S.R. CEN/TR 15419:2017
Current
Current
The latest, up-to-date edition.
PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2017
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Selection
5 Use and training for safe use
6 Care
7 Maintenance
Annex A (informative) - Rationale
Annex B (informative) - Risk assessment scheme
Annex C (informative) - Example of a label
Bibliography
Primarily intended for users, specifiers and others with responsibility for the procurement and provision of chemical protective clothing. It is also intended to be used by manufacturers in their dialogue with the users of PPE.
| DevelopmentNote |
Supersedes I.S. CEN TR 15419. (12/2017)
|
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| CEN/TR 15419:2017 | Identical |
| EN 943-1:2015 | Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
| EN 530:2010 | Abrasion resistance of protective clothing material - Test methods |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| EN 943-2:2002 | Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET) |
| EN ISO 374-1:2016 | Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) |
| EN ISO 13982-2:2004 | Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004) |
| EN 13034:2005+A1:2009 | Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
| ISO 6530:2005 | Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids |
| ISO 9073-4:1997 | Textiles Test methods for nonwovens Part 4: Determination of tear resistance |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| EN 14786:2006 | Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test |
| EN ISO 17491-3:2008 | Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008) |
| EN ISO 7854:1997 | Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995) |
| EN ISO 14116:2015 | Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing (ISO 14116:2015) |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| ISO 13688:2013 | Protective clothing — General requirements |
| EN 1149-1:2006 | Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
| EN 16523-1:2015 | Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact |
| ISO 14116:2015 | Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing |
| ISO 26986:2010 | Resilient floor coverings Expanded (cushioned) poly(vinyl chloride) floor covering Specification |
| EN ISO 9073-4:1997 | Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997) |
| EN 863:1995 | Protective clothing - Mechanical properties - Test method: Puncture resistance |
| EN 13274-4:2001 | Respiratory protective devices - Methods of test - Part 4: Flame tests |
| ISO/TR 11610:2004 | Protective clothing — Vocabulary |
| EN 133:2001 | Respiratory protective devices - Classification |
| ISO 13982-1:2004 | Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) |
| ISO 374-1:2016 | Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks |
| ISO 7854:1995 | Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing |
| EN 420:2003+A1:2009 | Protective gloves - General requirements and test methods |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN ISO 6530:2005 | Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
| EN 14325:2004 | Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
| EN ISO 13938-1:1999 | Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999) |
| ISO 13982-2:2004 | Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN ISO 13688:2013 | Protective clothing - General requirements (ISO 13688:2013) |
| EN 14605:2005+A1:2009 | Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
| ISO 17491-3:2008 | Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) |
| ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
| EN 1149-5:2008 | Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements |
| ISO 6529:2013 | Protective clothing Protection against chemicals Determination of resistance of protective clothing materials to permeation by liquids and gases |
| EN 464:1994 | Protective clothing - Protection against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test) |
| ISO 17491-4:2008 | Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) |
| EN 1149-3:2004 | Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
| EN 1073-2:2002 | Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.