QQ-N-290 Revision A:1971
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
NICKEL PLATING (ELECTRODEPOSITED)
Available format(s)
PDF
Superseded date
07-01-2000
Publisher
Requirements for nickel plating, electrodeposited on steel, zinc/zinc alloys and copper/copper alloys.
| DevelopmentNote |
Notice 1 - Notice of cancellation/Superseded by SAE AMS-QQ-N-290 (06/2001)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| Standards | Relationship |
| SAE AMS2403M | Similar to |
| SAE AMSQQN290C | Similar to |
| MIL-C-24938 Revision A:1993 | COATS, FIREMEN'S, STRUCTURAL/ALUMINIZED PROXIMITY |
| MIL-I-8580 Revision B:1965 | INDICATOR, TACHOMETER, HELICOPTER, 0-4000 RPM TYPE MA 1 |
| MIL-L-16383 Revision H:1988 | LIFE PRESERVER, CARBON DIOXIDE INFLATABLE, UNDERWATER DEMOLITION TEAM |
| MIL-E-16400 Revision H:1987 | ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
| FF-R-556 Revision D:1981 | RIVET, SOLID, SMALL, RIVET, SPLIT, SMALL, RIVET TUBULAR SMALL, FLAT WASHER (BURR) AND CAP RIVET, GENERAL PURPOSE |
| MIL-A-83577 Revision B:1988 | ASSEMBLIES, MOVING MECHANICAL, FOR SPACE AND LAUNCH VEHICLES, GENERAL SPECIFICATION FOR |
| SAE AS5604A | Compass; Magnetic, Pilot\'s Standby |
| MIL C 24308 : C | CONNECTORS, ELECTRIC, RECTANGULAR, NON-ENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR |
| MIL-C-83515 Revision A:1985 | CONNECTOR, TELECOMMUNICATION, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
| MIL-H-6875 Revision H:1989 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| MIL C 21097 : E | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
| MIL-HDBK-11991 Base Document:1996 | DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS |
| MIL-C-27298 Revision B:1980 | CLOCK, AIRCRAFT, MECHANICAL ABU AND 9-A |
| MIL B 81757 : C | BATTERIES & CELLS STORAGE, NICKEL CADMIUM, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL L 24047 : A | LIFE PRESERVER, YOKE TYPE, SCUBA, U.S. NAVY MARK 3 |
| MIL-STD-193 Revision L:1991 | PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS |
| MIL C 3607 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES PULSE GENERAL SPECIFICATION FOR |
| MIL S 83734 : F | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE PACKAGES (DIPS) & SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR |
| MIL-C-10750 Revision J:1988 | COAT, FIREMEN'S |
| MIL C 39024 : A | CONNECTOR, ELECTRICAL, TEST POINT TYPE, PANEL TYPE, SINGLE TEST POINT (THREADED), HIGH VOLTAGE |
| MIL-C-7135 Revision F:1967 | Compressor, Pneumatic, 3,000 PSI -- 2 SCFM Aero 2A (*), Aero 2A-1 (*), Aero 2B (*), and Aero 2B-1 (*) |
| MIL-I-81186 Base Document:1966 | INDICATOR, RATE OF FUEL FLOW SYNCHRO TYPE, M590360 |
| MIL-C-21850 Revision C:1979 | COVERALLS, CATAPULT, CREWMEN'S |
| ARINC 650 : 1994 | INTEGRATED MODULAR AVIONICS PACKAGING AND INTERFACES |
| MIL C 39012/25 : E | CONNECTORS, COAXIAL, RADIOFREQUENCY (HARDWARE FOR RADIOFREQUENCY COAXIAL CONNECTORS) |
| MIL-S-38533 Revision A:1985 | SOCKET, CHIP CARRIER, GENERAL SPECIFICATION FOR |
| MIL-C-3956 Revision C:1970 | CLOCK, MESSAGE CENTER M2 |
| MIL-C-5499 Revision B:1984 | CORE, AIRCRAFT, HIGH PRESSURE AIR VALVE |
| MIL-P-43951 Revision A:1989 | PADLOCK AND PADLOCK SETS, KEY OPERATED, MEDIUM SECURITY, REGULAR SHACKLE |
| DOD-E-83578 Revision A:1987 | EXPLOSIVE ORDNANCE FOR SPACE VEHICLES, GENERAL SPECIFICATION FOR (METRIC) |
| MIL R 39016 : E | RELAY, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-S-21944 Revision B:1967 | SWITCH, THERMOSTATIC, MARK 3 MOD O |
| MIL B 5423 : C | BOOT, DUST AND WATER SEAL 1 [FOR TOGGLE AND PUSHBUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY ACTUATED PARTS] GENERAL SPECIFICATION FOR |
| MIL-C-23367 Base Document:1963 | Computer, Flight Director, Aircraft |
| PREN 3373-013 : 200P1 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 013: IN-LINE SPLICES, INSULATED AND MOISTURE RESISTANT, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO 260 DEGREES C - PRODUCT STANDARD |
| ASTM B 851 : 2004 | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
| IEC PAS 62250:2001 | Qualification and performance specification for rigid printed boards (IPC 6012A with Amendment 1) |
| MIL-G-16491 Revision F:1989 | GROMMET, METALLIC |
| MIL-HDBK-2193 Base Document:1994 | HYDRAULIC SYSTEM COMPONENTS, SHIP |
| MIL F 19207 : D (1) SUPP 1 | FUSEHOLDER, EXTRACTOR POST TYPE, BLOWN FUSE INDICATING AND NONINDICATING GENERAL SPECIFICATION FOR |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| MIL-STD-2000 Revision A:1991 | STANDARD REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| MIL S 8805 : D | SWITCHES, AND SWITCH ASSEMBLIES, SENSITIVE AND PUSH, SNAP ACTION, GENERAL SPECIFICATION FOR |
| MIL S 22885 : E | SWITCH, PUSH BUTTON, ILLUMINATED, GENERAL SPECIFICATION FOR |
| MIL-H-8775 Revision D:1976 | HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES GENERAL SPECIFICATION FOR |
| MIL S 83504 : A | SWITCH, DUAL IN AND LINE PACKAGE (DIP), GENERAL SPECIFICATION FOR |
| MIL PRF 24308 : D | CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR |
| MIL S 3786 : F | SWITCH, ROTARY, CLOSED CONSTRUCTION, 2 AMPERES, LOW LEVEL, POSITIVE SHAFT GROUNDING STYLE SR04 |
| IPC D 949 : 1987 | RIGID MULTILAYER PRINTED BOARDS, DESIGN STANDARD FOR, |
| MIL-B-43866 Revision C:1986 | BREAD-SLICING MACHINE, ELECTRIC-OPERATED, MULTIPLE KNIFE |
| MIL V 5523 : D | VALVE, RELIEF, HYDRAULIC PRESSURE |
| 01/705968 DC : DRAFT MAR 2001 | PREN 3373-013 - AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 013: IN-LINE SPLICES, INSULATED AND MOISTURE-PROOF, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO +260 DEGREE C - PRODUCT STANDARD |
| MIL R 28776 : C | RELAY, HYBRID, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-S-24187 Revision E:1991 | SWITCH ASSEMBLIES, LINEAR MOVEMENT, MANUAL AND REMOTE OPERATION, GENERAL SPECIFICATION FOR |
| MIL-C-39029 Revision D:1988 | CONTACT, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR |
| MIL-T-55155 Revision C:1993 | TERMINALS, FEEDTHRU (INSULATED) AND TERMINALS, STUD (INSULATED AND NONINSULATED), GENERAL SPECIFICATION FOR |
| MIL-C-4109 Revision F:1986 | COUPLING ASSEMBLY, LOW PRESSURE, AIR HOSE, QUICK-DISCONNECT |
| MIL-C-13516-4 Revision C:1991 | CIRCUIT BREAKERS; 28 VOLT DC, MANUAL, NONWATERPROOF, 35 TO 150 AMP |
| MIL-C-24217 Revision A:1984 | CONNECTOR, ELECTRICAL, DEEP SUBMERGENCE, SUBMARINE |
| MIL-STD-1250 Revision A:1992 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL S 83502 : B | SOCKET, PLUG IN ELECTRONIC COMPONENTS, ROUND STYLE, GENERAL SPECIFICATION FOR |
| MIL F 28861 : B | FILTER AND CAPACITOR, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| MIL-D-83029 Revision A:1968 | DRIVE ASSEMBLY, CONSTANT SPEED, GENERAL SPECIFICATION FOR |
| MIL-P-5994 Revision D:1972 | PUMP, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY, GENERAL SPECIFICATION FOR |
| MIL G 26611 : D | GENERATOR, TACHOMETER GEU-7/A, MINIATURE |
| MIL-G-23337 Base Document:1962 | GAGE - PRESSURE, DIAL INDICATING |
| MIL G 87077 : A | GLOVE, FIREMENS, ALUMINIZED, PROXIMITY |
| MIL-I-983 Revision E:1966 | INTERIOR COMMUNICATION EQUIPMENT, NAVAL SHIPBOARD, BASIC DESIGN REQUIREMENTS FOR |
| GG L 256 : E | LETTERING SETS AND ACCESSORIES |
| MIL C 38999 : J | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS |
| MIL-C-5604 Revision B:1962 | COMPASS, MAGNETIC, PILOTS STANDBY |
| MIL-C-29145 Revision B:1984 | COAT, FIREMANS, ALUMINIZED PROXIMITY |
| MIL-H-87111 Revision A:1984 | HEAT SINKS, SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
| ASTM F 1245 : 1989 : R2012 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-HDBK-1250 Revision A:1995 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL-STD-1516 Revision B:1990 | UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL |
| MIL C 55302/62 : G | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS, AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SQ.GRID) |
| MIL-F-50983 Revision C:1985 | FUZE, MT, SQ, M577 LOADING, ASSEMBLING, PACKING AND METAL PARTS, AND FUZE, MT, SQ, M582 METAL PARTS |
| MIL-P-8564 Revision D:1970 | PNEUMATIC SYSTEM COMPONENTS, AERONAUTICAL, GENERAL SPECIFICATION FOR [ASG] |
| MIL B 8075 : D | BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF |
| MIL S 19500/404 : B | SEMICONDUCTOR DEVICE, SILICON, HIGH-VOLTAGE RECTIFIER MODULE TYPES 1N5597, 1N5600 AND 1N5603 |
| MIL C 83723 : E | CONNECTORS, ELECTRICAL (CIRCULAR, ENVIRONMENT RESISTING) RECEPTACLES AND PLUGS GENERAL SPECIFICATION FOR |
| MIL-DTL-85110 Revision B:1997 | BAR, REPEATABLE RELEASE HOLDBACK (RRHB), AIRCRAFT LAUNCHING, GENERAL REQUIREMENT FOR |
| ASTM F 1245 : 1989 | SPECIFICATION FOR FAUCETS, SINGLE AND DOUBLE, COMPRESSION AND SELF-CLOSING TYPE, SHIPBOARD |
| ASTM B 851 : 2004 : R2009 | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
| MIL PRF 83502 : C | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, ROUND STYLE, GENERAL SPECIFICATION FOR |
| MIL C 83503 : A | CONNECTOR, ELECTRICAL, FLAT CABLE, AND/OR PRINTED WIRING BOARD, NONENVIRONMENTAL GENERAL SPECIFICATION FOR |
| MIL S 5002 : D | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| MIL S 6807 : D | SWITCHES, ROTARY, SELECTOR POWER - GENERAL SPECIFICATION FOR |
| MIL-H-28719 Base Document:1970 | HEADER, HERMETICALLY SEALED |
| MIL-S-8812 Revision D:1975 | STEERING SYSTEM, AIRCRAFT GENERAL REQUIREMENTS FOR |
| DOD-B-24504 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER ZINC ALKALINE TYPE (FOR DOLPHIN) (METRIC) |
| MIL-L-24247 Revision C:1990 | LIFE PRESERVER, VEST TYPE, U.S. NAVY, MARK 1 |
| MIL-B-3493 Revision D:1985 | BUCKLES, END BAR WITH TONGUE (FOR LEATHER) |
| MIL-M-7997 Revision C:1981 | Motor, Aircraft Hydraulic, Constant Displacement General Specification for |
| ASTM B 851 : 2004 : R2014 | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
| MIL C 22992 : E | CONNECTOR, PLUGS AND RECEPTACLES, ELECTRICAL, WATERPROOF, QUICK DISCONNECT, HEAVY DUTY TYPE GENERAL SPECIFICATION FOR |
| MIL-C-13516-7 Revision D:1991 | CIRCUIT BREAKERS; 28 VOLT DC, AUTOMATIC, NONWATERPROOF, 35 TO 150 AMP |
| GGG-S-735 Revision B:1976 | STAMPING AND MARKING EQUIPMENT; GENERAL SPECIFICATION FOR |
| MIL E 917 : E | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE) |
| MIL-C-81582 Revision B:1975 | CONNECTOR, ELECTRICAL, BAYONET COUPLING, ENVIRONMENTAL RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
| MIL-T-81272 Base Document:1966 | THERMOCOUPLE, ENGINE, CYLINDER, BAYONET TYPE, MS90324 |
| MIL-I-21203 Revision A:1962 | Indicator, Attitude, Spherical, Direct Reading, Fast Erecting, Electric Gyro |
| MIL-G-22169 Base Document:1959 | GYRO, VERTICAL AND MOUNT |
| MIL-S-9487 Revision C:1985 | SWITCH, TRIGGER, SINGLE POLE, TWO STAGE, MOMENTARY |
| MIL-N-85615-8 Base Document:1989 | Nut, Self-Sealing, Self-Locking, Alloy Steel, 125 KSI FTU, 250 Deg. F and 450 Deg. F |
| FF-N-845 Revision D:1981 | NUT, PLAIN, WING, INCH AND METRIC |
| FF-P-101 Revision F:1984 | PADLOCK |
| MIL B 8565 : J | BATTERY AND CELL, STORAGE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-B-1563 Revision C:1990 | BUTTONS, INSIGNIA AND FINDINGS (U.S.M.A.), GENERAL SPECIFICATION FOR |
| MIL-STD-275 Revision E:1984 | PRINTED WIRING - ELECTRONIC EQUIPMENT |
| MIL C 55302/61 : F | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG PIN CONTACTS DECADE INCRE 10-70 CONTACT INTERMEDIATE POSITIONS 14 24 54 36 56 66 FOR PRINTING WIRING BOARDS (.100 IN SPACING) |
| MIL-P-81728 Revision A:1973 | PLATING, TIN LEAD, (ELECTRODEPOSITED) |
| MIL S 22710 : E | SWITCHES, ROTARY (PRINTED CIRCUIT), (THUMBWHEEL, INLINE, AND PUSHBUTTON), GENERAL SPECIFICATION FOR |
| MIL-I-22075 Revision C:1984 | Indicator, Bearing-Distance-Heading ID-663D/U |
| MIL-STD-808 Revision A:1983 | FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT |
| MIL F 15160 : G | FUSE, INSTRUMENT, POWER, AND TELEPHONE, GENERAL SPECIFICATION FOR |
| MIL C 55302/63 : F | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY & ACCESSORIES, PLUG PIN CONTACTS DECADE INCRE 10-70 CONTACT INTERMEDIATE POSITIONS OF 14 24 44 54 & 26 36 56 66 FOR PRINTED WIRING BOARDS (.100 IN SPACING) |
| 01/705967 DC : DRAFT MAR 2001 | PREN 3373-012 - AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 012: IN-LINE SPLICES, INSULATED AND SEALED, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO +150 DEGREE C - PRODUCT STANDARD |
| A-A-55628 Revision A:1998 | NUT, PLAIN, CAP, HIGH CROWN UNC-2B AND UNF-2B |
| QQ-C-320 Revision B:1974 | CHROMIUM PLATING (ELECTRODEPOSITED) |
| MIL-A-37819 Revision A:1978 | ARTICULATOR, DENTAL, PLAIN LINE, LINGUAL ACCESS DESIGN, WITH CONDYLAR AND AUDITORY PINS, AND REPLACEMENT MOUNTING INSERTS |
| MIL-R-46085 Revision B:1984 | RHODIUM PLATING, ELECTRODEPOSITED |
| SAE AS7997 | Motors, Aircraft Hydraulic, Constant Displacement General Specification For |
| MIL-I-5488 Revision A:1957 | INDICATOR TURN AND SLIP 28V DC 2 3/4 SIX, TYPE MD 10 |
| MIL-I-5482 Revision C:1960 | INDICATOR, PRESSURE, SYNCHRO, AIRCRAFT 165 DEGREE SCALE |
| FF-N-836 Revision E:1994 | Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat |
| MIL C 55302 : E | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE |
| MIL S 12883 : D | SOCKET AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS GENERAL SPECIFICATION FOR |
| MIL-C-13516-8 Revision C:1992 | CIRCUIT BREAKERS; 28 VOLT DC, AUTOMATIC, NONWATERPROOF, 150 TO 200 AMP |
| ASTM F 1245 : 1989 : R1994 : EDT 1 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-I-18804 Revision B:1964 | Indicator, Vertical Speed, 0 - 6000 FPM, 2 Inch |
| MIL PRF 12883/51 : A | SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKET AND SOCKET ASSEMBLY FOR RELAYS, 4-POLE, 10 AMPERES |
| MIL-R-24358 Base Document:1968 | RESTORATION SHIPBOARD ELECTRONIC EQUIPMENT F, 1N AND 2N COGNIZANCE |
| MIL-H-87028 Revision B:1987 | HARNESS, DIVERS (MK-12) |
| MIL-I-21718 Base Document:1958 | Indicator, Airspeed, Pitot Static, Maximum Allowable Speed, 40-400 Knots |
| MIL S 8834 : F | SWITCH, TOGGLE, POSITIVE BREAK, GENERAL SPECIFICATION FOR |
| MIL-F-21346 Revision B:1976 | FUSEHOLDERS, BLOCK, AND SHROUD TYPE, AND ASSOCIATED FUSE CLIPS; GENERAL SPECIFICATION FOR |
| DOD-C-24594 Base Document:1979 | CELL, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DEEP SUBMERGENCE APPLICATIONS) (METRIC) |
| NNN-T-580 Base Document:1963 | TONG LABORATORY |
| MIL-I-58067 Revision A:1977 | INDICATOR, VERTICAL VELOCITY, RAPID RESPONSE ACCELERATION SENSITIVE, GENERAL SPECIFICATION FOR |
| AA-B-00540 Revision D Interim Revision:1978 | BOOKCASE SECTIONS, BASE AND TOP, STEEL, CONTEMPORARY STYLE |
| MIL-V-5622 Revision A:1963 | Volt-Ammeter, Dual Pointer Direct Current |
| MIL-S-3151 Revision A:1967 | SOUND LEVEL MEASURING AND ANALYZING EQUIPMENT |
| MIL C 55302/55 : F | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INT. POSITIONS OF 14, 24, 44, 54 & 26, 36, 56, 66 |
| MIL C 55302/158 : B | CONNECTOR, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, SOCKET CONTACTS, RIGHT ANGLE 64 OR 96 CONTACT POSITIONS FOR PRINTED BOARDS (. 100 INCH SPACING) |
| AA-C-001870 Base Document:1974 | COSTUMER, METAL, CONTEMPORARY STYLE |
| MIL M 7793 : F | METER, TIME TOTALIZING |
| MIL-P-55149 Revision B:1988 | POST, BINDING, ELECTRICAL (INSULATED AND UNINSULATED) GENERAL SPECIFICATION FOR |
| MIL-I-23264 Revision A:1968 | Insulators, Ceramic, Electrical and Electronic, General Specification for |
| MIL-I-85352 Base Document:1980 | INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE REMOTE CONTROL, DIRECT READING |
| MIL-G-81168 Base Document:1964 | GYROSCOPE, RATE INTEGRATING |
| MIL-C-81003 Base Document:1964 | Clinometer, Elevation ML-591/U |
| MIL-I-22126 Revision B:1972 | INDICATOR, TORQUEMETER, ENGINE, TURBOPROP |
| MIL-I-23366 Revision B:1987 | Indicator, Horizontal Situation ID-1013(*)/A |
| MIL-I-11132 Revision H:1987 | INSIGNIA; BRANCH OF SERVICE, GRADE, RANK, GARRISON CAP, AND SERVICE CAP, ROTC AND JROTC PERSONNEL, ARMY AND AIR FORCE |
| MIL-P-19692 Revision E:1994 | PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR |
| MIL R 83536 : SUPP 1 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY |
| MIL G 8348 : H | GAGE, ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE SELF CONTAINED |
| MIL-S-3644 Revision B:1985 | SHAFT ASSEMBLY, FLEXIBLE |
| MIL-B-55130 Revision A:1984 | BATTERIES, RECHARGEABLE, NICKEL CADMIUM SEALED |
| MIL-G-23723 Base Document:1964 | Gyroscope, Rate Switching CN-495/AJB-3 |
| MIL G 23701 : 0 | MILITARY SPECIFICATION GYROSCOPE, RATE SWITCHING AN/ASN-52 |
| MIL F 23419/11 : A | FUSES, CARTRIDGE, INSTRUMENT TYPE, STYLE FM11 (SUBMINIATURE - HIGH PERFORMANCE) |
| DOD-E-8983 Revision C:1977 | ELECTRONIC EQUIPMENT, AEROSPACE, EXTENDED SPACE ENVIRONMENT, GENERAL SPECIFICATION FOR |
| MIL C 55302/138 : B | CONNECTOR, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG, PIN CONTACTS, 160 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING) |
| MIL F 23419 : E | FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFICATION FOR |
| MIL C 28748 : B | CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE AND CRIMP TYPE CONTACTS, GENERAL SPECIFICATION FOR |
| GG-I-526 Revision B:1965 | INSTRUMENT, DENTAL AND SURGICAL; GENERAL SPECIFICATIONS |
| MIL C 28754 : D | CONNECTOR, ELECTRICAL, MODULAR AND COMPONENT PARTS, GENERAL SPECIFICATION FOR |
| MIL PRF 12883 : E | SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, GENERAL SPECIFICATION FOR |
| MIL STD 194 : A NOTICE 2 | SYSTEM FOR PAINTING AND FINISHING FIRE-CONTROL MATERIEL |
| MIL B 49450 : 0 | BATTERY, RECHARGEABLE, NICKEL CADMIUM, VENTED, AIRCRAFT,BB-716/A |
| MIL-D-81227 Revision B:1976 | DETECTOR KIT, WATER, AUTOMOTIVE, AVIATION FUEL |
| NNN-F-001643 Base Document:1971 | FORCEPS MICROSCOPE COVER GLASS |
| MIL-A-22165 Base Document:1959 | Amplifier, Compass, Servo (Type MF-1 Compass) |
| MIL-A-23899 Revision B:1984 | AURAL PROTECTOR, SOUND |
| DOD-B-24505 Revision C:1980 | BATTERY, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DSRV) (METRIC) |
| MIL-I-21685 Base Document:1958 | INDICATOR, COMPASS REPEATER, ROTATING DIAL, TYPE MW-2 |
| PREN 3373-012 : 200P1 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 012: IN-LINE SPLICES, INSULATED AND SEALED, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO 150 DEGREES C - PRODUCT STANDARD |
| ASTM F 1245 : 1989 : R2001 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| BS EN 3373-012:2005 | Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150°C. Product standard |
| IEC PAS 62249:2001 | Qualification and performance specification for flexible printed boards |
| BS EN 3373-013:2005 | Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260°C. Product standard |
| EN 3373-012:2005 | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 °C - Product standard |
| EN 3373-013:2005 | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 013: In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260 °C - Product standard |
| MIL-W-8982 Revision D:1989 | WRENCHES, SPLINED, HIGH STRENGTH, THIN WALL, GENERAL SPECIFICATION FOR |
| AA-C-001770 Revision A Interim Revision:1978 | CABINET, WARDROBE AND STORAGE, CONTEMPORARY STYLE, STEEL, GENERAL OFFICE |
| AA-D-001923 Base Document:1975 | DESK ATTACHMENTS, L, RETURN PLATFORM, CONTEMPORARY STYLE |
| MIL P 43607 : G | PADLOCK, KEY OPERATED, HIGH SECURITY, SHROUDED SHACKLE |
| 00/717161 DC : 0 | PREN 3373-008 - AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRICAL CONDUCTORS - PART 008: COPPER LUGS, NICKEL PLATED, RING SHAPED, FOR COPPER CONDUCTORS, NICKEL PLATED FOR INCH SERIES STUDS UP TO +340 DEGREE C - PRODUCT STANDARD |
| H-B-00481 Revision D:1970 | BRUSHES, SANITARY |
| DOD-B-24507 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR NR-1) (METRIC) |
| MIL C 17850 : A | COMPASS MAGNETIC, CARD, POCKET, TYPE MC-1 |
| MIL S 8932 : A | SWITCH, PRESSURE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL S 15291 : E | SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR |
| MIL-C-22249 Revision B:1989 | CONNECTOR SET, ELECTRICAL, HERMETICALLY SEALED, SUBMARINE |
| MIL-P-21415 Revision C:1973 | PROTECTIVE FINISH AND PAINTING FOR POLARIS FLEET BALLISTIC MISSILE |
| MIL-B-2883 Revision D:1988 | BOATSWAIN'S PIPE |
| MIL C 55302/132 : B | CONNECTOR, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES RECEPTACLE, SOCKET CONTACTS, STRAIGHT THROUGH, 64 OR 96 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING) |
| AA-D-001918 Base Document:1975 | DESK, FLAT TOP, STEEL, CONTEMPORARY STYLE |
| SAE AS 85075 : 2000 | TIE DOWN ASSEMBLY, HELICOPTER BLADE, GENERAL SPECIFICATION FOR |
| MIL C 55116 : B | CONNECTOR, MINIATURE AUDIO, FIVE PIN |
| MIL-C-28859 Revision B:1990 | CONNECTOR COMPONENT PART, ELECTRICAL BACK PLANE, PRINTED WIRING, GENERAL SPECIFICATION FOR |
| MIL C 28804 : C | CONNECTORS, ELECTRIC, RECTANGULAR HIGH DENSITY, POLARIZED CENTER JACKSCREW |
| DOD-HDBK-343 Base Document:1986 | DESIGN, CONSTRUCTION, & TESTING REQUIREMENTS FOR ONE OF A KIND SPACE EQUIPMENT |
| MIL C 31031 : 0 | CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES GENERAL SPECIFICATION FOR |
| MIL-HDBK-1568 Base Document:1996 | MATERIAL AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN AEROSPACE WEAPONS SYSTEMS |
| MIL-B-40098 Revision H:1989 | BURNER UNIT, GASOLINE, FIELD RANGE OUTFIT, M2A |
| MIL-V-15020 Revision F:1968 | VALVE, FLUSH (SHIPBOARD) |
| 06/30158008 DC : 0 | BS EN 3373-014 - AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 014: IN-LINE SPLICES, INSULATED AND SEALED, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO 200 DEGREES C - PRODUCT STANDARD |
| MIL-B-55252 Revision B:1992 | BATTERIES, NON-RECHARGEABLE, MAGNESIUM |
| MIL-G-5678 Revision C:1964 | GAGE PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE |
| MIL G 5413 : D NOTICE 1 | GENERATOR, TACHOMETER, FOUR POLE |
| MIL-I-5415 Revision C:1987 | INDICATOR, AIR SPEED, PITOT STATIC PRESSURE GENERAL SPECIFICATION FOR |
| IPC FC 240 : B1974 | SPECIFICATION FOR SINGLE-SIDED FLEXIBLE PRINTED WIRING |
| MIL-F-64042 Revision A:1986 | FUZE, MT, SQ, M577A1 LOADING, ASSEMBLING, PACKING, AND METAL PARTS FUZE, MT, SQ, M582A1 METAL PARTS |
| MIL-W-81840 Base Document:1972 | WHEEL, PEENING, ROTARY FLAP |
| MIL S 21604 : D | SWITCHES, ROTARY, MULTIPOLE AND SELECTOR - GENERAL SPECIFICATION FOR |
| MIL-STD-2118 Base Document:1984 | FLEXIBLE AND RIGID FLEX PRINTED WIRING FOR ELECTRONIC EQUIPMENT DESIGN REQUIREMENTS FOR |
| MIL-C-23157 Revision D:1979 | CLIPBOARD, PILOTS, MXU-163/P AND MARK 2A |
| MIL-T-5583 Revision C:1987 | Transmitter, Position, 28 Volts DC |
| MIL C 55302/31 : J | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, KEYING ACCESSORIES |
| MIL-P-55624 Base Document:1971 | PROTECTOR, ELECTRICAL COMMUNICATION CIRCUITS GENERAL SPECIFICATION FOR |
| MIL-I-8974 Revision A:1981 | INDICATOR, EVENT COUNTING, GENERAL SPECIFICATION FOR |
| MIL F 10884 : G | FASTENERS, SNAP |
| MIL-B-55118 Revision A:1971 | BATTERIES, STORAGE, (CELLS) VENTED, NICKEL CADMIUM |
| AA-S-271 Revision D:1967 | SHELVING, STORAGE AND DISPLAY, STEEL, INTERCHANGEABLE, NUT AND BOLT TYPE |
| MIL C 55302/65 : G | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY & ACCESSORIES RECEPTACLE SOCKET CONTACTS DECADE INCRE 10-70 CONTACT INTERMEDIATE POSITIONS OF 14 24 44 54 & 26 36 56 66 FOR PRINTED WIRING BOARDS (.100 INCH SPACING) |
| MIL-B-25337 Revision B:1970 | BOTTLE ASSEMBLIES, VACUUM, AIRCRAFT |
| MIL-C-22585 Revision A:1984 | COMPUTER, PRESSURE REDUCTION, METEOROLOGICAL CP-402/UM() |
| GG-B-60 Revision D:1972 | BALL POINT PEN, SINGLE CARTRIDGE |
| MIL B 29361 : 0 | BATTERY, STORAGE, SILVER ZINC, VENTED, GENERAL SPECIFICATION FOR |
| MIL-I-23524 Revision A:1986 | INDICATOR, ATTITUDE DIRECTOR, REMOTE, ID 1329A (V) |
| MIL C 82624 : A | CELL, STORAGE, NICKEL-CADMIUM (FOR TALOS MISSILE) |
| MIL G 9398 : C | GENERATOR, TACHOMETER, TWO POLE HIGH TEMPERATURE AIRCRAFT |
| MIL-P-24764 Base Document:1991 | POWER SUPPLIES, SHIPBOARD, ELECTRONIC, GENERAL SPECIFICATION FOR |
| MIL-I-23832 Revision A:1980 | Indicator, Tachometer, Triple Pointer, Helicopter |
| MIL-I-81049 Revision A:1972 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, VOLTAGE COMPENSATED, MULTIFUNCTION |
| MIL-H-29144 Revision B:1985 | HOOD, FIREMANS,ALUMINIZED, PROXIMITY |
| GG-C-1282 Revision C:1985 | CURETTES, ALVEOLAR (MOLT AND MILLER) |
| MIL-F-82 Revision D:1969 | FOOD CARRIER INTERLOCKING POT HAND WITH FIVE 4 QUART POTS AND COVERS |
| MIL F 15160/28 : A NOTICE 1 | FUSE, STYLE F28 |
| MIL-I-7906 Revision A:1961 | INDICATOR, GYRO HORIZON, MANUALLY CAGED, ELECTRIC, TYPE MB 1 |
| MIL C 55181 : C | CONNECTOR, PLUG & RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF) TYPE MW, GENERAL SPECIFICATION FOR |
| MIL-R-11050 Revision B:1969 | RECTIFIER, METALLIC, SELENIUM |
| MIL C 55302/58 : H | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY & ACCESSORIES, RECEPTACLE SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SQ. GRID) |
| MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| MIL-L-15581 Revision K:1986 | LIFE PRESERVERS, CO[2] INFLATABLE, POUCH TYPE |
| MIL-H-639 Revision D:1986 | HOOK [FOR BELTS, STRAPS, AND EQUIPAGE ITEMS] |
| MIL-B-82623 Base Document:1973 | BATTERY, STORAGE, NICKEL CADMIUM (FOR TALOS MISSILE) |
| MIL-B-55679 Base Document:1969 | BATTERY, DRY (SPECIAL PURPOSE) |
| SAE AS23899A | Aural Protector, Sound |
| SAE AS 40401 : 2013 | SOLENOID, ELECTRICAL, GENERAL SPECIFICATION FOR |
| SAE AS5994A | Pump Units, Hydraulic, Electric Motor Driven, Variable Delivery |
| ASTM F 1245 : 1989 : R2006 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.