S.R. CEN/TS 16526:2013
Current
The latest, up-to-date edition.
SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS
Hardcopy , PDF
English
01-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Symbols
6 Conditioning and test conditions
7 Sampling, preparation and handling of test pieces
and expression of test results
8 Test methods
9 Marking
10 Test report
Annex A (normative) - Test methods
Annex B (informative) - Characterization of sandwich
boards for different applications in furniture
manufacturing
Bibliography
Specifies terms, describes a classification and defines test methods for flat, factory made, non-structural, faced and unfaced sandwich boards for use in furniture manufacturing (SWB-F) for dry (service class 1) and humid conditions (service class 2).
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| CEN/TS 16526:2013 | Identical |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 14323:2017 | Wood-based panels - Melamine faced boards for interior uses - Test methods |
| EN 950:1999 | Door leaves - Determination of the resistance to hard body impact |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 322:1993 | Wood-based panels - Determination of moisture content |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
| DIN 68874-1:1985-01 | SHELVES AND SHELF BEARERS IN CABINET FURNITURE; REQUIREMENTS AND TESTING WHEN MOUNTED IN THE CABINET |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| EN 312:2010 | Particleboards - Specifications |
| EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 1383:2016 | Timber structures - Test methods - Pull through resistance of timber fasteners |
| EN 325:2012 | Wood-based panels - Determination of dimensions of test pieces |
| EN 1294:2000 | Door leaves - Determination of the behaviour under humidity variations in successive uniform climates |
| EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 320:2011 | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 14727:2005 | Laboratory furniture - Storage units for laboratories - Requirements and test methods |
| EN 316:2009 | Wood fibre boards - Definition, classification and symbols |
| EN 313-2:1999 | Plywood - Classification and terminology - Part 2: Terminology |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| EN 383:2007 | Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners |
| EN 309:2005 | Particleboards - Definition and classification |
| EN 1464:2010 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| EN 636:2012+A1:2015 | Plywood - Specifications |
| EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
| EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
| EN 311:2002 | Wood-based panels - Surface soundness - Test method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.