S.R. CEN/TS 15679:2007
Current
Current
The latest, up-to-date edition.
THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2007
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Characteristics
5.1 General
5.2 Equilibrium moisture content
5.3 Dimensional stability
5.4 Durability: resistance to attack by fungi
5.5 Density
5.6 Mechanical properties
5.6.1 Bending strength and modulus of elasticity
5.6.2 Impact strength
5.6.3 Surface hardness
5.6.4 Tension perpendicular to grain
5.6.5 Compression strength
5.6.6 Strength of mechanical fasteners
5.7 Thermal conductivity
5.8 Adhesive bonding of TMT
5.9 Adhesion of coating to TMT
5.10 Emissions
5.11 Reaction to fire
5.12 Durability: resistance to attack by insects
5.13 Colour
6 Assessment of characteristics
6.1 General
6.2 Sampling
6.3 Factory production control
6.3.1 General
6.3.2 Characteristics of the TMT product to be controlled
7 Marking
Annex A (informative) Examples of characteristics
A.1 Equilibrium moisture content
A.2 Dimensional stab
A.3 Biological durability
Bibliography
Provides definitions and characteristics for Thermally Modified Timber.
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| CEN/TS 15679:2007 | Identical |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| EN 844-2:1997 | Round and sawn timber - Terminology - Part 2: General terms relating to round timber |
| EN 20-2:1993 | Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Part 2: Application by impregnation (Laboratory method) |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| ISO 13787:2003 | Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity |
| EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
| EN 1995-2:2004 | Eurocode 5: Design of timber structures - Part 2: Bridges |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 1910:2016 | Wood flooring and wood panelling and cladding - Determination of dimensional stability |
| EN 350-1:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 1: Guide to the principles of testing and classification of the natural durability of wood |
| EN 844-8:1997 | Round and sawn timber - Terminology - Part 8: Terms relating to features of round timber |
| ISO 105-A03:1993 | Textiles Tests for colour fastness Part A03: Grey scale for assessing staining |
| EN 84:1997 | Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure |
| EN 204:2016 | Classification of thermoplastic wood adhesives for non-structural applications |
| EN 844-4:1997 | Round and sawn timber - Terminology - Part 4: Terms relating to moisture content |
| EN 47:2016 | Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method) |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 1380:2009 | Timber structures - Test methods - Load bearing nails, screws, dowels and bolts |
| EN 927-1:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection |
| EN 330:2014 | Wood preservatives - Determination of the relative protective effectiveness of a wood preservative for use under a coating and exposed out-of-ground contact - Field test: L-joint method |
| EN 844-5:1997 | Round and sawn timber - Terminology - Part 5: Terms relating to dimensions of round timber |
| EN 275:1992 | Wood preservatives - Determination of the protective effectiveness against marine borers |
| EN 1382:2016 | Timber Structures - Test methods - Withdrawal capacity of timber fasteners |
| EN ISO 13787:2003 | Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003) |
| EN 844-11:1998 | Round and sawn timber - Terminology - Part 11: Terms relating to degrade by insects |
| EN 1001-2:2005 | Durability of wood and wood based products - Terminology - Part 2: Vocabulary |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| EN 844-7:1997 | Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber |
| EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| EN 1383:2016 | Timber structures - Test methods - Pull through resistance of timber fasteners |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 12524 : 2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
| ENV 807:2001 | Wood preservatives - Determination of the effectiveness against soft rotting micro-fungi and other soil inhabiting micro-organisms |
| EN 350-2:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
| ENV 12169 : 2000 | CRITERIA FOR THE ASSESSMENT OF CONFORMITY OF A LOT OF SAWN TIMBER |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| EN 14762:2006 | Wood flooring - Sampling procedures for evaluation of conformity |
| EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
| EN 320:2011 | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
| EN 844-3:1995 | Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| EN 408:2010+A1:2012 | Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties |
| EN 844-1:1995 | Round and sawn timber - Terminology - Part 1: General terms common to round timber and sawn timber |
| EN 844-12:2000 | Round and sawn timber - Terminology - Part 12: Additional terms and general index |
| ISO 16000-9:2006 | Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method |
| EN 927-5:2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability |
| EN 927-2:2014 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification |
| EN 844-10:1998 | Round and sawn timber - Terminology - Part 10: Terms relating to stain and fungal attack |
| CEN/TS 12037:2003 | Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method |
| EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| EN 20105-A03:1994 | Textiles - Tests of colour fastness - Part A03: Grey scale for assessing staining (ISO 105-A03:1993) |
| EN 117:2012 | Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
| EN 460:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
| EN 844-6:1997 | Round and sawn timber - Terminology - Part 6: Terms relating to dimensions of sawn timber |
| EN 252:2014 | Field test method for determining the relative protective effectiveness of a wood preservative in ground contact |
| EN 1534:2010 | Wood flooring - Determination of resistance to indentation - Test method |
| EN 383:2007 | Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners |
| ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
| EN 927-6:2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| EN 335-1:2006 | Durability of wood and wood- based products - Definition of use classes - Part 1: General |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ENV 14464 : DRAFT 2002 | SAWN TIMBER - METHOD FOR ASSESSMENT OF CASE-HARDENING |
| EN 844-9:1997 | Round and sawn timber - Terminology - Part 9: Terms relating to features of sawn timber |
| EN 384:2016 | Structural timber - Determination of characteristic values of mechanical properties and density |
| CEN/TS 14966:2005 | Wood-based panels - Small scale indicative test methods for certain mechanical properties |
| EN 927-3:2012 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.