SAE AMS 2411 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLATING, SILVER FOR HIGH TEMPERATURE APPLICATIONS
Available format(s)
Hardcopy , PDF
Superseded date
07-15-2019
Superseded by
Language(s)
English
Published date
01-01-2013
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Describes the requirements for silver deposited on metal parts with a nickel strike between the basis metal and the silver deposit.
| Committee |
AMS-B
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DOD-I-63276 Revision A:1983 | INSERT, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC AND RING LOCK SERRATED METRIC |
| MIL-DTL-8783 Revision D:2009 | Clamp, Hose, Flat Band 500 Degrees F, General Specification for |
| SAE AS 4941 : 2015 | AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS |
| SAE MA 4368 : 2018 | NUT, PLAIN ROUND - SPANNER WRENCHING, SHAFT MOUNTED, UNS S66286, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE MA 1568 : 2018 | NUT, SELF LOCKING - UNS S66286, 425 DEGREE C AND 650 DEGREE C, 1100 MPA, MJ THREAD, PROCUREMENT SPECIFICATION FOR, METRIC |
| MIL I 45910 : C | INSERT, SCREW THREAD LOCKED IN & RING LOCKED 1 SERRATED GENERAL SPECIFICATION FOR |
| MIL-DTL-25027 Revision H:1997 | NUT, SELF-LOCKING, 250 DEG F, 450 DEG F, AND 850 DEG F |
| MIL-N-7873 Revision B:1994 | NUT, SELF-LOCKING 1,200 DEG F |
| MIL-F-8961 Revision A:1992 | Fastener Element, Self-Locking, Externally Threaded, 450 Degrees Fahrenheit and 1,200 Degrees Fahrenheit |
| DOD-I-63274 Revision A:1983 | Insert, Screw Thread-Thin Wall, Locked in, Metric, General Specification for |
| SAE AS 4958 : 2013 | PERFORMANCE, NUT, SELF-LOCKING, CASTELLATED, PREVAILING TORQUE, UNJ 16 PITCH THREAD FORM |
| MIL-STD-1516 Revision B:1990 | UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL |
| SAE AS 7253 : 2015 | NUTS, SELF-LOCKING, NICKEL ALLOY, UNS N07001 CLASSIFICATION: 180 KSI/1400 DEGREES F, PROCUREMENT SPECIFICATION |
| MIL-DTL-45932 Revision A:2015 | INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR |
| SBAC TS 128 : 6 | 'ALL-METAL' SELF-LOCKING NUTS (UNJ THREADS) 1100 MPA (160,000 LBF/IN[2]) MINIMUM TENSILE STRENGTH AT ROOM TEMPERATURE |
| SAEITC TS156-2 | TS156 Performance Specification for Insert Salvage Metric Thinwall Screw Locking, Inconel 718 Silver Coated |
| SBAC TS 26 : 4 | TECHNICAL SPECIFICATION FOR ALL METAL SELF-LOCKING NUTS (UNJ THREADS) 1210 MPA (175,000 LBF/IN[2]) MINIMUM TENSILE STRENGTH AT AMBIENT TEMPERATURE |
| SAEITC TS149-2 | TS149 Technical Specification for All Metal Self-Locking Nuts (UNJ Threads) 1550 MPa (225,000 lbf/in²) Minimum Tensile Strength at Ambient Temperature |
| SAEITC TS153-2 | TS153 Performance Specification of Insert Salvage, Imperial, Thinwall Screw Locking, Inconel 718 Silver Coated |
| SAE AS 7250D : 2013(R2018) | NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 DEGREES F USE, UN THREAD FORM |
| SAE AS 4393 : 2015 | NUT, SELF-LOCKING, UNS S66286, 1200 DEGREES F, 160,000 PSI, UNJ THREAD |
| MIL-DTL-45910 Revision D:2015 | INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED GENERAL SPECIFICATION FOR |
| SAE ARP 700 : 1997(R2006) | HIGH STRENGTH ELEVATED TEMPERATURE BOLTING PRACTICE |
| SAE AS 5377 : 2000 | NUT, SELF-LOCKING, 0.7500 THRU 1.5000 THREAD SIZES, UNS S66286, 160,000 PSI, 800 DEGREE F, UNJ THREAD - PROCUREMENT SPECIFICATION |
| SAE AS 5887 : 2014 | INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR |
| SAE AS 7251 : 2014 | NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 DEGREES F USE, UNJ THREAD FORM |
| SAE MA 1943 : 2012 | NUTS, SELF-LOCKING, UNS N07001, 760 DEGREE C, 1100 MPA AND 1210 MPA, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AS 3506 B: 2014(R2019) | INSERT - SCREW THREAD, THIN WALL, SELF-LOCKING UNS N07718, SILVER PLATED, CLASS: 185 KSI/1025 DEGREES F, PROCUREMENT SPECIFICATION |
| SAE AMS 5616 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 13CR - 2.0NI - 3.0W ANNEALED |
| SAE AMS 5709 : 2013 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREE F (1079 DEGREE C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5643 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AMS 2750 : 2012 | PYROMETRY |
| SAE AMS 6304 : 2016 | LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C) |
| ASTM B 567 : 1998 | Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
| SAE AMS 5732 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 2759/9 : 2009 | HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS |
| SAE AMS5640V:2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING |
| SAE AS 2390 : 2013(R2019) | CHEMICAL PROCESS TEST SPECIMEN MATERIAL |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.