SAE AMS 2772 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS
Available format(s)
Hardcopy , PDF
Superseded date
03-24-2023
Superseded by
Language(s)
English
Published date
04-19-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGEMENT
7 REJECTIONS
8 NOTES
Specifies requirements and recommendations for the heat treatment of wrought aluminum alloy raw materials by producers.
| Committee |
AMS-D
|
| DevelopmentNote |
Supersedes MIL H 6088 and SAE AMS H 6088. (11/2002)
|
| DocumentType |
Revision
|
| Pages |
25
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS 4028 : 2014 | ALUMINUM ALLOY SHEET AND PLATE, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-O), ANNEALED |
| SAE AMS 4113 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4310 : 2013 | ALUMINUM ALLOY, ROLLED OR FORGED RINGS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T651, 7075-T652) SOLUTION HEAT TREATED, MECHANICALLY STRESS RELIEVED AND PRECIPITATION HEAT TREATED |
| SAE AMS 4272 : 2015 | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE (ALCLAD 2029-T8) 3.6 CU, 0.30 MN, 0.95 MG, 0.40 AG, 0.12 ZR SOLUTION HEAT TREATED, COLD WORKED AND AGED |
| SAE AMS 4332 : 2012 | ALUMINUM ALLOY, EXTRUDED PROFILES (7349-T76511) 8.1ZN - 1.7CU - 2.2MG - 0.16ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4295 : 2013 | ALUMINUM ALLOY SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR (2219 - O, F, T31, T351, T37, T81, T851, T87) |
| SAE AMS 4083 : 2012 | ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4401 : 2011 | ALUMINUM ALLOY PLATE (7140-T7451), 6.6ZN - 1.8CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED (COMPOSITION SIMILAR TO UNS A97140) |
| SAE AMS 4159 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T76511) SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4126 : 2010 | ALUMINUM ALLOY, DIE AND HAND FORGINGS AND ROLLED RINGS - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7079-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4364 : 2016 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.8CU - 2.0MG - 0.10ZR (7099-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4405 : 2012 | ALUMINUM ALLOY, ALCLAD SHEET (6156-T4), 1.0SI - 0.90CU - 0.60MN - 0.90MG, SOLUTION HEAT TREATED AND NATURALLY AGED |
| ASTM B 211 : 2012 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire |
| MIL-DTL-46192 Revision C:1998 | ALUMINUM ALLOY ARMOR ROLLED PLATE (1/2 TO 4 INCHES THICK), WELDABLE (ALLOY 2519) |
| SAE AMS 4046 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD ONE SIDE 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD ONE SIDE 7075; -T6 SHEET -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4465 : 2015 | ALUMINUM ALLOY, CLAD ONE SIDE SHEET, 0.6MG - 0.35SI - 0.28CU (NO. 23 BRAZING SHEET), AS FABRICATED |
| SAE AMS 4312 : 2013 | ALUMINUM ALLOY, ROLLED OR FORGED RINGS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T651, 6061-T652) SOLUTION HEAT TREATED, MECHANICALLY STRESS RELIEVED AND PRECIPITATION HEAT TREATED |
| SAE AMS 4203 : 2012 | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7351) SOLUTION HEAT TREATED, STRESS RELIEVED AND PRECIPITATION HEAT TREATED (COMPOSITION SIMILAR TO UNS A97010) |
| SAE AMS 4141 : 2014 | ALUMINUM ALLOY DIE FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4299 : 2018 | ALUMINUM ALLOY, PLATE (7449-T7951), 8.1ZN - 1.8CU - 2.3MG SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4311 : 2012 | ALUMINUM ALLOY, ROLLED OR FORGED RINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351, 7075-T7352), SOLUTION HEAT TREATED, MECHANICALLY STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4613 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR, SOLUTION HEAT TREATED, COLD WORKED (8%) AND PRECIPITATION HEAT TREATED (2219 -T87) |
| SAE AMS 4330 : 2018 | ALUMINUM ALLOY, PLATE (2297-T87), 2.8CU - 1.5LI - 0.30MN - 0.12ZR, SOLUTION HEAT TREATED, STRETCHED, AND ARTIFICIALLY AGED |
| SAE AMS 4416 : 2017 | ALUMINUM ALLOY, EXTRUDED PROFILES (2196-T8511) 2.9CU - 1.7LI - 0.4MG - 0.4AG - 0.10ZR SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND ARTIFICIALLY AGED |
| SAE AMS 4276 : 2018 | ALUMINUM ALLOY, SHEET - 4.4CU - 1.5MG - 0.60MN (2024-O) ANNEALED, FINE GRAINED |
| SAE AMS 4077 : 2015 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE, 4.4CU - 1.5MG - 0.60MN (CLAD ONE SIDE 2024-O), ANNEALED |
| SAE AMS 4473 : 2017 | ALUMINUM ALLOY PLATE (2624-T39), 4.1CU - 1.4MG - 0.6MN, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4462 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T3 SHEET, -T351 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4015 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE 2.5MG - 0.25CR (5052-O) ANNEALED |
| SAE AMS 4162 : 2014 | ALUMINUM ALLOY, EXTRUSIONS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T8511), SOLUTION TREATED, STRESS RELIEF STRETCHED, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4365 : 2017 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.2CU - 2.1MG - 0.10ZR (7097-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4345 : 2012 | ALUMINUM ALLOY, EXTRUSIONS - 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T77511) SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4048 : 2016 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075-O) ANNEALED OR WHEN SPECIFIED, 'AS FABRICATED' (ALCLAD 7075-F) |
| SAE AMS 4026 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T4 SHEET, -T451 PLATE), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4027 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6 SHEET, -T651 PLATE), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4344 : 2011 | ALUMINUM ALLOY, EXTRUSIONS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4130 : 2014 | ALUMINUM ALLOY DIE FORGINGS, 4.4CU - 0.85SI - 0.80MN (2025-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4131 : 2011 | ALUMINUM ALLOY, DIE AND HAND FORGINGS - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T-74), SOLUTION AND PRECIPITATION HEAT TREATED AND AGED |
| SAE AMSQQA367E:2012(S2018) | ALUMINUM ALLOY FORGINGS |
| SAE AMS 4353 : 2014 | ALUMINUM ALLOY, EXTRUDED ROUND ROD, 3.5CU - 1.0LI - 0.40MG - 0.45AG - 0.12ZR (2050-T84) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND ARTIFICIALLY AGED |
| SAE AMS 4049 : 2016 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075; -T6 SHEET - T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AS 4842 : 2016 | FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION |
| SAE AMS 4357 : 2016 | ALUMINUM ALLOY, DIE FORGINGS 3.5CU - 1.0LI - 0.04MG - 0.35MN - 0.45AG - 0.12ZR (2050-T852) SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4213 : 2016 | ALUMINUM ALLOY PLATE (2027-T351) 4.4CU - 1.2MG - 0.8MN - 0.10ZR, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4268 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN; (2024-T81 SHEET, -T851 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4601 : 2017 | Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold Worked and Naturally Aged (2219 -T31/-T351) |
| SAE AMS 4415 : 2015 | ALUMINUM ALLOY EXTRUSIONS, 8.9ZN - 2.2CU - 2.2MG - 0.15ZR (7136-T76511, -T76510) SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4459 : 2013 | ALUMINUM ALLOY, EXTRUSION, 2.7CU - 1.8LI - 0.7ZN - 0.3MN - 0.3MG - 0.08ZR (2099-T81), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 1 TO 3% AND AGED |
| SAE AMS 4044 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, ANNEALED (7075-O), OR WHEN SPECIFIED, 'AS FABRICATED' (7075-F) |
| SAE AMS 4287 : 2013 | ALUMINUM ALLOY, EXTRUSION, 2.7 CU - 1.8 LI - 0.7 ZN - 0.3 MN - 0.3 MG - 0.08 ZR (2099-T83), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 1% TO 4% AND AGED |
| SAE AMS QQ A 200 : 2004 | ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE, AND WIRE, EXTRUDED: GENERAL SPECIFICATION FOR |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM B 316/B316M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods |
| SAE AMS4466B:2022 | Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T361 Sheet and Plate) Solution Heat Treated, 6% Cold Worked, and Naturally Aged |
| SAE AMS4458B:2022 | Aluminum Alloy, Plate (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 Solution Heat Treated, Cold Worked, and Artificially Aged |
| SAE AMS4478B:2023 | Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T81 Sheet, -T851 Plate) Solution Heat Treated, Cold Worked and Artificially Aged |
| SAE AMS4086P:2022 | Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated, Cold Worked, and Naturally Aged |
| SAE AMS4374A:2022 | Aluminum Alloy, Extruded Profiles 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged |
| SAE AMS4613B:2022 | Aluminum Alloy, Sheet and Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, Solution Heat Treated, Cold Worked (8%) and Precipitation Heat Treated (2219 -T87) |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| SAE AMS 4468 : 2012 | ALUMINUM ALLOY, PLATE, 5.0CU - 0.4MN - 0.5MG - 0.4AG (2139-T84), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED (COMPOSITION SIMILAR TO UNS A92139) |
| SAE AMS 4140 : 2014 | ALUMINUM ALLOY DIE FORGINGS, 4.0CU - 2.0NI - 0.68MG (2018-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4035 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024-0) ANNEALED; OR WHEN SPECIFIED, 'AS FABRICATED' (2024-F) |
| SAE AMS 4086 : 2015 | ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS HYDRAULIC TUBING, 4.4CU - 1.5MG - 0.6MN (2024-T3), SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4325 : 2013 | ALUMINUM ALLOY, EXTRUDED WIDE PANEL PROFILES (7150-T77511), 6.4ZN - 2.4MG - 2.2CU - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED AND OVERAGED |
| SAE AMS 4315 : 2017 | ALUMINUM ALLOY SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, 7075: (-T76 SHEET, -T7651 PLATE), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4066 : 2013 | ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI - (2219-T8511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND PRECIPITATION HEAT TREATED |
| SAE AMS 4172 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4511 OR T4510) SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4274 : 2013 | ALUMINUM ALLOY, ALCLAD SHEET, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024-0), ANNEALED, FINE GRAIN |
| SAE AMS 4466 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T361 SHEET & PLATE), SOLUTION HEAT TREATED, 6% COLD WORKED AND NATURALLY AGED |
| SAE AMS 4472 : 2017 | ALUMINUM ALLOY, PLATE, 4.0CU - 1.0LI - 0.40MG - 0.35AG - 0.13ZR (2195-T34), SOLUTION HEAT TREATED AND STRESS RELIEVED |
| ASTM B 247M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
| SAE AMS 4256 : 2018 | ALUMINUM ALLOY, CLAD TWO SIDES SHEET - 0.6MG - 0.35SI - 0.28CU (NO. 22 BRAZING SHEET) AS FABRICATED |
| MIL-STD-1587 Revision D:2017 | MATERIAL AND PROCESS REQUIREMENTS FOR AEROSPACE WEAPONS SYSTEMS |
| SAE AMS 4335 : 2017 | FORGINGS, ALUMINUM ALLOYS, 2XXX AND 7XXX, HEAT-TREATED, FINISHED-PART PROPERTIES: SHORT-TRANSVERSE TENSILE PROPERTIES AND FRACTURE TOUGHNESS |
| SAE AMS 4296 : 2017 | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE 4.3CU - 1.4MG - 0.60MN (ALCLAD 2524-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4351 : 2014 | ALUMINUM ALLOY, PLATE (7065-T7651) 7.7ZN - 2.1CU - 1.65MG - 0.10ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4081 : 2014 | ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4186 : 2012 | ALUMINUM ALLOY, BARS, RODS, AND WIRE, ROLLED OR COLD FINISHED, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-F), AS FABRICATED OR WHEN SPECIFIED, ANNEALED (7075-O) |
| SAE AMS 4476 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-O), ANNEALED |
| SAE AMS 4409 : 2013 | ALUMINUM ALLOY, PLATE, 4.0ZN - 2.0MG - 0.32MN (7019-T651), SOLUTION HEAT TREATED, STRESS RELIEVED AND ARTIFICIALLY AGED |
| SAE AMS 4094 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI ALCLAD 2219-T81 SHEET SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED ALCLAD 2219-T851 PLATE SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4361 : 2014 | ALUMINUM ALLOY, PLATE (7065-T7451) 7.7ZN - 2.1CU - 1.65MG - 0.10ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4469 : 2013 | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, 1.8 CU - 1.0 MG - 0.8 SI - 0.20 CR, SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED (2013-T4511) |
| SAE AMS 4617 : 2017 | ALUMINUM ALLOY, EXTRUSIONS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73, 7075-T73511, 7075-T73510), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING WHEN REQUIRED, AND OVERAGED |
| SAE AMS 4128 : 2013 | ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T451), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4133 : 2014 | ALUMINUM ALLOY FORGINGS AND ROLLED RINGS, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4121 : 2017 | ALUMINUM ALLOY BARS, RODS, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T6, -T651), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4050 : 2014 | ALUMINUM ALLOY, PLATE, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7451), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4202 : 2005 | ALUMINUM ALLOY, PLATE - 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4111 : 2014 | ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7049-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4298 : 2016 | ALUMINUM ALLOY, ALCLAD SHEET 3.8CU - 1.0MG - 0.30MN - 0.60ZN (ALCLAD 2056-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| SAE AMS 4216 : 2013 | ALUMINUM ALLOY, SHEET, 1.0MG - 0.8SI - 0.8CU - 0.50MN, (6013-T6), SOLUTION HEAT TREATED AND ARTIFICIALLY AGED |
| SAE AMS 4156 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 0.68MG - 0.40SI (6063-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4320 : 2014 | ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7149-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AS 18280 : 2017 | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
| SAE AMS 4194 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024 -T361 SHEET/PLATE WITH 1-1/2% ALCLAD) SOLUTION HEAT TREATED, 6% COLD WORKED AND NATURALLY AGED |
| SAE AMS 4157 : 2018 | ALUMINUM ALLOY EXTRUSIONS, 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4464 : 2017 | ALUMINUM ALLOY PLATE (2624-T351) 4.1CU - 1.4MG - 0.6MN, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4125 : 2014 | Aluminum Alloy Die Forgings, and Rolled or Forged Rings 0.9Si - 0.62Mg - 0.25Cr (6151-T6) Solution and Precipitation Heat Treated |
| SAE AMS 4329 : 2017 | ALUMINUM ALLOY, PLATE (7085-T7651), 7.5ZN - 1.6CU - 1.5MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4036 : 2017 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE 4.4CU - 1.5MG - 0.60MN ALCLAD ONE SIDE 2024 AND 1-1/2% ALCLAD ONE SIDE 2024-T3 SHEET; 1-1/2% ALCLAD ONE SIDE 2024-T351 PLATE |
| SAE AMS 4143 : 2012 | ALUMINUM ALLOY FORGINGS AND ROLLED OR FORGED RINGS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4204C | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7651), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4257 : 2014 | ALUMINUM ALLOY, EXTRUSION 3.7CU - 1.15LI - 0.5ZN - 0.45AG - 0.4MG - 0.3MN - 0.1ZR (2055-T84) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 2% TO 5% AND AGED |
| ASTM B 211M : 2012 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) (Withdrawn 2019) |
| ASTM B 209M : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric) |
| ASTM B 211 : 2012 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire |
| MIL-HDBK-115 Revision C:2016 | U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES) |
| SAE AMS 4319 : 2013 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED, BARS AND RODS 12.2SI - 1.0MG - 0.90CU - 0.90NI (4032-T651) SOLUTION HEAT TREATED, STRESS-RELIEVED, AND ARTIFICIALLY AGED |
| SAE AMS 4403 : 2017 | ALUMINUM ALLOY, DIE FORGINGS, 7.5ZN - 1.6CU - 1.5MG - 0.12ZR (7085-T7452), SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| ASTM B 483/B483M : 2013 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Pipe for General Purpose Applications |
| SAE AMS 2770 : 2015 | HEAT TREATMENT OF WROUGHT ALUMINUM ALLOY PARTS |
| SAE AMS 4115 : 2015 | ALUMINUM ALLOY, ROLLED OR COLD-FINISHED, BARS, RODS, WIRE, AND FLASH WELDED RINGS, ANNEALED, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) |
| SAE AMS 4314 : 2012 | ALUMINUM ALLOY, RINGS, ROLLED OR FORGED 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T651, 2014-T652) SOLUTION HEAT TREATED, MECHANICALLY STRESS RELIEVED AND PRECIPITATION HEAT TREATED |
| SAE AMS 4078 : 2011 | ALUMINUM ALLOY SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, 7075: (-T73 SHEET, -T7351 PLATE), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4458 : 2016 | ALUMINUM ALLOY, PLATE (2.7 CU - 1.8 LI - 0.7 ZN) 2099-T86, SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| ASTM B 234M : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric) |
| SAE AMS 4278 : 2013 | ALUMINUM ALLOY, ALCLAD SHEET 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075-0) ANNEALED, FINE GRAINED |
| SAE AMS 4306 : 2018 | ALUMINUM ALLOY, PLATE, 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T6151), SOLUTION HEAT TREATED, STRESS RELIEVED, AND AGED |
| SAE AMS 4269 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN; (2024-T361), SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4200 : 2017 | ALUMINUM ALLOY PLATE, 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4277 : 2018 | ALUMINUM ALLOY, SHEET - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-O) ANNEALED, FINE GRAINED |
| SAE AMS 4412 : 2015 | ALUMINUM ALLOY, SHEET, 3.2CU - 0.52MG - 0.30AG - 0.12ZR (2198-T8), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4339 : 2018 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 4.4CU - 1.5MG - 0.60MN (2024-T-851) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4154 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T6, 7075-T6510, 7075-T6511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING WHEN REQUIRED AND PRECIPITATION HEAT TREATED |
| SAE AMS 4079 : 2017 | ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS, TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O), CLOSE TOLERANCE, ANNEALED |
| SAE AMS 4193 : 2017 | ALUMINUM ALLOY SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024-T861), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4343 : 2012 | ALUMINUM ALLOY, EXTRUSIONS, 7.7ZN - 2.4MG - 1.6CU - 0.16CR, (7149-T73511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |
| SAE AMS 4002 : 2018 | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN 1.8CU - 1.0MG - 0.8SI - 0.20CR SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED (2013-T6511) |
| SAE AMS 4293 : 2013 | ALUMINUM ALLOY EXTRUSIONS, 7.9ZN - 1.6CU - 2.2MG - 0.16CR (7249-T76511), SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4183 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES (2027-T3511) 4.4CU - 1.2MG - 0.8MN - 0.10ZR, SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4331 : 2014 | ALUMINUM ALLOY EXTRUSIONS 7.8ZN - 2.6MG - 2.0CU - 0.10ZR - (7068-T6511) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4252 : 2012 | ALUMINUM ALLOY, PLATE - 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T7751), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4160 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-0), ANNEALED |
| SAE AMS 4251 : 2017 | ALUMINUM ALLOY SHEET, 2.7CU - 2.2LI - 0.12ZR (2090-T83), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4411 : 2013 | ALUMINUM ALLOY PLATE (7081-T7651), 7.2ZN - 1.5CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED |
| SAE AMS 4045 : 2016 | ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4479 : 2015 | ALUMINUM ALLOY, EXTRUDED PROFILES (2824-T3511) 4.0CU - 1.35MG - 0.7MN SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4127 : 2012 | ALUMINUM ALLOY, FORGINGS AND ROLLED OR FORGED RINGS, (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4084 : 2017 | ALUMINUM ALLOY SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4463 : 2017 | ALUMINUM ALLOY, PLATE (7255-T7751) 8.0ZN - 2.3CU - 2.0MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4101 : 2018 | ALUMINUM ALLOY, PLATE, 4.4CU - 1.5MG - 0.60MN (2124-T851), SOLUTION HEAT TREATED, STRETCHED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4327 : 2016 | ALUMINUM ALLOY, PLATE (2098-O), 3.5CU - 1.1LI - 0.50MG - 0.40AG - 0.11ZR, ANNEALED |
| SAE AMS 4165 : 2013 | ALUMINUM ALLOY, EXTRUSIONS, 4.4CU - 1.5MG - 0.60MN (2024-T3511), SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED |
| SAE AMS 4122 : 2012 | ALUMINUM ALLOY BARS, RODS, AND WIRE ROLLED OR COLD FINISHED, AND RINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T6, 7075-T651), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS A 81596 : 2018 | ALUMINUM FOIL FOR SANDWICH CONSTRUCTION |
| SAE AMS 4255 : 2012 | ALUMINUM ALLOY, CLAD ONE SIDE SHEET - 0.6MG - 0.35SI - 0.28CU (NO. 21 BRAZING SHEET) AS FABRICATED |
| SAE AMS 2767 : 2013 | UPHILL QUENCHING OF ALUMINUM ALLOY PRODUCT |
| SAE AMS 4205 : 2015 | ALUMINUM ALLOY, PLATE 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4337 : 2017 | ALUMINUM ALLOY, EXTRUDED PROFILES (7055-T77511), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4347 : 2014 | ALUMINUM ALLOY SHEET, 1.0MG - 0.8SI - 0.8CU - 0.5MN (6013-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
| ASTM B 483/B483M : 2013 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications |
| ASTM B 247 : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| NASA MSFC SPEC 3635 : 2012 | PYROTECHNIC SYSTEM SPECIFICATION |
| NASA STD 6016(INT) : 2006 | STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA STD 6016 : 2016 | STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
| NASA JSC 27301 : 2009 | MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| SAE AMS 4414 : 2013 | ALUMINUM ALLOY, HAND FORGINGS, 7.5ZN - 1.6CU - 1.5MG - 0.12ZR (7085-T7452), SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4090 : 2015 | ALUMINUM ALLOY, PLATE 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| SAE AMS 4599 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR, SOLUTION AND PRECIPITATION HEAT TREATED (2219 -T81/-T851) |
| SAE AMS 4460 : 2015 | ALUMINUM ALLOY, CLAD TWO SIDES SHEET, 0.6MG - 0.35SI - 0.28CU (NO. 24 BRAZING SHEET), AS FABRICATED |
| NASA PRC 2002 : 2011 | PROCESS SPECIFICATION FOR THE HEAT TREATMENT OF ALUMINUM ALLOYS |
| SAE AMS 4163 : 2017 | ALUMINUM ALLOY, EXTRUSIONS 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T3511) SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED |
| SAE AMS 4342 : 2018 | ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T74511), SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| MS16051 Revision G:2014 | COUPLING, GROUND COOLING, COMBAT TYPE AIRCRAFT |
| SAE AMS4147D | ALUMINUM ALLOY FORGINGS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7352) SOLUTION HEAT TREATED, STRESS RELIEVED BY COMPRESSION, AND OVERAGED |
| SAE AMS 4474 : 2015 | ALUMINUM ALLOY, SHEET AND PLATE, 4.0CU - 1.0LI - 0.40MG - 0.35AG - 0.13ZR (2195-T8), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4341 : 2011 | ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4089 : 2014 | ALUMINUM ALLOY, PLATE 1.6CU - 2.2MG - 0.22CR - 5.7ZN (7475-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4068 : 2015 | ALUMINUM ALLOY, DRAWN SEAMLESS TUBING, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T3511), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| MIL-DTL-46118 Revision E:1998 | ALUMINUM ALLOY ARMOR, 2219, ROLLED PLATE AND DIE FORGED SHAPES |
| SAE AMS 4477 : 2017 | ALUMINUM ALLOY, COILED SHEET, 4.4CU - 1.5MG - 0.60MN (2024-T4), SOLUTION TREATED |
| SAE AMS 4173 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T6511 OR T6510) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4413 : 2012 | ALUMINUM ALLOY, PLATE, 3.5 CU - 1.0LI - .40MG - .35 MN - .45AG - 0.12ZR (2050-T84), SOLUTION HEAT TREATED, STRESS RELIEVED, AND ARTIFICIALLY AGED |
| SAE AMS 4461 : 2012 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024-O, SHEET AND PLATE) ANNEALED; OR WHEN SPECIFIED, 'AS FABRICATED' (2024-F) |
| MIL-DTL-8789 Revision G:2015 | FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR |
| SAE AMS 4118 : 2014 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.0CU - 0.70MN - 0.60MG - 0.50SI (2017; -T4, -T451), SOLUTION HEAT TREATED |
| SAE AMS 4404 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES (6056-T4511), 1.0SI - 0.90MG - 0.80CU - 0.60MN - 0.40ZN, SOLUTION HEAT TREATED AND STRESS-RELIEVED BY STRETCHING |
| SAE AMS QQ A 250 B : 2012 | ALUMINUM AND ALUMINUM ALLOY, PLATE AND SHEET GENERAL SPECIFICATION FOR |
| SAE AMS 4025 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) ANNEALED |
| SAE AMS 4333 : 2015 | ALUMINUM ALLOY, DIE FORGINGS 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7452) SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4152 : 2007 | ALUMINUM ALLOY EXTRUSIONS 4.4CU - 1.5MG - 0.60MN (2024-T3) SOLUTION HEAT TREATED |
| SAE AS 4843 : 2016 | FITTINGS, BEADED, FLUID CONNECTION |
| SAE AMS4221E : 2016 | ALUMINUM ALLOY, PLATE, 4.4CU - 1.5MG - 0.60MN (2124-T8151) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4149 : 2016 | ALUMINUM ALLOY, DIE AND HAND FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T74), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4374 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES, 8.9ZN - 2.2CU - 2.2MG - 0.15ZR (7136-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED |
| SAE AMS QQ A 225 : 2018 | ALUMINUM AND ALUMINUM ALLOY, BAR, ROD, WIRE OR SPECIAL SHAPES; ROLLED, DRAWN OR COLD FINISHED; GENERAL SPECIFICATION FOR |
| SAE AMS 4120 : 2018 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.4CU - 1.5MG - 0.60MN (2024), SOLUTION HEAT TREATED AND NATURALLY AGED (T4), SOLUTION HEAT TREATED, COLD WORKED, AND NATURALLY AGED (T351) |
| SAE AMS 4470 : 2012 | ALUMINUM ALLOY, PLATE (7085-T7451), 7.5ZN - 1.6CU - 1.5MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4313 : 2016 | ALUMINUM ALLOY, ROLLED OR FORGED RINGS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T351, 2219-T352) SOLUTION HEAT TREATED AND MECHANICALLY STRESS RELIEVED |
| SAE AMS 4041 : 2012-07 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024, -T3 SHEET/-T351 PLATE WITH 1-1/2% ALCLAD) SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4475 : 2017 | Aluminum Alloy, Coiled Sheet, Alclad 4.4Cu – 1.5Mg – 0.60Mn (Alclad 2024; -T4 Coiled Sheet) Solution Heat Treated |
| SAE AMS 3025 : 2018 | POLYALKYLENE GLYCOL HEAT TREAT QUENCHANT |
| SAE AMS 4467 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU 1.5MG 0.60MN (ALCLAD 2024, -T861 SHEET & PLATE) SOLUTION HEAT TREATED, 6% COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4366 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES (2065-T84) 4.2CU - 1.2LI - 0.52MG - 0.32MN - 0.32AG - 0.1ZR SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND ARTIFICIALLY AGED |
| SAE AMS 4179 : 2016 | ALUMINUM ALLOY FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T7452), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4117 : 2015 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE AND FLASH WELDED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6, -T651) |
| SAE AMS 4161 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4243 : 2014 | ALUMINUM ALLOY, ALCLAD SHEET 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (ALCLAD 7050-T76) SOLUTION HEAT TREATED AND OVERAGED |
| ASTM B 211M : 2012 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) |
| SAE AMS 4359 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES (2395-T84), 3.95CU - 1.15LI - 0.3AG - 0.5MG - 0.1ZR, SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND AGED |
| ASTM B 234 : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers |
| SAE AMS 4037 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED |
| SAE AMS 4116 : 2015 | ALUMINUM ALLOY, BARS, RODS, AND WIRE, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T4), COLD FINISHED, SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4323 : 2015 | ALUMINUM ALLOY, HAND FORGINGS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7452) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4040 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024-O WITH 1-1/2% ALCLAD); ANNEALED |
| SAE AMS 4095 : 2018 | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI ALCLAD 2219-T31; SHEET, SOLUTION HEAT TREATED AND COLD WORKED ALCLAD 2219-T351; PLATE, SOLUTION HEAT TREATED AND STRESS RELIEVED |
| SAE AMS 4164 : 2013 | ALUMINUM ALLOY, EXTRUSIONS, 4.4CU - 1.5MG - 0.60MN (2024-T3510), STRESS-RELIEF STRETCHED, UNSTRAIGHTENED |
| MIL-DTL-32375 Revision B:2017 | Armor Plate, Aluminum Alloy, 7085, 7056, 7075, 7181, and 7099, Unweldable Applique |
| SAE AMS 4338 : 2007 | ALUMINUM ALLOY, EXTRUSIONS, 4.0CU - 1.3MG - 0.60MN (2026-T3511), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4336 : 2013 | ALUMINUM ALLOY, EXTRUDED ROD, BAR, AND PROFILES (7055-T76511) - 8.0ZN - 2.3CU - 2.0MG - 0.16ZR - SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4372 : 2018 | ALUMINUM ALLOY, PLATE, 3.5CU - 1.0LI - 0.40MG - 0.35MN - 0.45AG - 0.12ZR (2050-T34), SOLUTION HEAT TREATED AND STRESS RELIEVED |
| SAE AMS 4088 : 2015 | ALUMINUM ALLOY, DRAWN, SEAMLESS TUBING 4.4CU - 1.5MG - 0.60MN (2024-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AS 4841 : 2017 | FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
| SAE AMS 4080 : 2016 | ALUMINUM ALLOY, DRAWN SEAMLESS TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-0), ANNEALED |
| SAE AMS 4124 : 2012 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |
| SAE AMS 4132 : 2013 | ALUMINUM ALLOY, DIE AND HAND FORGINGS, ROLLED RINGS, AND FORGING STOCK, 2.3CU - 1.6MG - 1.1FE - 1.0NI - 0.18SI - 0.07TI (2618-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4307 : 2017 | ALUMINUM ALLOY, EXTRUSIONS, 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T61511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4100 : 2016 | ALUMINUM ALLOY, ALCLAD, SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (ALCLAD 7475-T761), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4410 : 2013 | ALUMINUM ALLOY PLATE (7081-T7451), 7.2ZN - 1.5CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED |
| SAE AMS 4029 : 2012 | ALUMINUM ALLOY SHEET AND PLATE (2014; -T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED (COMPOSITION SIMILAR TO UNS A92014) |
| SAE AMS 4195 : 2016 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024 AND 1-1/2% ALCLAD 2024-T861 FLAT SHEET; 1-1/2% ALCLAD 2024-T861 PLATE), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4207 : 2012 | ALUMINUM ALLOY SHEET, ALCLAD, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T61) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4457 : 2014 | ALUMINUM ALLOY, SHEET 3.5CU - 1.1LI - 0.50MG - 0.40AG - 0.12ZR (2098-T8) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4082 : 2014 | ALUMINUM ALLOY, SEAMLESS DRAWN TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 7488F : 2013(R2018) | RINGS, FLASH WELDED, ALUMINUM AND ALUMINUM ALLOYS |
| SAE AMS 4480 : 2015 | ALUMINUM ALLOY, SEAMLESS DRAWN TUBING 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4031 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-O) ANNEALED OR WHEN SPECIFIED, 'AS FABRICATED' (2219-F) |
| SAE AMS 4270 : 2016 | ALUMINUM ALLOY, ALCLAD FLAT SHEET 4.1CU - 1.4MG - 0.45MN (ALCLAD 2424-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4211 : 2012 | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.9CU - 2.1MG - 0.10ZR (7040-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4085 : 2011 | ALUMINUM ALLOY SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T761), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4407 : 2018 | ALUMINUM ALLOY, PLATE (7056-T7651), 9.1ZN - 1.6CU - 1.9MG, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4324 : 2016 | ALUMINUM ALLOY, EXTRUDED ROD, BAR AND PROFILES (7055-T74511), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4478 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T81 SHEET, -T851 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS A 22771 : 2018 | ALUMINUM ALLOY FORGINGS, HEAT TREATED |
| SAE AMS 4153 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4356 : 2016 | ALUMINUM ALLOY SEAMLESS DRAWN ROUND TUBING, 2.3 CU - 8.0 ZN - 2.0 MG - 0.16 ZR (7155-T76), SOLUTION HEAT TREATED AND AGED |
| SAE AMS 4408 : 2018 | ALUMINUM ALLOY, PLATE (7140-T7651), 6.6ZN - 1.8CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4326 : 2018 | ALUMINUM ALLOY, 2013, EXTRUDED BAR, ROD, AND PROFILES, 1.0MG - 0.80SI - 1.8CU - 0.20CR (2013- T6511), SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED |
| SAE AMS 4305 : 2012 | ALUMINUM ALLOY, EXTRUDED PROFILES (7449-T79511) 8.1ZN - 1.8CU - 2.2MG - 0.16ZR SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED (COMPOSITION SIMILAR TO UNS A97449) |
| SAE AS 4875 : 2016 | FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
| SAE AMS 4279 : 2011 | ALUMINUM ALLOY, ALCLAD SHEET, 4.4CU - 1.5MG - 0.60MN (2024 -T4 FLAT SHEET), SOLUTION HEAT TREATED, HIGH FORMABILITY |
| SAE AMS 4174 : 2016 | Aluminum Alloy, Flash Welded Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated |
| SAE AMS 4087 : 2015 | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, (2024-0), REINSTATE COMPOSITION ANNEALED |
| SAE AMS 4107 : 2018 | ALUMINUM ALLOY DIE FORGINGS (7050-T74) SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4123 : 2011 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS (7075-T651) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4150 : 2013 | ALUMINUM ALLOY, EXTRUSIONS AND RINGS 1.0MG - 0.60SI - 0.28CU - 0.20CR - (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4201 : 2014 | ALUMINUM ALLOY PLATE 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4340 : 2011 | ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T76511), SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4096 : 2016 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (ALCLAD 2219-O), ANNEALED |
| SAE AMS 4354 : 2016 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.8CU - 2.0MG - 0.10ZR (7099-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4402 : 2018 | ALUMINUM ALLOY, EXTRUDED PROFILES (2024-T432), 4.4CU - 1.5MG - 0.6MN, ANNEALED, STRETCH FORMED, SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS4193E:2023 | Aluminum Alloy, Sheet, and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T861) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
| ASTM B 666/B666M : 2015 : REDLINE | Standard Practice for Identification Marking of Aluminum and Magnesium Products |
| MMPDS 10 : 2015 | METALLIC MATERIALS PROPERTIES DEVELOPMENT AND STANDARDIZATION (MMPDS) - COMPLETE SET INCLUDES 9 CHAPTERS |
| SAE AMS 2770 : 2015 | HEAT TREATMENT OF WROUGHT ALUMINUM ALLOY PARTS |
| ASTM B 557 : 2015 : REDLINE | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
| MIL-STD-1537 Revision C:2002 | Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys, Eddy Current Method |
| SAE AMS 2750 : 2012 | PYROMETRY |
| ASTM B 557M : 2015 : REDLINE | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric) |
| SAE AS1990D:2003(S2016) | ALUMINUM ALLOY TEMPERS |
| MIL-H-6088 Revision G:1991 | HEAT TREATMENT OF ALUMINIUM ALLOYS |
| ANSI H35.1 : 2006 | ALLOY AND TEMPER DESIGNATION SYSTEMS FOR ALUMINUM |
| SAE ARP 1962 : 1995 | TRAINING AND APPROVAL OF HEAT-TREATING PERSONNEL |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.