SAE AMS DTL 23053 : 1999
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
Superseded date
10-16-2016
Superseded by
Published date
01-01-1999
Publisher
Sorry this product is not available in your region.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Determines the requirements for various kinds and colors of electrical insulating sleeving which will shrink to a predetermined size upon applying heat.Includes provisions for demonstration of compliance with requirements through in process inspection and statistical process control. Continuous operating temperatures are in the range -80 deg to +250 deg C (-112 deg to + 482 deg F).
| Committee |
FSC 5970
|
| DevelopmentNote |
Supersedes MIL DTL 23053 (08/1999)
|
| DocumentType |
Standard
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| MIL-DTL-23053 Revision E:1996 | Identical |
| SAE AS 95234 : 2014 | CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
| MIL-PRF-32517 Base Document:2015 | SPLICE, CONDUCTOR, ELECTRICAL, COAXIAL CABLE, MATCHED IMPEDANCE, GENERAL SPECIFICATION FOR |
| SAE AS 95234A : 2020 | CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
| MIL-STD-1678-1 Revision D:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS) |
| MIL-PRF-39003 Revision N:2016 | Capacitor, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Established Reliability, General Specification for |
| MIL-STD-2003-5 Revision A:2009 | ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CONNECTORS) |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| SAE ARP 4945 : 2013 | AEROSPACE-SOLENOID VALVE, HYDRAULIC, THREE WAY, TWO POSITION, DIRECT ACTING |
| I.S. EN 6049-009:2016 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 009: SELF-WRAPPING FIRE PROTECTION SLEEVE, FLEXIBLE, POST INSTALLATION, OPERATING TEMPERATURE FROM -55 DEGREES C TO 260 DEGREES C - PRODUCT STANDARD |
| BS EN 6049-009:2016 | Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 °C to 260 °C. Product standard |
| MIL-DTL-2726-49 Revision F:2013 | RECEPTACLE, OUTLET, TRIPLE, ELECTRICAL, 40 - AMPERE, 450 - VOLT, 60 HERTZ, ALTERNATING CURRENT, 4 - POLE, PORTABLE, PLASTIC GROUNDED (SYMBOL NOS. 765.6, 765.7 AND 765.8) |
| PD ISO/TR 21891:2017 | Aerospace electrical requirements. Sleeves and moulded shapes. Specifications for aircraft use |
| MIL-DTL-15024-8 Revision A:2014 | Plate, Tags and Bands, Band Identification, Cable Assembly, Type K2, Heat Shrinkable Tubing |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| NASA KSC GP 864 VOL 2A : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK |
| NASA KSC STD 132 : 2008 | POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR |
| MIL-HDBK-522 Revision A:2016 | GUIDELINES FOR INSPECTION OF AIRCRAFT ELECTRICAL WIRING INTERCONNECT SYSTEMS |
| MIL-STD-2042-5 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CONNECTORS AND INTERCONNECTIONS) (PART 5 OF 7 PARTS) |
| EN 6049-009:2016 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 °C to 260 °C - Product standard |
| PREN 6049-009 : 200P3 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 009: SELF-WRAPPING FIRE PROTECTION SLEEVE, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREES C TO 260 DEGREES C - PRODUCT STANDARD |
| 12/30275061 DC : 0 | BS EN 6049-009 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTIVE SLEEVE IN ARAMID FIBRES - PART 009: SELF WRAPPING FIRE PROTECTION SLEEVE, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREES C TO 260 DEGREES C - PRODUCT STANDARD |
| SAE AS 50881 : 2015 | WIRING AEROSPACE VEHICLE |
| MIL-PRF-39006 Revision G:2006 | CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| SAE AS 5258 : 2012 | INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR |
| SAE AS 6224 : 2015 | WRAP-AROUND INSULATION REPAIR AND PROTECTION SLEEVE, PERMANENT, ELECTRIC, ENVIRONMENT RESISTANT |
| MIL-DTL-23053-8 Revision C:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYVINYLIDENE FLUORIDE, SEMI-RIGID, CROSSLINKED |
| MIL L 7808 : K (1) | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| FED-STD-228 Revision A:2014 | TEST METHODS FOR CABLES AND WIRE, INSULATED |
| MIL-I-23053-3 Revision A:1976 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYVINYL CHLORIDE, SEMI RIGID, CROSSLINKED AND NON CROSSLINKED |
| MIL-DTL-23053-14 Revision B:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, ETHYLENE-TETRAFLUOROETHYLENE FLUOROPOLYMER, SEMI-RIGID |
| MIL-DTL-23053-17 Revision B:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLAME RETARDED, MODIFIED POLYOLEFIN, FLEXIBLE, CROSSLINKED |
| MIL-DTL-23053-10 Revision D:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, SILICONE RUBBER, FLEXIBLE |
| MIL-DTL-23053-18 Revision B:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, MODIFIED FLUOROPOLYMER, CROSSLINKED |
| MIL-DTL-23053-7 Revision C:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYETHYLENE TEREPHTHALATE, NON-CROSSLINKED |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| MIL L 23699 : E | LUBRICATING OIL, AIRCRAFT TURBINE ENGINES, SYNTHETIC BASE |
| A-A-694 Revision E:2013 | Sodium Chloride, Technical |
| MIL-DTL-23053-13 Revision B:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUOROELASTOMER FLEXIBLE |
| MIL T 5624 : R | TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
| MIL-DTL-23053-15 Revision B:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, HEAVY-WALL, COATED, FLEXIBLE, OUTER WALL CROSSLINKED |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| MIL-I-23053-2 Revision C:1976 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYVINYL CHLORIDE, FLEXIBLE, CROSSLINKED AND NON CROSSLINKED |
| MIL I 23053/9 : LATEST | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUOROSILICONE RUBBER, FLEXIBLE |
| MIL-DTL-23053-16 Revision B:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED, ELASTOMERIC POLYOLEFIN, FLEXIBLE |
| MIL-DTL-23053-5 Revision C:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED |
| MIL-DTL-23053-11 Revision C:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED |
| ASTM D 876 : 2013 : REDLINE | Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation |
| MIL-A-8243 Revision D:1985 | ANTI-ICING AND DEICING-DEFROSTING FLUIDS |
| MIL-DTL-23053-12 Revision C:1996 | INSULATION SLEEVING - ELECTRICAL, HEAT SHRINKABLE, POLYTETRAFLUOROETHYLENE |
| MIL-DTL-23053-1 Revision C:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE |
| MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
| MIL F 46162 : D | FUEL, DIESEL, REFEREE GRADE |
| ASTM D 570 : 1998 : R2018 | Standard Test Method for Water Absorption of Plastics |
| MIL-DTL-23053-6 Revision D:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, SEMI-RIGID, CROSSLINKED |
| MIL-STD-104 Revision C:1986 | LIMITS FOR ELECTRICAL INSULATION COLOR |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| MIL-DTL-23053-4 Revision D:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, DUAL-WALL, OUTER WALL CROSSLINKED |
| ASTM D 2671 : 2013 | Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use |
| ASTM D 374 : 1999 | Standard Test Methods for Thickness of Solid Electrical Insulation |
| ASTM D 746 : 2014 : REDLINE | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.