SAE AMS4908G
Current
The latest, up-to-date edition.
Titanium Alloy Sheet and Strip 8mn Annealed, 110 Ksi (760 Mpa) Yield Strength
Hardcopy , PDF
English
01-07-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
1.1 Form
1.2 Application
2 Applicable documents
2.1 SAE publications
2.2 ASTM publications
2.3 U.S. government publications
3 Technical requirements
3.1 Composition
3.2 Condition
3.3 Annealing
3.4 Properties
3.5 Quality
3.6 Tolerances
4 Quality assurance provisions
4.1 Responsibility for inspection
4.2 Classification of tests
4.3 Sampling
4.4 Reports
4.5 Resampling and retesting
5 Preparation for delivery
5.1 Identification
5.2 Packaging
6 Acknowledgement
7 Rejections
8 Notes
Specifies a titanium alloy in the form of sheet and strip. Mainly for parts requiring good formability and strength up to 600 Deg F (315 Deg. C).
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This specification has been declared NONCURRENT by the Aerospace Materials Division, SAE, as of April 1994. It is recommended, therefore, that this specification not be specified for new designs.
| ASTM D 4636 : 2017 : REDLINE | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| MIL-PRF-8188 Revision D:1997 | CORROSION-PREVENTIVE, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL L 87100 : 0 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, POLYPHENYL ETHER BASE |
| MIL L 7808 : K (1) | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL-PRF-87100 Revision A:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, POLYPHENYL ETHER BASE |
| SAE AMS 2809 : 2007(R2011) | IDENTIFICATION, TITANIUM AND TITANIUM ALLOY WROUGHT PRODUCTS |
| ASTM E 120 : 2000 | Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys (Withdrawn 2003) |
| SAE AMS2350BA | Standards and Test Methods |
| SAE AMS2249G | Chemical Check Analysis Limits Titanium and Titanium Alloys |
| SAE MAM2242D | Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate |
| MIL-STD-163 Revision C:1978 | STEEL MILL PRODUCTS PREPARATION FOR SHIPMENT AND STORAGE |
| SAE AMS 2242 : 2014 | TOLERANCES, CORROSION AND HEAT RESISTANT STEEL, IRON ALLOY, TITANIUM, AND TITANIUM ALLOY SHEET, STRIP, AND PLATE |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 290 : 2014 : REDLINE | Standard Test Methods for Bend Testing of Material for Ductility |
| SAE ARP 982 : 2016 | MINIMIZING STRESS-CORROSION CRACKING IN WROUGHT TITANIUM ALLOY PRODUCTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.