SAE AMS 2634 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ULTRASONIC INSPECTION, THIN WALL METAL TUBING
Available format(s)
Hardcopy , PDF
Superseded date
08-08-2020
Superseded by
Language(s)
English
Published date
01-01-2013
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding +/-10% of nominal.
| Committee |
AMS-K
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| 16/30282721 DC : 0 | BS ISO 18487-1 - AEROSPACE SERIES - TITANIUM TUBE FOR 35MPA OPERATING PRESSURE - PART 1: INCH SERIES |
| SAE AMS 5575 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| ASTM F 2146 : 2013 : REDLINE | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| SAE AMS 5558H : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING 18CR - 10.5NI - 0.70CB (NB) (347) THIN WALL SOLUTION HEAT TREATED |
| SAE AMS 5572 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 25CR - 20NI (SAE 30310S), SOLUTION HEAT TREATED |
| SAE AMS 5578 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 12CR - 8.5NI - 0.30CB - 1.1TI - 2.0CU, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5582 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE TO 155 KSI (1069 MPA) TENSILE STRENGTH |
| SAE AMS 5556 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED |
| SAE AMS 4946 : 2016 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC, 3AL - 2.5V, TEXTURE CONTROLLED, COLD WORKED, STRESS RELIEVED |
| SAE AMS 5573 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 17CR - 12NI - 2.5MO (SAE 30316), SOLUTION HEAT TREATED |
| SAE AMS 5559 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.40TI (SAE 30321), THIN WALL, SOLUTION HEAT TREATED |
| SAE AMS 4944 : 2015 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3.0AL - 2.5V COLD WORKED, STRESS RELIEVED |
| SAE AMS 5564 : 2013 | STEEL, CORROSION RESISTANT, TUBING 19CR - 10NI (SAE 30304) HIGH-PRESSURE HYDRAULIC, WELDED PLUS ULTRASONICALLY TESTED OR SEAMLESS COLD DRAWN, ONE EIGHTH - HARD TEMPER |
| SAE AMS 5557 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED |
| SAE AMS 4922 : 2014 | TITANIUM ALLOY, SEAMLESS, HYDRAULIC TUBING 15V - 3.0CR - 3.0AL - 3.0SN COLD WORKED AND PRECIPITATION HEAT TREATED |
| BS ISO 18487-1:2017 | Aerospace series. Titanium tube for 35 MPa operating pressure Inch series |
| SAE AMS 5586 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 57NI - 19.5CR - 13.5CO - 4.2MO - 2.9TI - 1.4AL - 0.006B - 0.08ZR, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, ANNEALED |
| SAE AMS 5583 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE TO 170 KSI (1172 MPA) TENSILE STRENGTH |
| SAE AMS 5565L : 2013 | STEEL, CORROSION RESISTANT, WELDED TUBING, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
| SAE AMS 5574 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING, 23CR - 13.5NI (SAE 30309S) SOLUTION HEAT TREATED |
| SAE AMS 5563 : 2012 | STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED TUBING, 19CR - 9.5NI (SAE 30304), COLD DRAWN, 1/4 HARD TEMPER |
| SAE AMS 4943 : 2015 | TITANIUM ALLOY, HYDRAULIC, SEAMLESS TUBING, 3.0AL - 2.5V, ANNEALED |
| ISO 18487-1:2017 | Aerospace series — Titanium tube for 35 MPa operating pressure — Part 1: Inch series |
| SAE AMS 2368 : 2017 | SAMPLING AND TESTING OF WROUGHT TITANIUM RAW MATERIAL EXCEPT FORGINGS AND FORGING STOCK |
| SAE AMS 5896 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.55TI (321), SOLUTION HEAT TREATED AND COLD DRAWN, 1/8 HARD TEMPER |
| SAE AMS5554G:2016 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 16.5CR - 4.5NI - 2.9MO - 0.10N, ANNEALED |
| SAE AMS 4945 : 2014 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED |
| SAE AMS 5585 : 2016 | ALLOY, CORROSION AND HEAT RESISTANT, WELDED TUBING, 32FE - 21CR - 20NI - 20CO - 3MO - 2.5W - 1.0CB (NB) - 0.15N, SOLUTION HEAT TREATED |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| MIL-STD-410 Revision E:1991 | NONDESTRUCTIVE TESTING PERSONNEL QUALIFICATION AND CERTIFICATION (EDDY CURRENT, LIQUID PENETRANT, MAGNETIC PARTICLE, RADIOGRAPHIC AND ULTRASONIC) |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.