S.R. CEN/TS 17010:2016
Current
The latest, up-to-date edition.
NANOTECHNOLOGIES - GUIDANCE ON MEASURANDS FOR CHARACTERISING NANO-OBJECTS AND MATERIALS THAT CONTAIN THEM
Hardcopy , PDF
English
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Approaches to identify measurands to characterize
nano-objects and their agglomerates and aggregates,
and materials containing nano-objects
6 Measurands related to size and shape measurement
of nano-objects and their agglomerates and aggregates
7 Measurands related to chemical analysis of
nano-objects and their agglomerates and aggregates
8 Measurands related to mass and density
9 Measurands related to charge - Liquid dispersions
10 Measurands related to crystallinity
11 Optical properties measurands
12 Electrical and electronic measurands
13 Magnetic measurands
14 Thermal measurands
15 Other performance related measurands
Bibliography
Describes guidelines for the identification of measurands to characterize nano-objects, and their agglomerates and aggregates and to assess specific properties relevant to the performance of materials that contain them.
| DocumentType |
Standard
|
| Pages |
80
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| SupersededBy |
| Standards | Relationship |
| CEN/TS 17010:2016 | Identical |
| EN ISO 14577-3:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015) |
| ISO 14577-4:2016 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 4: Test method for metallic and non-metallic coatings |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO/TS 80004-6:2013 | Nanotechnologies Vocabulary Part 6: Nano-object characterization |
| EN 481:1993 | Workplace atmospheres - Size fraction definitions for measurement of airborne particles |
| CEN ISO/TS 80004-1:2015 | Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2015) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN ISO 14577-1:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015) |
| EN ISO 11357-7:2015 | Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015) |
| EN 15051-1:2013 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 1: Requirements and choice of test methods |
| EN 15051-2:2013+A1:2016 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method |
| CEN ISO/TS 12025:2015 | Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012) |
| EN ISO 3219:1994 | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
| CEN ISO/TS 80004-6:2015 | Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013) |
| EN 15051-3:2013 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 3: Continuous drop method |
| ISO/TR 13329:2012 | Nanomaterials — Preparation of material safety data sheet (MSDS) |
| ISO 14577-1:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method |
| ISO/TS 80004-1:2015 | Nanotechnologies — Vocabulary — Part 1: Core terms |
| ISO 14577-3:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks |
| ISO/TS 12025:2012 | Nanomaterials Quantification of nano-object release from powders by generation of aerosols |
| ISO 14577-2:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines |
| EN ISO 14577-2:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015) |
| ISO 11357-7:2015 | Plastics Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics |
| EN ISO 14577-4:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016) |
| ISO/TS 80004-2:2015 | Nanotechnologies — Vocabulary — Part 2: Nano-objects |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.