PREN 795 : DRAFT 2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES
07-01-2012
01-12-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Material
4.2.1 Functionality following - the corrosion
resistance test
4.2.2 Anchor line
4.2.3 Rope and webbing
4.2.4 Connectors
4.3 Design and ergonomics
4.4 Specific requirements
4.4.1 Type tests for Class A anchor devices
4.4.2 Class B type tests for transportable
temporary anchor devices
4.4.3 Class C type tests for flexible anchor lines
4.4.4 Class D type test for rigid anchor lines
4.4.5 Class E type test for deadweight anchor devices
5 Test methods
5.1 General
5.2 Apparatus
5.2.1 Test lanyard
5.2.2 Dynamic test apparatus
5.2.3 Static strength test apparatus
5.2.4 Dynamic performance test apparatus for Class E
5.3 Class A anchor devices
5.3.1 General
5.3.2 Deformation test
5.3.3 Dynamic test
5.3.4 Static strength
5.4 Class B anchor devices
5.4.1 General
5.4.2 Deformation test
5.4.3 Dynamic test
5.4.4 Static strength
5.5 Class C anchor devices
5.5.1 General
5.5.2 Dynamic test
5.5.3 Deformation test
5.5.4 Static test
5.6 Class D anchor devices
5.6.1 Dynamic test
5.6.2 Deformation test
5.6.3 Static strength
5.7 Class E anchor devices
5.7.1 General
5.7.2 Dynamic test
5.7.3 Post-arrest suspension test
5.7.4 Deformation test
5.7.5 Static strength
5.8 Corrosion resistance
6 Marking
7 Information supplied by the manufacturer
Annex A (informative) - Guidance for installation
A.1 General
A.2 Class B anchor devices
A.3 Class C anchor devices
A.4 Class E anchor devices
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EC
Directive 89/686/EEC
Describes requirements for performance and associated test methods for single-user and multi-user anchor devices which can be removed from the structure.
| Committee |
TC 160
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| 09/30192714 DC : 0 | Identical |
| 03/103082 DC : 0 | Identical |
| 95/107917 DC : 0 | MACHINERY AND PLANT FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| 11/30197556 DC : 0 | BS ISO 7134 - EARTH-MOVING MACHINERY - GRADERS - TERMINOLOGY AND COMMERCIAL SPECIFICATIONS |
| 96/104566 DC : DRAFT JUN 1996 | PREN 12437-4 - SAFETY OF MACHINERY - PERFORMANCE MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 4: FIXED LADDERS |
| ISO 1141:2012 | Fibre ropes Polyester 3-, 4-, 8- and 12-strand ropes |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| EN 1496:2017 | Personal fall protection equipment - Rescue lifting devices |
| EN 517:2006 | Prefabricated accessories for roofing - Roof safety hooks |
| EN 892:2012+A1:2016 | Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods |
| ISO 2232:1990 | Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes — Specifications |
| ISO 1140:2012 | Fibre ropes Polyamide 3-, 4-, 8- and 12-strand ropes |
| EN 363:2008 | Personal fall protection equipment - Personal fall protection systems |
| EN 516:2006 | Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps |
| EN 1891:1998 | Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.