SAE AMS 5040 : 2015
Current
The latest, up-to-date edition.
Steel, Sheet and Strip 0.15 Carbon, Maximum Deep Forming Grade
Hardcopy , PDF
English
08-04-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
This specification covers a carbon steel in the form of sheet and strip.
| Committee |
AMS-E
|
| DocumentType |
Standard
|
| Pages |
5
|
| ProductNote |
This standard is stabilized now
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| SAE AMS 6387 : 2013 | STEEL, CARBON, LAMINATED SHEET, SURFACE BONDED |
| SAE AMS 3077 A : 1994(S2018) | COMPOUND, CORROSION PREVENTIVE, SOFT FILM, THIXOTROPIC, COLD APPLICATION |
| SAE AMS 3126 : 2013 | Aluminum Coating Material, Corrosion and Heat Resistant Thermosetting, Inorganic Binder |
| MS21077 Revision H:1994 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, NON-METALLIC INSERT, STEEL 125 KSI FTU, 250 DEG F |
| P-W-2891 Revision A:2002 | WIPE SOLVENTS, EXEMPT AND NON-EXEMPT |
| SAE AS 269J:2012:(S2018) | IDENTIFICATION OF MATERIAL FOR AN, MS AND AS ENGINE AND PROPELLER STANDARD UTILITY PARTS AND ALSO FOR COMPANY PARTS |
| SAE AMS 3055 : 2013 | PETROLEUM BASE INSTRUMENT BEARING LUBRICANT VISCOSITY 15 |
| MIL-PRF-32295 Revision B:2017 | CLEANER, NON-AQUEOUS, LOW-VOC, HAP-FREE |
| MIL-PRF-32597 Base Document:2018 | CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE |
| SAE AMS 3159 : 2017 | LEAK TEST SOLUTION - LIQUID OXYGEN COMPATIBLE |
| SAE AMS 3056 : 2017 | LUBRICANT, INSTRUMENT BEARING, PETROLEUM BASE VISCOSITY 35 |
| SAE AMS 1377 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT |
| SAE AMS 1551 : 2008 | CLEANER, TURBINE ENGINE GAS PATH AQUEOUS TYPE |
| MIL C 29602 : 0 | CLEANING COMPOUNDS, FOR PARTS WASHERS AND SPRAY CABINETS |
| SAE ARP 1755 : 2000 | EFFECT OF CLEANING AGENTS ON AIRCRAFT ENGINE MATERIALS, STOCK LOSS TEST METHOD |
| SAE AMS 3054 : 2016 | OIL, LUBRICATING, LOW TEMPERATURE FOR -55 DEGREES C (-67 DEGREES F) SERVICE |
| MS75009 Revision J:2005 | Bracket Assembly, Resistor (Power Type) |
| NASM 21083 : 2004 | NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 DEGREES F |
| SAE AMS 1548 : 2017 | CLEANER, TURBINE ENGINE GAS PATH, SOLVENT EMULSION TYPE |
| SAE AMS 2370 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING, CARBON AND LOW-ALLOY STEEL WROUGHT PRODUCTS AND FORGING STOCK |
| ASTM E 350 : 2012-09 | TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
| SAE AMS 2232 : 2016 | TOLERANCES CARBON STEEL, SHEET, STRIP, AND PLATE |
| SAE AMS 2807B : 2012 | IDENTIFICATION, CARBON AND LOW-ALLOY STEELS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, SHEET, STRIP, PLATE, AND AIRCRAFT TUBING |
| SAE AMS 2259 : 2012 | CHEMICAL CHECK ANALYSIS LIMITS, WROUGHT LOW-ALLOY AND CARBON STEELS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.