specification for |
| MIL-PRF-39012-56 Revision G:2011 | Connectors, Plugs, Electrical, Coaxial, Radio Frequency (Series SMA (Cabled) - Plug, Pin Contact, Right Angle, Class 2) |
| MS27613 Revision G:2015 | Connectors, Electrical, Receptacle, Panel Mount, Firewall Series |
| MIL-DTL-85052-16 Base Document:2017 | Clamp, Loop, Stainless Steel, 275 Degrees Fahrenheit, Nitrile Butadiene Rubber Fuel and Petroleum Based Hydraulic Fluid Resistant |
| MIL-DTL-32372-3 Revision A:2017 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
| MS51504 Revision C:2016 | Fittings, Hydraulic, 37 Degree Flared, 90 Degree Elbow, Male Pipe End to Tube |
| A-A-59553 Revision A:2012 | Coupling Halves, Cap and Wye; Quick Disconnect Pneumatic Hose, Two-Lug Universal Type |
| MS27069 Revision H:2017 | Socket, Hose Coupling |
| SAE AS5951D | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems |
| MIL-DTL-28840-9 Revision G:2013 | Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, 45 Degree, Cable Sealing and Shield Termination |
| MIL-DTL-83796-2 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flare, with Lockwire Hole |
| PREN 6091 : 200P1 | AEROSPACE SERIES - CIRCLIP |
| PREN 4833 : DRAFT 2017 | AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| MS27395 Revision D:2014 | Elbow, Flareless, Tube to Hose - 45 Degrees Swivel Nut |
| MS27084 Revision D:2014 | Elbow, Nipple End, Swivel Flange to Hose - 45 Degrees |
| MIL-DTL-83798-1 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, Straight |
| MIL-DTL-28840-13 Revision F:2013 | Connectors, Accessories, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Protective Cover, Receptacle |
| MIL-DTL-83513-20 Revision D:2009 | Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Right Angle, Socket Contacts, 3 Row, Solder Type, Standard Profile, 51 Contacts, Printed Circuit Board |
| MIL-DTL-55302-91 Revision F:2010 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Straight-Thru, Hermaphroditic Contacts (.100 Inch Spacing) |
| MIL-DTL-28840-27 Revision D:2013 | Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, 45 Degree, Metal Conduit for EMI Shielding |
| MIL-DTL-83798-3 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 90 Degrees |
| SAE AMS5354F | Steel, Corrosion and Heat Resistant, Investment Castings 13Cr - 2.0Ni - 3.0W Hardened and Tempered to 32 – 38 HRC |
| MIL-DTL-28840-6 Revision E:2013 | Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, Straight, Cable Sealing and Shield Termination |
| MIL-DTL-12883-51 Revision B:2003 | Sockets and Accessories for Plug-In Electronic Components, Bracket and Socket Assembly for Relays, 4-Pole, 10 Amperes (MIL-PRF-6106, MIL-PRF-83536, and MIL-PRF-83726) |
| PREN 4836 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| MIL-DTL-28754-40 Revision C:2015 | Connectors, Electrical, Modular, Type IV, Connector Assembly, Screw |
| SAE MA3375C | Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric |
| SAE AS81703A | Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting |
| SAE AS83819 | Bearings, Plain, Self-Aligning, Self-Lubricating, 1400 cpm (15 fpm), Oscillation, -65 to +160 °F (-54 to +71 °C) |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| SAE AMS5353E | Steel, Corrosion-Resistant, Investment Castings 16Cr - 1.8Ni - 0.08N As Cast |
| SAE AS5420G | Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification |
| DSCC 89065 : C | GENERAL SPECIFICATION FOR HIGH PERFORMANCE, HIGH DENSITY, TWO PIECE, PRINTED CIRCUIT BOARD CONNECTOR |
| DSCC 85033 : H | HOLDER, ELECTRICAL CARD, METAL CARD GUIDE, ZERO INSERTION FORCE |
| PREN 6105 : 200P1 | AEROSPACE SERIES - STUD WITH SHOULDER |
| PREN 6131 : 200P3 | AEROSPACE SERIES - COMPOSITE CLIP NUT, SELF LOCKING |
| DSCC 83023 : L | RETAINER-EJECTOR, ELECTRICAL CARD, PLASTIC |
| DSCC 89024 : E | HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 5-PIECE, .250 INCH BY .260 INCH BODY SIZE |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.